Schmidt And Bender Opmod 5-25x56 34mm Tube Pm Ii Psr Riflescope Limited Edition
Get your hands on one of the most exclusive optics on the market with this Schmidt and Bender OPMOD 5-25x56 34mm Tube PM II PSR Riflescope. These special edition Riflescopes brought to you by OPMOD were originally crafted for our elite military forces who truly put these to the test to ensure they were rugged, high quality, and most importantly, pinpoint accurate. For quicker target acquisition in the field, these scopes are outfitted with an illuminate Tremor2 reticle that offers a variety of markings to calculate precise shots while taking distance and windage into account. With only 300 pieces available, this Schmidt and Bender OPMOD Limited Edition Riflescope is a hot commodity, and you don't want to wait until the supply is out. Once these are gone, you won't be able to find this exact model again. Windage and elevation turrets offer optimal customization of your shots, and a generous eye relief allows for more comfortable aiming techniques. Hone in on your targets like never before and be the envy of your hunting buddies when you're one of the lucky few to look down the tube of this Schmidt and Bender OPMOD 5-25x56 PM II Exclusive Riflescope.
Save Big, Buy Direct.
Brand New Original Nightforce Optics, Schmidt Bender, Swarovski Optik, Carl Zeiss Sport Optics, Leupold Optics and more.
Makita 18v Li-ion 5 Piece Kit
Includes the following:
Makita Lithium-ion pack includes the following.
18V 2 speed hammer drill/driver (BHP453)
18V Impact Driver (BTD140)
18V Planer (BKP180)
18V Jigsaw (BJV180)
18V Torch(BML185)
3 x 3.0Ah Li-ion batteries
22 Minute charger
Carry Bag
Makita BHP453 18v LXT Combi Drill:
The BHP453 is one of Makita's best-selling cordless drills from the lithium ion range.
Featuring hammer action, 13mm keyless chuck, metal 2 speed gearbox and 16 torque setting for screw driving this is a tool well worth considering.
The gearbox delivers a high speed of 0 - 1,300rpm and low speed of 0 - 400rpm and boasts maximum torque of 42Nm.
This tool is ideal for tradesmen and will give many years of trouble free use.
Makita BTD140 18v Impact Driver:
The Makita BTD140 18v Li-Ion single speed, reversible impact driver delivering a massive 145Nm of torque the BTD140 is a must have tool.
With the emergence in the last few years of the cordless impact driver, screw driving has been taken to a new level.
In the past where you have relied on the power of the motor, the strength of the gear box and large capacity batteries to drive home large screws the impact driver has taken the load away from the motor and the gear box and relying more on the impact mechanism to deliver the torque required.
With its ¼" hex female drive allowing for a multitude of accessories with a ¼" fitting this tool will become the main tool for many a tradesman, weighing a mere 1.5kg this tool is not only used by people requiring vast amounts of torque but also people with a need for a compact and light screwdriver such as drywall installers with their repetitive screwdriving and kitchen fitters liking the compact design and the very convenient work light illuminating the work piece.
Makita BJV180 18v Jigsaw:
The Makita BJV180 18v variable speed and tool less blade change jigsaw has a whopping capacity of 135mm in wood and a capacity of 10mm in steel.
This machine has features such as a very convenient work light situated by the plunger to illuminate your cutting area, 4 stage orbital action to aid quality and speed of cut, a very efficient dust nozzle supplied as standard and a cover plate which can be added to the base to protect delicate surfaces and only weighing 2.8kg making this a truly fantastic machine.
Makita BKP180 18v Lithium-ion Planer:
The new Makita BKP180 planer has mains performance from a cordless planer and is the best in its class.
Featuring a full width solid 82mm bed with easy change reversible blades and a maximum planing depth of 2mm per pass this is an impressive machine.
The top handle features a rubberised grip and is positioned for excellent balance and single handed operation, and the side of the planer features a rebating edge capable of 9mm rebates.
This is a fully professional machine and a great addition to any carpenters or general builders tool kit and is also available as a body only for those who would like to add this to their existing kit.
Also Included:
18V Torch(BML185)
3 x 3.0Ah Li-ion batteries
22 Minute charger
1 x Standard carry bag
Uses Lithium-ion battery technology, which has a number of advantages: the batteries have no memory effect, which allows them to be recharged before they are completely discharged, they are up to 40% lighter than an Ni-CD or Ni-MH battery and they also maintain their charge noticeably longer which provides increased productivity.
