This OEM JV33 print head is used for Mimaki JV33 / JV5 printers.
It is a new generation print head that allows fast speed, high resolution printing with ecosolvent or mild solvent inks. This Mimaki JV5 original print head is delivered in a sealed Mimaki package (part number M007947). This print head is not the same as Epson DX5 printhead which does not fit the JV5 printer or JV33 printers running FW 3.1 or higher.
Specifications
PRF 10 Hz to 2000 Hz in 10 Hz increments
Pulse Width Adjustable from 25 ns to 5,000 ns (0.1 MHz) with PerfectSquare technology
Gain 0 to 110 dB
Receiver Bandwidth 0.2 MHz to 26.5 MHz at â??3 dB
System Linearity Horizontal: �± 0.5% FSW
Resolution 0.25% FSH, amplifier accuracy �± 1dB
Reject 0 to 80% FSH with Visual Warning
Amplitude Measurement 0 to 110% full screen height with 0.25% resolution
Automated Calibration Velocity, Zero Offset
Straight Beam (First Backwall or Echo-to-Echo)
Angle Beam (Soundpath or Depth)
Test Modes Pulse Echo, Dual, or Through Transmission
Range 3.36 mm to 13,388 mm (0.132 in. to 527.10 in.) at 5,900 m/s (0.2320 in./�µs)
Velocity 635 m/s to 15240 m/s (0.0250 in./�µs to 0.6000 in./�µs)
Zero Offset 0 to 750 �µs
Refracted Angle 0�° to 90�° in 0.1�° increments
Measurement Gates 2 fully independent gates for amplitude and TOF measurements
Measurements
Gate (1, 2) Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude
Echo-to-Echo Standard Gate 2-Gate 1, Optional IF Gate Tracking
Other measurements Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 A, B, C and D values, Reject Value, Echo to RefdB values
DAC/TCG Standard
DAC points Up to 50 points, 110 dB dynamic range
Special DAC modes Custom DAC (up to 6 curves), 20-80% View
Curved surface correction Standard OD or Bar correction for Angle Beam measurements
- Olympus NORTEC 600D Dual Frequency
- Calibration certificate
- Charger/adaptor
- AC power cord
- Getting Started leaflet
- NORTEC 600D Users Manual and PC interface program on CD-ROM
- Universal PowerLink eddy current probe cable
- MicroSD memory card, 2 GB (1 internal, 1 external)
- USB 2.0 (mini-AB) to PC cable
- 67 watt-hour battery for 600 Series products, 10.8 V, 6.2 Ah, 67 Wh
- AA battery holder for emergency use
- Factory-installed hand strap on left side of NORTEC 600D instrument
- Instrument transport case
- Olympus NEC-8196L Weld Inspection Kit
Features
Capable 212cc Loncin Engine
Provides reliable performance under heavy load
Emits reduced emissions and is EPA/CARB approved
Designed to provide effortless starting in the harshest temperatures
Compact 21-Inch Clearing Width
Great choice for those with small-mid sized driveways
Smaller storage footprint compared to most snowblowers
8" all-steel augers with a 10" 3-blade impeller capable of clearing snowfalls 20" tall
Manual 190�° Quick-Turn Chute
Allows snow to be thrown up to 36 feet in any direction
Whether it's over the fence or on your neighbor's car, you are in complete control
Forward & Reverse Speeds
Exercise (4) forward speeds depending on your preference
Convenient reverse speed allows you to let the machine do the work
Heavy treaded tires enhance traction for better maneuverability
Reversible Skid Shoes
Protects your concrete surfaces from scratches and/or skid marks
Double the product life by simply flipping them when worn down
Rugged Build
The exterior of the snow blower is completely rust-resistant
With proper maintenance, this snow thrower will go the distance
Clog Removal Tool Included
The Innov-X Omega X-Ray fluorescence spectrometer is a handheld XRF analyser. With its ultra rugged design, diverse field analysis is possible in any conditions.
The XRF delivers fast and precise identification and analysis of elements from phosphorus to uranium (P to U).
Advantages of Field Portable XRF.
In the past, studies relied exclusively on expensive and time consuming analysis based on samples that hopefully characterised the site. The portable XRF has revolutionised environmental investigations by allowing you on-the-spot elemental analysis, in real time. Measure the composition of soils, debris,
run-off streams, dust wipes, coatings, corings, paints, plastic and wood instantly,saving you time and money. From phosphorus to lead,
from low ppm to 100% - in soils, solids, liquids, powders, cores, fragments, filters & films, slurries and more. One simple test can analyse up to 25 separate elements in seconds, including priority pollutants. Determine zonal and contamination patterns; track pollutant migration caused by extreme weather; perform real-time surveys to delineate and define metals present.
In-situ soil analysis for rapid, comprehensive site investigations:
Delineate metals present and contamination patterns
Measure high volume field tests to minimise laboratory analytical costs
Test soil directly through plastic corings or bagged samples
Establish contamination boundaries and depth profiles for remediation and disposal
Collection of samples to produce rock-solid analytical data at the site:
XRF is non-destructive submit same sample for laboratory confirmation
Ensure validation requirements/targets are met on-site in real time
Prepared soil sample testing assures the maximum possible accuracy
Ultimate XRF Performance with
Silicon Drift Detector (SDD) Technology
The Innov-X Omega Xpress and Omega Xpress Vacuum
Alloy Analyzers utilize the latest in detector technology - an innovative, large area Silicon Drift Detector (SDD), commonly used and tested extensively in high end, laboratory based instrumentation. In comparison to a traditional
Si PiN Diode detector, the SDD provides:
10x improvement in signal to background ratio
Marked resolution improvement, from 195eV to 165eV
The capacity to handle 10x more counts
Key benefts to the user:
>3x improvement in reading speed.
