Isw's manufacturing site able to process fishmeal from cannery waste materials (head, tails & entrails) steamed dried to attained high quality with 60% protein content.
Fishmeal increases feed efficiency and optimal animal growth.
Steam dried fishmeal
Product : fishmeal protein of 55%
Description : fish meal is the ground and dried protein residue remaining of tuna after fat has been extracted in the normal rendering process.
Processing : fish is exposed to a maximum disc temperature of 120° c for approximately 30 to 40 minutes.Dried fish smashed by
Hammermill and cooled to room temperature.
Crude protein : min 55%
Tvbn: max 200mg/100gr
Moisture: max 10%
Fat: max 11%
Ash: max 15%
Crude fiber: max 2, 50%
Salt: max 2%
Ca: typical 1, 50%
P: typical 1, 35%
Microbiology examination
Mould & yeast : max 103 cfu/g
Coliform : negative
Salmonella : negative
Packaging : 50 kg in woven plastic bag
Storage : store tightly sealed in dry conditions in original packaging at a cool place & protected from the light
Shelf life : 12 months from the date of manufacture, when stored in unopened original packing under the above conditions
FOB PROCEDURES (TTV / TTT) (JURONG, HOUSTON, ROTTERDAM, FUJAIRAH) WITH USDT 2MIL AS (UNDERTABLE WITH VERIFIED FRESH SGS NOT MORE THAN 48HOURS)
1. The Buyer issues the following documents to the Seller:
â??(ICPO) Irrevocable Corporate Purchase Order, according to the seller's Procedures.
â?? Company Profile and Company Registration Documents.
â?? Client Information Sheet (CIS)
â?? Bank Confirmation/Comfort Letter (BCL)
â?? Passport of Owner/Director/Buyer.
â?? Valid and Approved Chartered Party Agreement (CPA) or Tank Storage Agreement (TSA)
2. The Seller issues a Commercial Invoice (CI) for the product available in the tanks at the port for the Buyer's assessment and acceptance. At the same time, the Seller will provide an NCNDA/IMFPA to the Buyer for completion.
3. The Buyer signs and returns the Commercial Invoice (CI), together with an acceptance letter of commitment to complete the transaction and the completed NCNDA/IMFPA
4. Within 48 to 72 hours, the Seller verifies the Buyer's Chartered Party Agreement (CPA) / Tank Storage Agreement (TSA), and upon successful verification and confirmation of the Vessel's / Tank Storage validity and availability, the Seller provides the following documents Proof of Products. (POP)
1. Certificate of Origin of the Product
2. Copy of Fresh SGS Report not more then 48hours or equivalent
3. Copy of Injection report
4. Authorization to Sell and Collect (ATSC)
5.Physical Authorization to Verify (ATV)
6. Unconditional Dip Test Authorization (UDTA)
5. Buyer issue Q88/TTVIA, or TSR/TTIA, The Buyer conducts a Dip Test(OPTIONAL) of the product in the Seller's Tanks at the Buyers expense and upon a successful dip test QnQ is Verified , Not More then 72Hours Buyer make Full payment of the total cargo, and also Transfer USDT 2mil to Seller as (UNDERTABLE) and PAYS FOR EXTENSION TANK 2DAYS
The Seller authorize the injection of the fuel into the Buyer's Vessel / Tank.
6. Within twenty-four (24) hours following the completion of the injection, the Seller transfers title to the Buyer
7. The Seller pays commission to all Mandates and Intermediaries according to the signed NCNDA/IMFPA that is involved in the transaction.
The monthly shipment continues as per the terms and conditions of the Commercial Invoice / SPA, and the transaction gets extended by providing a 12-month contract to the Buyer and Seller.
Price $680 with USDT $2,000,000
allocation is 100,000MT
14 Injection Moulded Products Suppliers
Short on time? Let Injection Moulded Products sellers contact you.
-Copy paper A4 80 G/m2.
-Size A4 (210 X 297 MM.)
-Two-sided usage gives the paper sheet high opacity.
