Features for the Wacker Neuson RTLx-SC3 Trench Roller
The RT trench roller with the SC3 infrared-remote control offers proven compaction results with safer operation. The smart control uses an infrared signal with line-of-sight control. The articulated trench roller with padfoot drums offers below the axle exciter in each drum to allow for the efficient transfer of compaction energy to the soil for superior compaction results. The compaction of excavations and sub bases of foundations, roads and parking lots is the RT's specialty.
Articulated joint increases maneuverability.
Below the axle exciter in each drum improves compaction.
Low center of gravity improves stability.
High and low compaction force.
Flexible drum allows convenient conversion of drum width to fit job needs..
Maintenance-free lower end.
Engine control module with diagnostic LEDs.
Remote Control
Infrared technology requires operator to maintain line-of-sight.
Patented three receiving eye design provides uninterrupted operation.
Machine stops moving and vibrating if line of sight is lost or operator comes within one meter of roller's receiving eyes.
16-channel transmission allows multiple rollers to be operated on job without interference.
Item Condition : NEW
Gear Ratio : 1:2.50
Ball/Roller Bearing : 10
weight : 208oz/5900g
Line Capacity : PE 10(100LB)-2000m, 12(120LB)-1600m, 15(150LB)-1200m, 20(200LB)-1000m, 30(300LB)-700m,
Motor UP-Winding Speed : 115m/min
MAX Drag : 40-110kg
Max Rewind Power : 115kg
DC : 24V
Kohler 26 HP Engine: Big Power, air cooled, EFI (electronic fuel injection.
Velocity Plus Cutter Decks: The envy of the industry, Velocity Plusâ?¢ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scagâ??s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
Ogura PTO Clutch Brake: The Ogura GT3.5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 250 ft. lb. of holding strength, and an adjustable air gap for long life.
Tiger Eye Advanced Monitoring System: Depending on the mower model and engine selection, the Tiger Eyeâ?¢ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operatorâ??s seat.
Comfort Suspension Seat: Torsion-spring suspension seat adjusts to each operatorâ??s weight to provide superior comfort. Seat features full padding, forward/rearward adjustment, a high back, adjustable armrests and an adjustable back angle. The 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
GENERAL Total Fuel Capacity 9.5 gallons
Drive Tires 24" x 12"-12" (61")
Caster Tires 13" x 6.5"-6", flat-free
Seat 4-point iso-mounted mid-back mounted on operator-suspension platform
DRIVE SYSTEM Drive System Type Dual Pump and Motor
Pumps Hydro-Gear 12 cc
Motors Parker 14.5 ci
Forward Ground Speed 12 mph
Reverse Ground Speed 5 mph
Parking Brake Foot-operated pedal
DECK Cutting Widths 61"
Type Velocity Plus&trade
Cutting Height 1" to 5" in .25" increments
Deck Lift Adjustable foot-operated pedal
Construction Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles.
Spindles Cast-iron housing with tapered roller bearings.
Blade Engagement Ogura GT3.5 (250 ft lb)
8 Roller Skates Suppliers
Short on time? Let Roller Skates sellers contact you.
Ergonomic control panel
The ergonomic control panel places everything conveniently at your fingertips.
Removable foot plate
The unique tube style chassis features a removable foot pan for easy access to the top of the cutting deck.
Anti-slip foot area
The footrest area incorporates generous non-slip surfaces for safe and comfortable use.
Bumper
The integrated front guard/ bumper offers bold styling while protecting the nose of the unit. An optional bright LED headlight kit can easily be added, providing improved visibility in dark conditions.
Refinement
Rubber bellows offer a refined look and prevent debris and moisture from entering the control system.
Comfortable Seat
The thick padded seat and soft outer cover offers superior support and comfort, while the open back gives added ventilation.
Specifications
Capacity
Speed forward max: 6.5 mph
Speed forward min: 0 mph
Cutting deck
Cutting width: 54in
Cutting deck type: ClearCutâ?¢ - Fabricated
Cutting methods: Collect/Mulch/Side discharge
Cutting deck material: Steel
Deck thickness: 10 gauge
Cutting height steps: 6
Blade engagement: Electric clutch
Clutch rating: 87 ft.lb
Blades: 3 pcs
Anti-scalp wheels: 6
Nose roller: No
Deck lifting system: Manual, hand operated
Powder-coated cutting deck: Yes
Spindle/mandrel type: Cast iron
Greaseable mandrels: Yes
Deck Wash Port: Yes
Cutting height, min-max: 1.5-4 in
Dimensions
Base machine, length: 75 in
Base machine, height: 40 in
Base machine, width (chute down): 67 in
Base machine, width (chute up): 56 in
Weight: 595 lbs.
Tire size, front Width: 5 in
Tire size, front Diameter: 11 in
Tire size, front Diameter wheel: 6 in
Drive System
Transmission type: Hydrostatic
Transmission manufacturer: Hydro-Gear
Transmission manufacturer: Hydro-Gear
Pump displacement: 10 cm�³
Fan-cooled pumps: Yes
Engine
Motor/engine manufacturer: Kawasaki
Engine name: FR Series
Power output: 24 hp
Cylinder displacement: 726 cm�³
Cylinders: 2
Engine cooling: Air
Air filter type: Auto-type Paper
Power/fuel type: Gasoline
Engine lubrication type: Full pressure with oil filter
Oil filter: Yes
Fuel tank volume (with reserve): 3.5 gal (US)
Fuel tank location: Side (Single)
Equipment
Seat material: Vinyl
Seat spring: Yes
Seat back height: High
Hour meter type: Digital with pre-programmed service intervals
