All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Silicone Heating Plates beneficial to take out liquid and coagulum from drums easily by heating, such as adhesive, oil, asphalt, paint, paraffin wax, oil and various resin raw materials in the drum. It can make viscosity of materials descending and uniform by heating the drum, and reduce the power of pump. Therefore, the heater does not be restricted by seasons, and can be used throughout the year.
The heating element is a Nickel-Chromium or Copper-Nickel alloy wire, this resistance is embedded between two layers of silicone impregnated glass cloth, making drum heater. A fitted stainless steel spring makes the mounting easy.
A dial thermostat graduated from 30°C to 150°C allows the temperature maintenance adjustment. Or digital thermostat 0--280 degree C can adjust and display temperature as your need.The drum heater is weatherproof.
Design Features
1. High temperatures resistance
2. Unheated straight section
3. Precise temperature control 4. Fast response
5. Choice of lead orientation 6. Choice of lead protection
6. Longer heat lifetime 8. Round, square and rectangular cable
7. High watt densities 10. Rugged, durable construction
8. Available with built-in thermocouple
FSF panel radiators are ceramic infrared radiators with a low overall height. They are produced using a full-pour casting ceramic process and are designed for operating temperatures up to 720 C and surface ratings up to 64 kW/m².
Compared to other LaiYuan panel radiators, which have the standard socket, the overall height of the FSF radiators, measured from the radiation surface up to the mounting plate, has been reduced by approximately 45 %.
FSF series radiators can be used universally. The low overall height of the radiators enables space-saving installation, for example, which may be required to retrofit machines.
FSF radiators are available in four designs and cover the power range from 60 W to 1500 W. They have the customary market dimensions and can there- fore be replaced with radiators with corresponding properties if the requirements change.
Product Feature
The power can be customized;
The medium is heated by electric energy through the energy conversion form of "transfer to + convection", with a thermal efficiency of 99%;
The explosion-proof structure can work normally in the explosive gas dangerous places of Zone II;
The structure is safe and reliable, and can be designed according to process requirements;
Green and environmental protection, in line with national policies;
Interlocking control of temperature, pressure, flow, etc. can be realized through the automatic control system;
High temperature tracking response progress, fast response, significant energy saving;
With electric heating element overheating protection function to prevent the electric heating element from being damaged due to flow interruption and accidents;
The internal structure of the heater is designed according to the thermodynamic structure, without heating dead angle;
Application
Oil heating (lube oil, fuel oil, thermal oil)
Water heating (industrial heating systems)
Heating of process gases and industrial gases)
Natural gas, seal gas, fuel gas heating
Air heating (pressurized air, burner air, drying technology)
Environmental technology (exhaust air cleaning, catalytic after burning)
Steam generator, steam super heater (industrial process technology)
Ceramic Band Heaters provide long life and use less wattage (because of insulation) in plastics extrusion and injection molding applications. These band heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire.
Stainless Steel mica band heater was made of stainless steel sheet, mica sheet, resistance wire/ strip , stainless steel sheet standard thickness is 0.3mm to 0.5mm, and in the middle , resistance wire/ strip wrap around the mica sheet, and add 1-2 pieces mica sheet again each side for insulation. They can be made to be many different kinds of shape as your requirement.
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Stainless Steel mica band heater was made of stainless steel sheet, mica sheet, resistance wire/ strip , stainless steel sheet standard thickness is 0.3mm to 0.5mm, and in the middle , resistance wire/ strip wrap around the mica sheet, and add 1-2 pieces mica sheet again each side for insulation. They can be made to be many different kinds of shape as your requirement.
It is the ideal solution for high watt densities and high operating temperature applications, especially for the plastics industry. Band heaters can be found in several types of dimensions, wattage, voltages and material. It is an inexpensive form of heating solution to external indirect heating.
Ceramic Band Heaters provide long life and use less wattage (because of insulation) in plastics extrusion and injection molding applications. These band heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire.
HYDK-Floor convector with fan (heating and cooling, fan coil):
This type of fan coils enjoy good heating and cooling performance, mainly used as office heater, shool heat of office space heaters,Short delivery times for our standard trenches.Cost-effective efficient heating and cooling at low noise levels.Add a condensation pump to drain condensation.Adjustable leveling bolt and filter screen.
Pls contact us for more information of the Floor Convectors.
