Purpose: BIOL-A detergent is intended for removing scale, fat, mold, corrosive and other organic-mineral contaminants, and biofilms in dishwashers and washing machines.
Eliminates deposits in the detergent compartments. Provides hygienic cleanliness and neutralizes unpleasant odors. Contains corrosion inhibitors to protect metal parts without affecting rubber seals. Ideal for combating unpleasant odors in pumps. Suitable for all dishwashers and washing machines, detergent compartments and pumps
Biolistov cleaning agent for washing machines and dishwashers "BIOL-A"
The advantages of the detergent are:
1.Environmentally friendly detergent for washing and cleaning surfaces from organic-mineral contamination.
A wide range of applications (washing and cleaning the surfaces of objects, plumbing, technological and auxiliary equipment in the food industry, medicine, at heat power facilities, housing and communal services, at public catering establishments, in the river and sea fleet, in construction and in everyday life.
Dissolves streaks, rust stains, adding shine to equipment
Does not corrode seals, does not affect plastic, glass, rubber, fluoroplastic
Removes unpleasant odors in washing machines and dishwashers
Extends the life of dishwashers and washing machines.
Price-quality
We are a supplier of used and new Heidelberg printing machine, parts and consumables globally , we acknowledge the demand of offset products and we want to fill that gap by bringing to the world the best affordable quality offset products.
Okelcor GmbH offers a complete product range of more than 400.000 aftermarket replacement parts for all common European, Asian and American cars, trucks, busses and construction, agricultural, marine and stationary machinery. By selling genuine spare parts of high quality German, European brands only, Okelcor GmbH guarantees for its customer's satisfaction.
Exporting aftermarket spare parts to many different African, Latin American, north American, Europeans and Asian countries by serving as a reliable partner to its continuously growing number of customers. As a native export wholesaler and semi bulk seller, Okelcor GmbH is always taking into account the different requirements of each regional market and customer.
From air freights, less than container loads and full container loads of spare parts to bus loads and truck loads, from the warehousing of replacement parts to the collection and assembly / consolidation of spare part consignments, Okelcor GmbH's logistic Partners offers any service required by its international customers.
The CNC3200A is the optimal solution to manufacture double sided circuits. The standard configuration includes an automatic replace tool system and a high-precision screw made in Germany. Equipped with a three axis controller and a high precision step motor to control the X, Y and Z-axis.
Features:
A. advanced: suit for double side PCB ,can engrave ,drill, cut the PCB.
B. effective: it takes only several minute to finish one PCB.
C. high precision: Standard configure Germany precision screw and three axis controller with high precision step motor; control the X Y Z axis precision to make sure the high precision.
D. convenient: software installation is easy and suit for variety PCB.
E. confidential: no need outsourcing processing ,lab can finish the whole process .
F. software is powerful, convenience and fast, have memories for processing, can continue to work when interrupt at any process.
G. With three face transparent sound insulation dust-proof covers, suitable for teaching demonstration and observation angles, and the front door with safety device to protect the safety of operators
H. standard configure tool cooling system, can prolong the lifetime of the tool, also can improve the precision.
I. Carving process can remove the excess of copper all laid or remove the copper on the line, remain the excess copper, saving time and improve the effective.
J. multi-function transfer software is suit for variety PCB design software.
K standard configure automatic replace tool system, can automatically replace 9 pcs tools, extend up to 18 pc tools (optional).
L. Configuration sound insulation dust cover, and safety device, can make sure the safety of operator when working.
Technology parameters:
1. Min line diameter: 4mil
2. Min line width: 0.15mm
3. Minimum insulation spacing: 0.15mm
4. Repeated precision: 0.02mm
5. Min hole diameter: 0.15mm
6. Transmission resolution: 0.001mm
7. Work table: 310*410*130mm, work size: 500*375mm
10. Automatically replace tools: 9 pcs tools, 3mm - 3.175mm, can add up to 36pcs tools.
11. Drilling speed: Max 100pc/min
12. Transmission way: standard configure Germany precision screw and three axis controller with high precision step motor, Pneumatic tools chuck, fabrics hood.
13. Flatness compensation: The flatness of PCB make assures high-precision results.
14. Lighting device: With lighting device, convenient to view the engraving process.
15. Dust collection device: professional dust collection device to assure that the inner body is clean, which is makes the engraving process viewable. Optional: Use of vacuum worktable.
16. Software: Includes a professional automatic tool, multi-axial engraving software, easy to input NCP, PLT, DIN 66025 format.
