Item Quality standard
Si 0.2-0.6%
Fe 0.35%
Cu 0.1%
Mn 0.1%
Mg 0.45-0.9%
Cr 0.1%
Zn 0.1%
Applications:
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste, etc
Specifications:
Clean Grade A (99.9% to 99.99%) scrap copper wire.
The copper wire consists of clean (free of any insulation), untinned, uncoated, unalloyed copper wire, free of hair wire, brittle burnt wire, and excessive oils minimum.
Waste identification code B1010 - Basel Convention, Annex IX
Chemical analysis: Copper content of 99.9% - 99.99% remelt recovery rate.
Technical Specifications:
Quality Cooper (Cu) 99.97% purity, minimum
B (%) < 0.05
Tensile Strenght > 205 RM (N/mm2)
Yield Strenght < 10%
Cleanliness (g/m2) < 0.025
Wire diameter 0.15mm; 0.25mm; 0.50mm. or more, < 5mm.
Excluding Ag & Oxygen
Chemical Composition:
Element: (%)
Copper 99.90% min
Lead: 0.005% Max
Bismuth: 0.03% Max
Carbon: 0.03% Max
Iron: 0.005% Max
Zinc: 0.003%
Cobalt: <0.001%
Phosphorus: <0.01%
Sulphur: <0.01%
Total impurities: 0.03% Max
Excluding Ag & Oxygen
Standard confirming to: (11000(ETP) content 99.90%)