Light element (Mg, Al, Si, P, S) analysis in air
3x better limits of detection for sensitive tramp elements
1683 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Benefits
Environmental studies can now save time and money with real-time, on-the spot elemental analysis - from Magnesium to Uranium,
From PPM to 100 % - in solids, liquids, powders, cores, fragments, filters and films, slurries and more. Portable XRF provides cost-effective, timely analysis.
Innov-X combined an x-ray tube source, multiple beam filtering and the HP PDA to deliver superior limits of detection, speed, precision and upgrade capability.
Features
Superior performance of Cr and other metals. Light element Analysis Program (LEAP) analyzes P, S, Cl, K and Ca
Utilizes advanced and universal XRF data modeling:
Compton Normalization: "Internal Standard" provides for quantitative analysis without site-specific calibrations
Fundamental Parameters: Standardless, ideal for samples with high and low concentration of several elements
Empirical Calibrations: "Calibration Curves" allows user-generated calibration curves
Add new elements and calibrations easily. Innov-X analyzers will meet your requirements today and in the future
View spectra on screen
Compare spectra for comparative analysis and display results versus standards
Stored tests can be re-run with new parameters or models
Data security: stores in binary format for data intel
The S1 TITAN is among the lightest (1.5 kg, including battery) tube-based handheld XRF analyzers on the market today. Fast analysis speed and exceptional accuracy are two key attributes that help define the S1 TITAN.
Other innovative features include an integrated touch-screen color display, 50 kV X-ray tube, SMART GradeTM timing, SharpBeamTM optimized X-ray geometry, Silicon Drift Detector (SDD), and an extremely tough housing that is sealed against humid and dusty environments. Contact our sales team today to learn more about the innovative S1 TITAN!
The S1 TITAN series is available in four (4) configurations: models 800, 600, 500 and 200. All models use Brukerâ??s SharpBeamTM technology. The S1 TITAN 800 and 600 use a FAST SDD detector to give you incredibly fast analysis times. The S1 TITAN 500 is configured with a fast, accurate, and affordable standard SDD detector. The S1 TITAN 200 is configured with an economical Si-PIN detector. In addition, the S1 TITAN can be configured with calibrations that are optimized for a variety of sample materials- including a wide range of alloys, various mining & environmental samples, as well as restricted materials.
SharpBeamTM technology
The S1 TITANs patent pending SharpBeamTM technology optimizes the detector and tube geometry. The optimized geometry has many desirable effects, including:
Reduces power requirements
Reduces weight
Improves measurement precision
Improved detection limits
Increases battery life
S1 TITAN Technical Details
NEW! pXRF Specification comparison (PDF)
Calibration range (depending on specific calibration):
S1 TITAN 800: 37 elements, including light elements Mg, Al & Si
S1 TITAN 600: 37 elements, including light elements Mg, Al & Si
S1 TITAN 500: 32 elements
S1 TITAN 200: 32 elements
Weight: 1.5 kg (3.3 lbs) with battery
Size: 25 cm x 28 cm x 9 cm (10 in x 11 in x 3.7 in)
Sample temperature:
S1 TITAN 800: Default to 150 C with Ultralen window. Up to 500C with Kapto window and hot surface adapter.
S1 TITAN 600: Default to 150 C with Ultralene window. Up to 500C with Kapton window and hot surface adapter.
S1 TITAN 500: up to 500C
S1 TITAN 200: up to 500C
TITAN Detector ShieldTM:
Included on all S1 TITAN models
Integrated camera:
S1 TITAN 800: Included
S1 TITAN 600: Optional
S1 TITAN 500: Not available
S1 TITAN 200: Not available
Detector:
S1 TITAN 800: FAST SDD�®
S1 TITAN 600: FAST SDD�®
S1 TITAN 500: Standard SDD
S1 TITAN 200: Si-PIN
Collimator options:
S1 TITAN 800: 5mm standard. Optional 8mm or 3mm
S1 TITAN 600: 5mm
S1 TITAN 500: 5mm
S1 TITAN 200: 5mm
X-ray tube: Rh target; max voltage 50 kV
Filter changer:
S1 TITAN 800: Five position motorized filter changer
S1 TITAN 600: Five position motorized filter changer
S1 TITAN 500: Fixed filter
S1 TITAN 200: Fixed filter
A co-product of biodiesel production that has a high heat value, FM is useful for industrial purposes. Often mixed with other bio-materials as a cost effective and cleaner alternative to traditional petroleum-based boiler fuels.
Rubber Carbon Black or often simply called Carbon Black is the result of combustion from the pryolysis process in the form of very fine powdered charcoal with a very large surface area and consisting only of carbon atoms. Rubber Carbon Black is also one of the most stable chemicals.
Carbon Black is most widely used as a mixture formula for tire components to increase strength and flexibility. Apart from that, it is also used as black pigment in tires, plastic, rubber, paint, toner, laser printers, photocopiers, shoe soles, electrical cables, car carpets, pipes, plastic films, asphalt, automotive parts, etc.
