Find Verified Gum Resin Suppliers, Manufacturers and Wholesalers

25kg package with 40 pieces on the pallet

Excellent FIREWOOD at 250mm cut in 15 kg bags, all cargo with less than 15% moisture coming from GUM & BLACK WATTLE wood

Setafloor 7200 1C is a semi-solid colored polyurethane floor paint of one component with excellent friction resistance for indoor use.This resin flooring paint is indicated as a 0.3mm floor paint on medium strength floors such as car garages , warehouses , exhibition grounds.
It has a coverage of 0.25-0.3 kg /m2 in two layers .

Magic Pox is a crystal clear epoxy coating and casting resin
Magic Pox is a crystal clear casting and coating epoxy system that cures to a rigid, Moisture resistant, shiny high
gloss of crafts and decorative applications
Magic Pox finishes used for:
Coating Casting
Clear coating and sealing artwork Casting jewelry including earrings
Photography Pendants
Plaques and frames Necklace ring & Rings
Paper collages Figurines
Tabletops Coasters
Ideal for Both Casting and Coating
Perfect for starter beginner and professional artist
Cures crystal clear
Moisture resistant
Environment friendly (odor free and no solvent)
Rigid and high gloss finish
Self-leveling
Exceptional clarity
Natural air bubble release without the need for degassing
Hard wearing and highly polishable!
Excellent impact strength

Mix ratio by weight : 100 A : 25 B
Color Water clear
Solids Content 100 %
Specific gravity 1.1 �± 0.02
Working time Approx. 30 min. (at 23 C)
Substrate temp. Min 10 C , max 30C
Initial Curing time Approx. 24 h (at 23 C)
Fully cured 7 days (at 23 C)
Hardness, Shore D > 82
How to use
Surface preparation:
The surface must be clean, dry, and free of dust. The all damaged areas, cracks and surface irregularities must be
repaired and smoothened.
Mixing:
It is important to remember that this cast has a limited work time (Approx. 30 min. at 23 C).Therefore it is wise to
check and make sure everything is in order before starting the mixing sequence.
Stir the contents of part A with an electrical stirrer .Add part B to part A completely for 2 - 3 minutes with a low speed
stirrer until a homogenous mix is achieved. Be careful not to introduce any air bubbles while mixing until a uniform
consistency is obtained. Afterwards the mixture is left to rest for approx. 5 minutes, then pouring Magic Pox in
prepared surface.
Processing conditions:
Temperature-The optimal processing temperature is about 20 C. Raising the temperature by 10 C halves the
pot life and doubles the reactivity
Air humidity The relative air humidity during processing should not exceed 65 %.
Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal
reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 C) can counteract
too great an exothermal reaction.
Cleaning
Cleaning all tools and equipments immediately after use with acetone or cellulose thinners.
Health and Safety
Use gloves and breathing mask when applying.
Apply forced ventilation in confined spaces.
Skin splashes to be removed with hand cleanser, soap and water.
Eye splashes to be removed with plenty of water.
If ingested seek medical advice

Pox Cure - LH 1443 is a modified cycloaliphatic polyamine free solvent hardener.
Pox Cure - LH 1443 is preferably used in combination with suitable epoxy resin formulations for
, Self-leveling good quality flooring
, Chemical resistance mortars and linings
, High solids coatings
, Anti-corrosion coatings
, Decorative tile grouts
, High solids maintenance primers
, Other construction applications
Mix Of :60 gm with 100 gm epoxy resin
Pot life :app. 25 min from 23 to 40�?�°C for 100 ml
Shore D :> 82
Standard Bisphenol-A based (DGEBA, EEW=190) epoxy resin*
Advantages:
, Nonylphenol free
, Low viscosity
, Light-colored films with good color stability
, Can be used in contact with drinking water and food production areas
, Good chemical and mechanical properties
, Good resistance to amine blush with high gloss
Appearance :Clear liquid
Viscosity at 23 °C :app. 400 mPa.s