17. Protective cover: can view at 360 angel, also with safety switch to make sure the operator’ safety.
18. Operating system: Win98/ 2000/ XP
19. Min memory: 512MB
20. Handheld magnifying glass: Magnification of 40 times with mm scale and lighting.
21. Special air pump: 30L air cans, max air pressure is 8 bar, air flow is 100 L/min.
22. Dimension: 700*700*700mm
23. Speed of no load: 100mm/s
24. Trough mill speed: 6mm/s
547 Washing Machine Parts Suppliers
Short on time? Let Washing Machine Parts sellers contact you.
The TP-serie are machines describing fully automatic vision SMT pick and place machines, which can mount a variety of components through the vacuum nozzle.
The TP66V is suitable for most of the SMD components such as 0402, SOICs, PLCCs and QFP ICs. With the vision position system it is able to mount 0.5mm of QFP ICs or BGAs. Beside the standard circle reference point, also a square point, which is not the PCB solder paste screen printing pad ring perforated pad, can be chosen as a reference point.
Features:
1. Using imported precision square rail, effectively improve the placement accuracy.
2. Using an unique high-definition optical prism industrial camera to complete mount high-precision components.
3. With the vision position system, it can automatically identify the MARK point to improve effectively your SMT production efficiency and placement accuracy.
4. Automatic visual programming. There is no need of a manual input the coordinates of components.
5. Standard configuration of automatic nozzle replacement system.
6. Able to configure a variety of different feeders to meet your needed requirements for mounting.
7. Easy to input CAD data of the PCB.
8. The software can display all PCB coordinates, which you can adjust by fine tuning some of the coordinates to assure a high precision placement.
Standard Configuration:
1. Industrial Computer: 1 piece
2. Mounting head: 1 groups
3. Nozzles: 9 pcs
4. GFTA-48 feeder table: 2 sets
5. MARK cameras: 2 sets
6. QFP high precision industrial camera: 1set
7. QFP high clear light source: 2 set
Optional:
1. Automatic feeder: 8mm, 12mm, 16mm and 24mm
2. IC Disc Feeder（GFQN）
3. Components bulk disk（GFSN）
4. Nozzles
5. AQ38 end mirror system（25MM-38MM QFP）
6. AQ45 end mirror system（38MM-45MM QFP）
7. Industrial air pump
Technical Parameter:
Mounting head: 2 units - 12 heads
Max size of PCB: 1500 x 316mm
Min width of PCB: 40mm
Max moving range: 670 x 620mm
Max thickness of components: 15mm
Typical speed: 14.000 - 17.000cph
Max speed: 32.000cph
X, Y-axis precision: 0.002mm
Mounting precision: +/- 0.03mm
Available components: > 0402 and < 38mm pitch; > 0.5mm IC
Positioning: Visual positioning
Program method: Automatic data import/ video learning/ keyboard input
Transmission: X, Y-axis high precision ball screw with precision guide rail
Tape feeder: Optional 8mm, 12mm, 16mm, 24mm, 32mm, 44mm
Number of Feeders: Possibility of 96 feeders of 8mm GFTA-08S feeder, 48 feeders for the front and 48 for the back side.
Number of IC feeder: Max 2 pcs
Operation system: Windows XP
Compressed air: 80psi (0.5Mpa - 0.7Mpa)
Power supply: 220V, 50Hz, 5kW
Weight: 14000kg
Dimension: 1650 x 1485 x 1400mm
High-quality dried rosemary leaves from Morocco, carefully cleaned and sorted. Ideal for culinary use, herbal tea blends, and essential oil production. Available in both whole and cut forms. Consistent quality with low woody content and strong aroma.
Part A Solution available in 4 Litre,5 Litre and and 10 litre.
Part B available in powder form for 1 and 5 Dialysis sessions (4 Hours each)
it is available in any custom formation
Advantages
Custom Formulations
Pyrogen-free Product
Part A is sealed and leak-proof, packed in Pharma-grade HDPE canisters (cans)
Part B is in powder form hence saves lot of volume, freight with easy handling
Part B is of highest quality (BP/EP) and is granulated for easy flow. Mixing is excellent
with no residue
Precision in Formulation, hence easy calibrations on dialysis machine
About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties
Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc
We stock a variety of Frozen Beef Parts which can be procured as per the requirements of the customers. We are a prominent name among Frozen Beef Meat Exporters owing to our focus on timely delivery and optimum quality.
