Item Name CT-7510 Green Cutting Fluid
Concentration Grinding process :3~5% Diluent Cutting process:5~10% Diluent
Life cycle 3~6 month
Package 200Lsteel drm or 18L Plastic bucket
Retention period
1 years
Product feature
1.It is composed of various synthetic rust inhibitors, lubricants and additives.
2.Good lubrication, cooling, cleaning, anti-rust performance, easy to clean.
3.Non-toxic, odor-free, non-irritating to the skin, no deterioration after long-term use.
4.Excellent rust resistance, providing online protection for machine tools and processed parts, long-term use will not corrode machine tool paint,
and will not cause discoloration.
5.Compared with the emulsion, the cooling performance is remarkable, and the liquid has a stable life.
The concentration can be adjusted according to the processing requirements
Preparation method
Dilute this product with clean tap water (higher requirements, it is recommended to use pure water), stir well and use
When using new fluid
First clean the liquid storage tank and machine tool table, install fixtures, iron filings and dirt, then use 1~2% of this product diluent, 0.3~0.5% sterilization cycle cleaning and discharge. Prepare the working fluid with the required concentration and use it after recycling
Bath supplement
When the tank liquid needs to be replenished, add the corresponding proportion of the original solution of the product while adding water to maintain the necessary concentration
CBN Wheel For Camshaft Grinding
Vitrified bond CBN Grinding Wheel is suitable for grinding the cam lobes of automobile camshafts.The wheel speed is 80m/s-160m/s,Designed to used on CNC Cam Grinders like Toyoda,Schaudt,Landis,Junker etc.
Alias: CBN Grinding Wheel,Camshaft Grinding Wheel
Application: grinding camshaft in automobile
e-mail: sales@moresuperhard.com
Details
Vitrified bond CBN Grinding Wheel is suitable for high-efficient heavy grinding of camshaft of automobile parts.The wheel speed is 80m/s-160m/s,Designed to used on CNC Cam Grinders like Toyoda,Schaudt,Landis,Junker etc.
The Features Of Vitrified CBN Grinding Wheels For Camshaft
Sharp cutting, high efficiency, long life, less heat and jam generated in grinding, easy control of the precision and easy dressing
Applicable Machines Of Vit CBN Grinding Wheel For Camshaft Grinding
LANDIS: LT1, LT2
SCHAUDT: CF41, CF61, ZEUSMX, ZX
NAXOS: NAXOS-UNION, P310*1250, Gf70
JUNKER: JUCAM5002/10, JUCAM500, JUCRANK5000,6000
TOYODA: GCS63, GL5P-63, GL6P-100, GCH120B, GC32M-63, GCH63B, GL63M-T
The Cases Of Vitrified CBN Grinding Wheel For Camshaft
*Â Vit CBN Grinding Wheel for Camshaft Grinding
Â
Model / Size D355xID152.4*T15 Vit CBN Grinding Wheel for Camshaft
Grain Size #80/100
Camshaft Grinding Machine PAlAMRY
Grinding Machine Speed 2500 r.p.m.
Workpiece Hardness HRC 55-60
Wheel speed (m/s) 50m/s
Camshaft Speed 0~30 r.p.m.
Grinding allowance 0.5mm-1mm
Cooling Liquid Oil-water mixture
*� Double Ends Vit CBN Wheel for Camshaft Grinding
Model/ Size 120*15*66*ï¼?21+17) Double ends vitrified bond CBN grinding wheel
Grinding Machine Applicable Grinding Machine Toyoda (JKTï¼?
Workpiece Workpiece Cam lobes of camshaft
Workpiece Material GCr15
Hardness of grinding layer HRC58-62
The grinding stones are used for grinding/polishing the copper layer of the gravure cylinder.
Features:
Coarse grinding stone and finishing grinding stone.
Grinding stones in addition to an outstanding cutting performance when achieving fine roughness values.
Our particular synthetic material has been developed especially for the stones mass in order to assist in the defined continuous removal of worn out abrasive particles.
Spring-mounted abrasive wheels guarantee an even grinding pattern without chatter marks, score marks or other irregularities.
Specifications:
OD: 200mm
ID: 100mm, 50mm
TH: 50mm, 100mm
Grade: #180, #280, #320, #400, #600, #800, #1000, #1500, #2000, #2500, #3000
Special specification can be customized as per customer's requirement.
pu wheels for skate board 80*44 PU Wheels custom logo pu pulley for skateboard
Product: PU wheels/pulley for skate board, 80*44mm, 78A, black, Customized
Why there are thousands of types of wheels?
The wheels have specific features of hardness, size, shape...and color, printing...
When choosing materials, it should be considered to be suitable for different ground roads, such as floor roads, cement roads, asphalt roads and so on. No matter what road you slide on, the wheel must be flexible, wear-resistant, and moderate in hardness. It must also ensure that the wheel has enough friction coefficient on the road surface.