-Smooth paper surface makes sharp printing and copying.
-Pack 500 Sheets(1 Ream)
-Moist protected wrapper
New 2011 Polaris Ranger RZR XP 900
Engine: 875cc DOHC Twin Cylinder four-stroke
Fueling: Electronic Fuel Injection
Transmission: Automatic PVT P/R/N/L/H; Shaft drive; On-Demand True AWD/2WD
Front Suspension: Dual A-arm Fox Podium X 2.0 (comp/rebound/preload adjust) 13.5 in. travel
Rear Suspension: Trailing arm Fox Podium X 2.0 (comp/rebound/preload adjust) 14 in. travel
Front/Rear Brakes 4-Wheel hydraulic disc with dual-piston front calipers
Front Wheel: 27 x 9-12; ITP 900 XCT tires
Rear Wheel: 27 x 11-12; ITP 900 XCT tires
Wheelbase: 81.4 in.
Dry Weight: 1190 lbs.
LxWxH: 108.4 x 64 x 73 in.
Ground Clearance: 13 in.
Fuel Capacity: 7.25 gal
Bed Dimensions: 23 x 38 x 10 in.
Box Capacity: 300 lbs.
Payload Capacity: 740 lbs.
Available Colors: Indy Red, White Lightning Limited Edition.
Black pepper is a common spice used in cooking. It comes from the dried fruit of the pepper plant, scientifically known as . The fruit is left to ripen on the vine, then harvested and dried. The dried fruit is known as a peppercorn, which is typically ground into a fine powder or used whole.
SPECIFICATION
Color : Grey to Black
Live Insect / Weevils : Nil
E.Coli : Max 3.0 MPN/G
Yeast & Mould : Max 1% by Weight / Max 500 CFU/G
Foreign Matter : Max 1%
Moisture Content : Max 13.5%
Packing : 25 KG PP Bag
Baja 5T-1 Truck Body
VVC/HD Shock Set
Outlaw Truck Wheels
High Flow Muffler
Anodized Aluminium Parts
Front & Rear Sway Bars
Modified Rear Shock Tower Brace
Double Wishbone Suspension
SFL-11MG Metal Gear Steering Servo
Heavy Duty Beadlock Wheels
Moulded Rear Spoiler
Heavy Duty Rear Dogbones
Disc Brake System
Full Ball Bearings
8000 RPM Clutch
Aluminium Alloy Diff Case
Extended Roll Cage
Includes:
Pre-Assembled 1/5th scale 2WD truck with Fuelie 26cc gasoline engine
2.4GHz radio set and SFL-11MG servo
(4) "AA" Batteries (for Transmitter)
6.0V 3000mAh Receiver Pack
Multi region Battery Charger
PRODUCT SPECIFICATION:
Bore/Stroke : 81 x 68mm
Carburetor/Injector : Floatless Carburator Mikuni BN38 x 2
Compression Ratio : 7.2:1
Cooling : Water Cooled
Displacement : 701cc
Dry Weight : 240kg
Engine Type : 2-stroke; 2-cylinder
Fuel : Regular Unleaded Gasoline
Fuel Capacity : 50L
Height : 1.16m
Length : 3.22m
Width : 1.17m
Hull Material : NanoXcel
Mixing Ratio : 50:1
Oil Capacity : 4.5L
Pump : 155mm Axial Flow
Starter : Electric
Lubrication Type : Oil Injection
Vehicle Capacity : 1-3 person
Storage Capacity : 84L
Colour : White with Shiny Green Metallic
INFORMATION:
Message and color, depending on the stock in the warehouse
The price includes VAT tax
Prices above Jakarta prices, excluding shipping costs outside Jakarta
Price does not include trailer (Price of trailer IDR 12,500,000 / unit)
Purchase by Pre-Order (3-4 days) and Down Payment
Prices are subject to change without notice
Mpte:
Please leave your messeage with details your email address in our inbox, thank you.
-
14 Injection Moulded Products Suppliers
Short on time? Let Injection Moulded Products sellers contact you.
