Forced convection digitally controlled hot air ovens suitable for precise heating drying and various other laboratory drying applications requiring controlled heating zone
Features
Forced convection system ensures good mixing strong dispersion and maintains higher temperature uniformity inside the chamber
Most ideal for various experiments in microbiology cell cultivation of animals and plants and food for various laboratories industries R D labs etc
Synthetic door gasket made of neoprene on the doublewalled door
Useroriented design of shelves makes you adjust each space of shelves without difficulty
Adjustable two ventilation slides control inner airvapor circulation
Beaded heating elements are placed in ribs at bottom and sides for uniform heat distribution
Constructional Features
Outer body made of CRC Sheet duly powder coated
Inner chamber and adjustable trays are made of Stainless Steel SS304 grade
Gap between the inner chamber and the outer wall is filled with highgrade mineral wool for minimal heat dissipation
Bigger sized units mounted on caster wheels for easy portability
Door fitted with heavyduty hinges and door handle ensuring there are no leakages through the door gasket
Temperature Range 50C to 250C
Temperature Accuracy 1C
Temp Controller Microprocessor Based Digital Temperature IndicatorCumController with LED OR LCD Display OR TFT Touch Screen Display Controller Option
Type Available with forced convection system
Regulator Solidstate electronic relay with protective heat sink
Safety Device Overtemperature limiter switch prevents overheating
To work on 220230V AV 5060 Hz supply
General Purpose Laboratory Centrifuge Machine, Max. speed 5200 r.p.m.
Heavy-duty C.R.C construction finished with power coating.
Double-walled ABS injection moulded lid which is light weight to avoid accident.
Inter lid lock and metallic centrifuge bowl for safety 2 lines of 16 character LCD display of RPM set time and run time
Microprocessor based programmable speed control from 500 to 5200 RPM of rotor and digital timer (1-99 minutes)
Last test parameter recall and display automatically on LCD.
Low noise, smooth and soft start and stable speed output
Wide variety of rotors and reduction adapters available on demand at extra cost.
Laboratory stirrer is a laboratory equipment used for mixing and stirring liquids and solutions. It is designed to provide a consistent and uniform mixing of substances in a laboratory setting. The stirrer is made up of a motor, a shaft, and a mixing blade. The motor provides the power to rotate the shaft, which in turn rotates the mixing blade. The mixing blade is designed to create a vortex in the liquid, which helps to mix the substance thoroughly.
The motor stirrer having maximum speed upto 4000 r.p.m. unit is clamped to a C.P. rod fitted� on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed Motor with speed regulator is fitted with S.S. Stirrer rod to give smooth and noiseless operation. With 1/20 H.P. Universal Motor
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
539 Laboratory Reagents Suppliers
Short on time? Let Laboratory Reagents sellers contact you.
These Narrow Mouth Regent Bottles are available in polypropylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. The polypropylene Cap has a built in seal ring to make these bottles leakproof.
Product Information:
These wide mouth reagent bottles are available in polypropylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. The polypropylene cap has a built in seal ring to make these bottles leekproof.
Product Information:
Modular fully loaded chemical fumes extraction hoods after excellent performance and high suction power. Excellent chemical resistance & international quality electrical & gas connection utilities.
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
SALIENT FEATURES & CONSTRUCTION OF FUME HOOD
Low Cost.
Low Noise.
User Friendly Ergonomic Design.
Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
Basic material is thick board wood front back top and exterior surfaces are covered with Cold rolled steel duly powder coated
All interior surfaces are sealed and checked for leakage.
Work table is made of High Quality Granite and is fitted with a small S.S. sink with water tap connections.
Working area is illuminated by fluroescent lighting fitted to the unit.
The front door moves vertically up and down with concealed counter balanced weight.
The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
Height of the working table provides comfortable "SIT DOWN" working position for the operator.
The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab
SALIENT FEATURES & CONSTRUCTION OF FUME HOOD
Low Cost.
Low Noise..
User Friendly Ergonomic Design.
Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
Basic material is thick board wood front back top and exterior surfaces are covered with Cold rolled steel duly powder coated
All interior surfaces are sealed and checked for leakage.
Work table is made of High Quality Granite and is fitted with a small S.S. sink with water tap connections.
