A pipe short nipple is a short length of pipe with threaded ends It is used to connect two pipes or to extend a pipe
Description
A pipe short nipple is a cylindrical tube with threaded ends The length of the nipple is typically less than 12 inches The diameter of the nipple is typically the same as the diameter of the pipes that it is connecting
Technical Specifications
The following are some of the technical specifications of a pipe short nipple
1 Size 18 Inch to 4 Inch Customized Up to 12
2 Material Carbon steel Alloy Steel Stainless steel Duplex
3 Thread NPT BSP BSPT
Applications
Pipe short nipples are used in a variety of applications including
A Connecting two pipes
B Extending a pipe
C Tapping into a pipe
D Mounting valves and fittings
E Repairing leaks
Safety Precautions
When working with pipe short nipples it is important to take the following safety precautions
a Use the correct size and type of nipple for the application
b Do not overtighten the nipples
c Use thread sealant to prevent leaks
d Be aware of the pressure and temperature ratings of the nipples
A pipe long nipple is a short length of pipe with threaded ends that is used to connect two pipes or fittings. Pipe long nipples are available in a variety of sizes and thread types to fit different applications.
Technical Specifications
1. Size: 1/8 Inch to 4 Inch Customized Up to 12â??
2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex
3. Thread: NPT, BSP, BSPT
Applications
Pipe long nipples are used in a variety of applications, including:
a. Connecting two pipes
b. Extending a pipe run
c. Tapping into a pipe
d. Repairing a leaking pipe
e. Adding a fitting to a pipe
Safety Precautions
When working with pipe long nipples, it is important to take the following safety precautions:
A. Use the correct size and type of nipple for the application.
B. Make sure the nipple is properly threaded and tightened.
C. Do not overtighten the nipple, as this could damage the threads.
D. Use gloves and eye protection when working with pipe long nipples.
A bull plug is a solid plug used as an isolation device in piping systems, conduits or wellbore tubulars. It is a short part with one threaded end and one rounded closed end. The threaded end is used to connect the bull plug to the pipe or conduit, and the closed end provides a barrier to fluids or gases.
The technical specifications of a bull plug will vary depending on the material, size, and thread type. However, some common specifications include:
1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile
2. Size: 1/4 inch to 8 inches
3. Schedule: STD, XS, 160, XXS
4. Thread type: NPT, BSP, BSPT
5. Pressure rating: 100 psi to 20,000 psi
Bull plugs are used in a variety of applications, including:
A. Blocking off pipelines or conduits
B. Isolating sections of piping for maintenance or repair
C. Preventing the flow of fluids or gases
D. Protecting equipment from contamination
They are also used in oil and gas drilling operations to plug off the bottom end of down-hole logging instruments from borehole fluids.
Here are some of the advantages of using bull plugs:
a. They are simple and easy to install.
b. They are available in a variety of sizes and materials to meet the needs of different applications.
c. They are relatively inexpensive.
d. They can be used to isolate a variety of fluids and gases.
Overall, bull plugs are a versatile and effective way to isolate fluids and gases in piping systems, conduits, and wellbore tubulars. They are simple to install and available in a variety of sizes and materials to meet the needs of different applications.
A swage nipple concentric is a type of pipe fitting that is used to connect two pipes of the same diameter. It is made of a single piece of metal that is swaged, or expanded, to fit tightly around the pipes. The swage nipple is then inserted into the pipes and secured with a nut.
The technical specifications of a swage nipple concentric vary depending on the size and material of the fitting. However, some common specifications include:
1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile
2. Size: 1/4 inch to 8 inches
3. Schedule: STD, XS, 160, XXS
4. Thread type: NPT, BSP, BSPT
5. Pressure rating: 100 psi to 20,000 psi
Swage nipples concentric are commonly used in a variety of applications, including:
A. Plumbing
B. HVAC
C. Fire sprinkler systems
D. Pressure vessels
E. Industrial piping
They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions.
Here are some additional features and benefits of swage nipple concentrics:
a. They are easy to install and remove.
b. They provide a secure and leak-free connection.
c. They are resistant to corrosion and rust.
d. They are available in a variety of sizes and materials to meet the needs of different applications.
A swage nipple eccentric is a type of pipe fitting that is used to connect two pipes at an angle. The fitting has an eccentric bore, which means that the center of the bore is offset from the center of the fitting. This allows the fitting to be aligned with the two pipes at an angle.
The technical specifications of a swage nipple eccentric vary depending on the size and material of the fitting. However, some common specifications include:
1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile
2. Size: 1/4 inch to 8 inches
3. Schedule: STD, XS, 160, XXS
4. Thread type: NPT, BSP, BSPT
5. Pressure rating: 100 psi to 20,000 psi
Swage nipples eccentric are commonly used in a variety of applications, including:
A. Plumbing
B. HVAC
C. Fire sprinkler systems
D. Pressure vessels
E. Industrial piping
They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions.
Here are some additional features and benefits of swage nipple eccentric:
a. They are easy to install and remove.
b. They provide a secure and leak-free connection.
c. They are resistant to corrosion and rust.
d. They are available in a variety of sizes and materials to meet the needs of different applications.
Minimum Order Quantity: 6000 Piece
Fitting Type: MTA THREAD
Nominal Size: 15MM-50MM
Country of Origin: Made in India
Application :COLD AND HOT WATER
Size:1/2",3/4",1",1.1/4",1.1/2",2",2.1/2",3",4"
REDUCER:3/4" X 1/2"
Material: CPVC
Connection: MALE
CPVC THREAD MTA FOR HOT AND COLD WATER
Fitting Type: FTA
Size: 3/4 inch
Material Grade: CPVC
Color: Off White
Application :COLD AND HOT WATER
Size: 1/2",3/4",1",1.1/4",1.1/2",2"
REDUCER:3/4" X 1/2"
Connection: FEMALE
CPVC FTA THREAD FOR HOT AND COLD WATER