* Color: Vintage Sunburst
* Top: Maple / poplar / maple
* Back: Maple / poplar / maple
* Sides: Maple / poplar / maple
* Neck: Mahogany
* Fingerboard: Rosewood with pearloid block inlays
* Number of frets: 22
* Pickups: Two '57 Classic Humbuckers
* Controls: Two each tone and volume with three-way pickup selector switch
* Machine heads: Schaller M6
* Hardware: Nickel plated
* Case: Black smooth levant
FOB PROCEDURES (TTV / TTT) (JURONG, HOUSTON, ROTTERDAM, FUJAIRAH) WITH USDT 2MIL AS (UNDERTABLE WITH VERIFIED FRESH SGS NOT MORE THAN 48HOURS)
1. The Buyer issues the following documents to the Seller:
â??(ICPO) Irrevocable Corporate Purchase Order, according to the seller's Procedures.
â?? Company Profile and Company Registration Documents.
â?? Client Information Sheet (CIS)
â?? Bank Confirmation/Comfort Letter (BCL)
â?? Passport of Owner/Director/Buyer.
â?? Valid and Approved Chartered Party Agreement (CPA) or Tank Storage Agreement (TSA)
2. The Seller issues a Commercial Invoice (CI) for the product available in the tanks at the port for the Buyer's assessment and acceptance. At the same time, the Seller will provide an NCNDA/IMFPA to the Buyer for completion.
3. The Buyer signs and returns the Commercial Invoice (CI), together with an acceptance letter of commitment to complete the transaction and the completed NCNDA/IMFPA
4. Within 48 to 72 hours, the Seller verifies the Buyer's Chartered Party Agreement (CPA) / Tank Storage Agreement (TSA), and upon successful verification and confirmation of the Vessel's / Tank Storage validity and availability, the Seller provides the following documents Proof of Products. (POP)
1. Certificate of Origin of the Product
2. Copy of Fresh SGS Report not more then 48hours or equivalent
3. Copy of Injection report
4. Authorization to Sell and Collect (ATSC)
5.Physical Authorization to Verify (ATV)
6. Unconditional Dip Test Authorization (UDTA)
5. Buyer issue Q88/TTVIA, or TSR/TTIA, The Buyer conducts a Dip Test(OPTIONAL) of the product in the Seller's Tanks at the Buyers expense and upon a successful dip test QnQ is Verified , Not More then 72Hours Buyer make Full payment of the total cargo, and also Transfer USDT 2mil to Seller as (UNDERTABLE) and PAYS FOR EXTENSION TANK 2DAYS
The Seller authorize the injection of the fuel into the Buyer's Vessel / Tank.
6. Within twenty-four (24) hours following the completion of the injection, the Seller transfers title to the Buyer
7. The Seller pays commission to all Mandates and Intermediaries according to the signed NCNDA/IMFPA that is involved in the transaction.
The monthly shipment continues as per the terms and conditions of the Commercial Invoice / SPA, and the transaction gets extended by providing a 12-month contract to the Buyer and Seller.
Price $680 with USDT $2,000,000
allocation is 100,000MT
At Adarista, we prioritize quality throughout our production process. Our HACPO undergoes rigorous testing to ensure that it meets the required standards for acidity, moisture content, and other key parameters. We work closely with reputable suppliers and implement strict quality control measures to deliver consistent and reliable HACPO to our customers.
Applications and Benefits:
High Acid Crude Palm Oil (HACPO) finds its applications across diverse industries. Its distinct acid profile makes it particularly suitable for:
Biodiesel Production: HACPO's higher acid content makes it an excellent feedstock for biodiesel production. Its unique composition provides enhanced performance characteristics and contributes to the overall quality of biodiesel fuel.
Industrial Processes: HACPO serves as a vital ingredient in various industrial processes, including manufacturing lubricants, soaps, detergents, and personal care products. Its acid properties impart specific qualities and functionalities, making it a preferred choice in these applications.
Chemical Industry: HACPO's acid composition enables its use in the production of fatty acids, oleochemical derivatives, and surfactants. These derivatives find their way into countless products that we encounter in our daily lives.
Commitment to Sustainability:
At Adarista, we are committed to sustainable practices and responsible sourcing. We work closely with our suppliers to ensure that our HACPO is derived from environmentally conscious and socially responsible palm oil plantations. By choosing our HACPO, you contribute to a more sustainable supply chain and support ethical practices.
The new dm2000vcm is the dm2000 version 2 plus a formidable array of state-of-the-art processing technologies that provide all-new production power. You now have extraordinary recreations of classic compression and eq units from the 70's, simulations of several legendary analog open-reel tape decks, a complete suite of unmatched-x reverb effects, a surround post-production package that is second to none, and even a selection of vintage stomp boxes to spice up your mixes. And all of this is right at your fingertips, with no need to patch in external processors.