The first is hardness, and the skateboard wheel is usually a polished polyurethane. The proportion of polyurethane in the wheel is different, and the hardness of the wheel is also different. A wheel with a hardness of 85A(A refers to hardness) is relatively soft and suitable for rough pavement taxiing. The sound is minimal when taxiing. It is a good choice for friends who like to go shopping. However, the 85A wheel is relatively non-wearable because it is soft, and it is easy to break the interval layer when doing things such as side skid brakes. In general, today's skaters use 97A-103A wheels. This kind of hardness wheel is suitable for smooth marble and relatively flat roads, as well as U pools, platforms and other props. Wheels such as 85A at smooth leveling are also soundless. But in rough places and on the U pool, there will be a huge rumble(this sound often makes the racer boil). The transparent or translucent wheel does not use 103A. It is too hard and will burst. It is best to use only props made of all WOOD materials.
Followed by the diameter, the 38-40 mm wheel is now used by very few people. This wheel starts and accelerates quickly, but the stamina is small, and it is only suitable for very flat roads. It is characterized by a fairly flexible movement. Friends who like small movements can try.
And the rebound, the rebound of the wheel is very important. Although there are no parameters to refer to. However, the stronger the rebound, the stronger the ability to overcome obstacles. If you don't know how well your wheels bounce back, you can do a little experiment. Remove the bearings in the wheel, you throw the wheel hard on the ground, rebound the high wheel, the wheel will bounce to the ceiling, the bottom rebound wheel, will only jump on the ground two times. On the smooth ground, perhaps, the two wheels can run as fast, but in the slightest rough road, the advantage of high-rebounding wheels can be immediately demonstrated.
Our main products are long board wheels, skateboard wheels, shock absorbers and skateboard accessories and some other products. And we also have a plastic injection plant to produce some skate board accessories, such as the core of pulley.
For more information, please click here.
pu wheels for skate board 83*44 customized pu pulley for skate board
Product: PU wheels/pulley for skate board, 83*44mm, 78A, yellow, Customized
Why there are thousands of types of wheels?
The wheels have specific features of hardness, size, shape...and color, printing...
Skateboards wheel, 4 units for one set, are made of polyurethane. Wheels have different diameters, shapes and hardness. Small wheels start fast, but lack of stamina, suitable for skills; large wheels can easily glide on less flat ground. Skateboards are also very particular. In addition to bearing accuracy (such as ABEC1, ABEC3, ABEC5, ABEC7, etc.) has an impact on speed, it depends on the performance of the wheel.
Good abrasion resistance, good bounce,
When choosing materials, it should be considered to be suitable for different ground roads, such as floor roads, cement roads, asphalt roads and so on. No matter what road you slide on, the wheel must be flexible, wear-resistant, and moderate in hardness. It must also ensure that the wheel has enough friction coefficient on the road surface.
Followed by the diameter, the 38-40 mm wheel is now used by very few people. This wheel starts and accelerates quickly, but the stamina is small, and it is only suitable for very flat roads. It is characterized by a fairly flexible movement. Friends who like small movements can try. The 45mm -50mm wheel is the most suitable wheel for the road type. 52-60mm wheels are more suitable for use on props. Because the action on the props requires strong power, the flat action hopes that the lighter the board is, and the weight on the props can sometimes bring more inertia and impact, making you taller and farther. In the wild, you can use more than 60mm of cross-country wheels. Professional mountain skateboards use large rubber wheels.
And the rebound, the rebound of the wheel is very important. Although there are no parameters to refer to. However, the stronger the rebound, the stronger the ability to overcome obstacles. If you don't know how well your wheels bounce back, you can do a little experiment. Remove the bearings in the wheel, you throw the wheel hard on the ground, rebound the high wheel, the wheel will bounce to the ceiling, the bottom rebound wheel, will only jump on the ground two times. On the smooth ground, perhaps, the two wheels can run as fast, but in the slightest rough road, the advantage of high-rebounding wheels can be immediately demonstrated.
Our main products are long board wheels, skateboard wheels, shock absorbers and skateboard accessories and some other products. And we also have a plastic injection plant to produce some skate board accessories, such as the core of pulley.
1029 Grinding Wheel Suppliers
Short on time? Let Grinding Wheel sellers contact you.
Description
CemMate 100 is a kind of grinding type cement grinding aid.
By the use of CemMate 100, without the new investment and change of existing cement grinding process equipment, it can be realized that:
- Mill output is increased;
- Energy cost is reduced.
Scope of the application
Suitable for grinding of any kinds of cement, slag powder, steel slag powder and limestone powder.
Property
Appearance
Brown liquid
Specific gravity
1.16±0.05
PH value
9±1
Insoluble matter
â?¤ 0.01%
CemMate 100 is non-toxic, non corrosive, non flammable, non explosive.
