Our pressure relief safety valve is designed as a pop up type valve. On exceeding set pressure the valve opens to discharge the excess built up pressure.
After relieving excess pressure, the valve automatically returns to the original position. The bronze internals (Seat & Plug) ensure that there is no leakage while in operation.
By replacing only the spring it is possible to change set pressure range.
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB, 50 NB
End Connections : Screwed BSP
IBR Certificate : Available For IBR Applications
Soft-Seating : Also Available For Air Application
Maximum Operating Temperature : 235° C
Available Range : Min. Blow Off Pressure 0.35 Kg/Cm2 Max. Blow Off Pressure 17.5 Kg / Cm2
Three way valve which design for diverting or mixing service applications. A diverting service valve takes common stream and splits it into two outlet force, this configuration is used for applications such as level control and pump bypass control valve.
Mixing service valve combines two fluid streams and discharges the mixed fluid to a common outlet ports this configuration is used for applications where two fluids need to be mixed the end result can range from temperature control to producing a new fluid.
Three way valve actually performs of two opposite acting standard two way valves. So that use of one valve instead of two is very economical.
Valves are available with hand wheel if required.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A217 Gr WC6) / SS (CF 8M)
Leakage Class : ANSI B 16.104 CL IV
Range Ability : 40 : 1
- This is a IBR approved in line FLOW CHECK VALVES for use in any application Water, Condensate, Liquid etc.
- Ensure that there is no reverse flow in the line.
- Maximum pressure 47.5 kg/cm2 at 105°c.
- Material ASTM A 315 Gr. CF8M (SS 316).
- Easy installation, fits between flanges joint in any class.
- Sizes available 15 NB to 100 NB, large size available on request.
- Valve must be fitted with the direction of flow being according to the direction arrow indicated on the body of the valve.
PRDS Valves ( Combined Pressure Reducing Cum Desuperheating Valves )
Features :
Our combine PRDS valve is a single seated globe type valve that combines pressure & temperature reduction in one compact solution. The high pressure, high temperature steam which enters the main branch, is reduced in pressure and then spray water is injected immediately after pressure reduction.
The high velocity and turbulent flow conditions data present immediately following the pressure reduction allow for rapid atomization and absorption of the spray water thus effectively desuperheating the steam.
Reduction of noise level due to mist formation by water is an added advantage.
Size : 15 NB to 300 NB
Rating : IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request.
Body Materials : Carbon Steel (A216 Gr WCB) / Alloy Steel (A21? Gr WC6) / 55 (CF 8M)
Leakage Class : ANSI B 16.104 CL IV
Range Ability : 40 : 1
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800
Options : IBR OR Non - IBR.
Material : Forged Steel Body With SS Internals
End Connections : Screwed BSPT
Socket Weld
Butt Weld
Max. Temperature : 427o C
Max. Pressure 139 kg / cm2
Sizes Available : 15 NB, 20 NB, 25 NB, 40 NB & 50 NB. Class 800
Options : IBR OR Non - IBR.
Material : Forged Steel Body With SS Internals
End Connections : Screwed BSPT
Socket Weld
Butt Weld
Max. Temperature : 427o C
Max. Pressure 139 kg / cm2
We are organization engaged in supplying and exporting industrial pipes with best in class quality. We are a leading name, which is engaged in offering a comprehensive range of Stainless Steel, Carbon Steel & Alloy Steel Product. The offered range is manufactured utilizing superior grade raw material such as stainless steel and allied, procured from reliable vendors of the market. In addition to this, the offered range is tested on different parameters to ensure its tandem with the highest quality norms and standards. We provide different ranges like round, square, Welded, Seamless etc.
THE SALIENT FEATURES ARE AS FOLLOWS :
- Excellent mechanical & magnetic properties
- High thermal & electrical conductivity
- Low gas content & vapor- pressure
- Value Added Services
- Hot Dipped Galvanizing
- Epoxy & Fbe Coating
- Electro Polish
- Draw & Expansion
We have in store for our clients a wide range of Stainless Steel, Duplex Steel, Alloy Steel Rods that are highly appreciated in the market for their sturdiness and high quality. These are made using high grade materials and are provided to our client in a variety of lengths and width parameters as per their requirements. We also take bulk orders for our clients and ensure its timely delivery and make sure that the client does not face any delays with orders. These steel round bars are available to our clients at leading industry prices.
STANDARDS SIZE
Bright Bars: From 5mm Dia up to 350mm Dia
Black Bars: From 16mm Dia up to 350mm Dia
Square Bars: From 5mm Dia up to 250mm Dia
Hex Bars: From 5mm Dia up to 150mm Dia
Wires: 0.1mm Dia to 5mm Dia
Welding Electrodes: 2.6mm to 4mm Dia
Condition: Rolled, Forged, Annealed, Picked, Hot Rolled, Cold Roll
Our organization is involved in exporting, trading and supplying an extensive range of Stainless Steel, Nickel Alloys, Carbon Steel, Alloy Steel, Other Ferrous and Non-Ferrous Metals to our clients. Used in various industrial applications, these plates are manufactured by the experienced professionals from high-quality raw material and advanced technology.
STANDARD MATERIALS
Stainless Steel, Nickel Alloys, Carbon Steel, Alloy Steel, Other Ferrous and Non-Ferrous Metals.
STANDARDS FOR SHEETS
Thickness: 0.25 mm and above
Width: 6 mm to 2000 mm
Length:1000 to 3000 mm
STANDARDS FOR PLATES
THICKNESS:3.00 mm and above
WIDTH:1000 mm to 3200 mm
LENGTH : 2438mm/3048mm/6069mm to13500mm
We are engaged in exporting and supplying a very highly premium quality range of Stainless Steel, Carbon Steel, Alloy Steel Fastners. The company has carved an unparalleled position in the industry by making relentless efforts to cater to the clients with premium quality pipes, tubes and fitting components.
TYPES:
Bolts, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolts, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts , T- Head Bolts , Wing Screw , Eye Bolt , Eye Bolt, Foundation Bolts and Structural Bolts.