Working area is illuminated by fluroescent lighting fitted to the unit.
The front door moves vertically up and down with concealed counter balanced weight.
The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
Height of the working table provides comfortable "SIT DOWN" working position for the operator.
The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.
These polypropylene funnels are best suited for transferring powdered reagents. The unique feature of these funnels is its parallel stem that minimizes bridging of powder. These funnels are steam autoclavable at 121�°C.
Product Information:
Made of polypropylene, these Stirrers are very useful for stirring different solutions in the laboratory. These Stirrers prove to be tough and long lasting.
Product Information
These Storage Boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in three different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service
Product Information:
This autoclavable bottle, made of polypropylene, & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The built in depressions on two sides provide excellent grip while holding this bottle.
A Mini Centrifuge Machine is a compact and versatile laboratory device designed for the rapid separation of small liquid samples. It employs centrifugal force to spin microtubes or small containers, effectively separating liquids from solids, such as cells or precipitates. These machines are commonly used in molecular biology, biochemistry, and clinical laboratories for tasks like DNA extraction, cell pelleting, and quick sample preparation, offering a convenient and space-saving solution for various research applications.
Key Features :
Micro processor controlled, Micro-Centrifuge machine (Mini Centrifuge)
Speed range from 1000 to 10000 r.p.m. in step of 1000.
Fitted with high quality motor with carbon brushes.
Complete body made of ABS plastic injection moulded.
Quiet & reliable
Small foot print
Built in power supply
High quality motors
Polycarbonate transparent cover
Supply completed with 2 standard rotors as under :
(i) Angle Rotor 6 micro centrifuge of 1.5ml capacity
(ii) Angle rotor 12 micro centrifuge tubes of 0.5ml capacity
Forced convection digitally controlled hot air ovens suitable for precise heating drying and various other laboratory drying applications requiring controlled heating zone.
Features
Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber.
Most ideal for various experiments in microbiology, cell cultivation of animals and plants and food for various laboratories, industries, R & D labs, etc.
Synthetic door gasket made of neoprene on the double-walled door.
User-oriented design of shelves makes you adjust each space of shelves without difficulty.
Adjustable two ventilation slides control inner air/vapor circulation.
Beaded heating elements are placed in ribs, at bottom and sides for uniform heat distribution.
Constructional Features
Outer body made of CRC Sheet duly powder coated
Inner chamber and adjustable trays are made of Stainless Steel (SS-304 grade).
Gap between the inner chamber and the outer wall is filled with high-grade mineral wool for minimal heat dissipation.
Bigger sized units mounted on caster wheels for easy portability.
Door fitted with heavy-duty hinges and door handle ensuring there are no leakages through the door gasket.
Temperature Range: 50Ã??C to 250Ã??C
Temperature Accuracy: �±1�?C
Temp. Controller: Microprocessor Based Digital Temperature Indicator-Cum-Controller with LED OR LCD Display OR TFT Touch Screen Display Controller (Option)
Type: Available with forced convection system
Regulator: Solid-state electronic relay with protective heat sink
Safety Device: Over-temperature limiter switch prevents overheating
To work on 220/230V AV, 50/60 Hz supply
A Mini Centrifuge Machine is a compact and versatile laboratory device designed for the rapid separation of small liquid samples. It employs centrifugal force to spin microtubes or small containers, effectively separating liquids from solids, such as cells or precipitates. These machines are commonly used in molecular biology, biochemistry, and clinical laboratories for tasks like DNA extraction, cell pelleting, and quick sample preparation, offering a convenient and space-saving solution for various research applications.
Key Features :
Micro processor controlled, Micro-Centrifuge machine (Mini Centrifuge)
Speed range from 1000 to 10000 r.p.m. in step of 1000.
Fitted with high quality motor with carbon brushes.
Complete body made of ABS plastic injection moulded.
Quiet & reliable
Small foot print
Built in power supply
High quality motors
Polycarbonate transparent cover
Supply completed with 2 standard rotors as under :
(i) Angle Rotor 6 micro centrifuge of 1.5ml capacity
(ii) Angle rotor 12 micro centrifuge tubes of 0.5ml capacity
539 Laboratory Reagents Suppliers
Short on time? Let Laboratory Reagents sellers contact you.