Technical characteristic
- Increasing mill output. This product can effectively remove the electrostatic agglomeration due to grinding, reduce the agglomeration between cement particles, and the agglomeration between particles and pound mills. The mill output can be increased by 10ï½?20%. For the grinding of slag powder or steel slag powder, the mill output can be increased by ï½?10%.
- Reducing energy consumption. The electricity used in the production of per ton of cement can be saved by 6ï½?10 kw/h.
- Others. There is no corrosive effect on grinding equipment and concrete reinforcement. Basically, it does not affect cement setting time and water consumption of standard consistency. Cement strength can be increased slightly. It has no adverse effect on the work performance, mechanical properties, deformation performance and durability of concrete.
Dosage
The dosage of CemMate 100 is related to the physical properties of materials to be grinded.
The recommended dosage is 300 grams / tons of materials to be grinded (0.03% of cement weight).
Usage method
In order to achieve the most stable using effect, CemMate 100 shall be accurately added by an adjustable liquid metering pump that matches the type and output of the mill. The liquid metering pump must be calibrated before use.
CemMate 100 can be added to the belt conveyor or the front of the mill.
Technical service
Professional engineers can combine the details of the cement plant to make experiment and recommend the mill parameters to the cement plant.
CemMate 100 is one kind of cement grinding aid. According to the condition and demand of cement plant, professional engineers can design the most suitable cement grinding aid for many kinds of cement from cement plants to adjust cement performance, such as: setting time, water requirement of normal consistency, fluidity, adaptability of cement concrete, etc.
Package
200 L/drum, intermediate bulk container.
Storage
CemMate 100 should be stored indoors or in the shade. Avoid freezing. If it is frozen, melt it slowly before use. After long term placement, it should be stirred or shaken before use. The validity period is one year.
We provide free sample for mini mill test and technical support throughout the whole application process.
We look forward to the cooperation with the agent worldwide.
It can process sesame, peanut , almond, chestnut, walnut and other nut which contain oil.
work 24 hours non stop
Low rotating speed,only 30-33 rpm/min, so the tahini is not hot,the sesame nutrition, taste and mineral can be kept well, s uch as protein, VE, calcium,phosphrous, iron etc will not be broken.
the capacity we have 5kg/h,10kg/h,20kg/h,30kg/h,50kg/h,100kg/h ,150kg/h and customized production line
Yy-ml-1-8
Grit:30/60/100
Used by:angle grinder /grinding machine
Application :concrete/stone etc
Advantage:long cutting life/sharp cutting speed/more stable/good heat dissipation with more holes
Types of cup wheelsitem codediameterborequantity of segmentsseg.Height
Tc typeyy-ml-1 13025.4/22.23/20107mm
13025.4/22.23/20107mm
13025.4/22.23/205+57mm
1.Application: Suitable for cutting stainless steel ,hard alloy, etc.
2.Machine:Used on portable angle grinder
3.Usage: Preparation work before welding, grinding weld, cleaning burr & rust, surface polishing, edge grinding, etc.
4.Advantage: High grinding efficiency, long service life, high cost performance, comfortable for operator.
1.Application:Suitable for cutting stainless steel ,hard alloy, etc.
2.Machine:Used onportable angle grinder
3.Usage:Preparation work before welding, grinding weld, cleaning burr & rust, surface polishing, edge grinding, etc.
4.Advantage:High grinding efficiency, long service life, high cost performance, comfortable for operator.
T41 Super Thin Cutting Wheels are suitable for cutting hollow-steel tube, high tensile sheets, thin iron plate, armour plate, round bar etc hard metal. These cutting wheels are also used for cutting stainless steel and all kinds of acid proof steels.
Size(mm) Inch Max. Speed Pcs/Ctn G.W.(kg)
T27 grinding wheels are used for polishing material such as steel pipe, armor plate and so on. The work-piece would not be rubified and its surface will become bright and smooth after polished. It is testified that� this product is safe and durable.
Size(mm) Inch Max. Speed Pcs/Ctn G.W.(kg)
100x6x16 80M/S 200 22
115x6x22 80M/S 100 14
125x6x22 80M/S 100 18
150x6x22 80M/S 100 24
180x6x22 80M/S 60 21
230x6x22 80M/S 50 27.5
Flexible abrasive wheels are used for steel, stainless steel, mild steel, construction steels, hardened steels, cast steel, grey cast iron, glass, marble, brass, aluminium, Also used for edge grinding, burring, cleaning of weld seams etc.
Because of its flexibility, flexible abrasive wheels improve the removal and generate a cool grinding and cutting.
T27 grinding wheels are used for polishing material such as steel pipe, armor plate and so on. The work-piece would not be rubified and its surface will become bright and smooth after polished. It is testified that  this product is safe and durable.
1029 Grinding Wheel Suppliers
Short on time? Let Grinding Wheel sellers contact you.