Processed Frozen Beef Meat
Our range is available in different forms that are as follows:
Silver Side
Thick Flank
Top Side
Rump Steak
Shin Shank
Trimmings
Fore Quarter Rolls
Thick Flank
Knuckle
Rump Steak
Strip Loin
Thick Flank
Blade
Brisket
Chuck
Neck
CATTLE BEEF CARCASS AND SPECIAL CUTS
Beef Carcass
SPECIAL CUTS
Topside
Silverside
Brisket
Blade
Shin-shank
Cube roll
Tenderloin
Striploin
Chuck tender
Chunks/slices
Trimming
Mince
VEAL
Bobby Veal
Veal Tenderloin
Veal Leg
OFFALS
Tongue(Shortcut)
Tail
Kidney
Heart
Liver
Lung
Natural Green Tripe
Tripe Cooked
Cheek Meat
Neck Band / paddywack
Omasum A Grade (700gm up )
Omasum B Grade (500gm - 700gm)
Omasum C Grade (300gm - 500gm)
We stock a variety of Frozen Beef Parts which can be procured as per the requirements of the customers. We are a prominent name among Frozen Beef Meat Exporters owing to our focus on timely delivery and optimum quality.
Processed Frozen Beef Meat
Our range is available in different forms that are as follows:
Silver Side
Thick Flank
Top Side
Rump Steak
Shin Shank
Trimmings
Fore Quarter Rolls
Thick Flank
Knuckle
Rump Steak
Strip Loin
Thick Flank
Blade
Brisket
Chuck
Neck
CATTLE BEEF CARCASS AND SPECIAL CUTS
Beef Carcass
SPECIAL CUTS
Topside
Silverside
Brisket
Blade
Shin-shank
Cube roll
Tenderloin
Striploin
Chuck tender
Chunks/slices
Trimming
Mince
VEAL
Bobby Veal
Veal Tenderloin
Veal Leg
OFFALS
Tongue(Shortcut)
Tail
Kidney
Heart
Liver
Lung
Natural Green Tripe
Tripe Cooked
Cheek Meat
Neck Band / paddywack
Omasum A Grade (700gm up )
Omasum B Grade (500gm - 700gm)
Omasum C Grade (300gm - 500gm)
We stock a variety of Frozen Beef Parts which can be procured as per the requirements of the customers. We are a prominent name among Frozen Beef Meat Exporters owing to our focus on timely delivery and optimum quality.
Processed Frozen Beef Meat
Our range is available in different forms that are as follows:
Silver Side
Thick Flank
Top Side
Rump Steak
Shin Shank
Trimmings
Fore Quarter Rolls
Thick Flank
Knuckle
Rump Steak
Strip Loin
Thick Flank
Blade
Brisket
Chuck
Neck
CATTLE BEEF CARCASS AND SPECIAL CUTS
Beef Carcass
SPECIAL CUTS
Topside
Silverside
Brisket
Blade
Shin-shank
Cube roll
Tenderloin
Striploin
Chuck tender
Chunks/slices
Trimming
Mince
VEAL
Bobby Veal
Veal Tenderloin
Veal Leg
OFFALS
Tongue(Shortcut)
Tail
Kidney
Heart
Liver
Lung
Natural Green Tripe
Tripe Cooked
Cheek Meat
Neck Band / paddywack
Omasum A Grade (700gm up )
Omasum B Grade (500gm - 700gm)
Omasum C Grade (300gm - 500gm)
We stock a variety of Frozen Beef Parts which can be procured as per the requirements of the customers. We are a prominent name among Frozen Beef Meat Exporters owing to our focus on timely delivery and optimum quality.
Processed Frozen Beef Meat
Our range is available in different forms that are as follows:
Silver Side
Thick Flank
Top Side
Rump Steak
Shin Shank
Trimmings
Fore Quarter Rolls
Thick Flank
Knuckle
Rump Steak
Strip Loin
Thick Flank
Blade
Brisket
Chuck
Neck
CATTLE BEEF CARCASS AND SPECIAL CUTS
Beef Carcass
SPECIAL CUTS
Topside
Silverside
Brisket
Blade
Shin-shank
Cube roll
Tenderloin
Striploin
Chuck tender
Chunks/slices
Trimming
Mince
VEAL
Bobby Veal
Veal Tenderloin
Veal Leg
OFFALS
Tongue(Shortcut)
Tail
Kidney
Heart
Liver
Lung
Natural Green Tripe
Tripe Cooked
Cheek Meat
Neck Band / paddywack
Omasum A Grade (700gm up )
Omasum B Grade (500gm - 700gm)
Omasum C Grade (300gm - 500gm)
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles. Its parameters include density at 15C (typically at this temperature it will have a density of 0.856kg/m3 with a minimum of 0.82kg/m3 required), a typical 0.1% carbon residue value (where the maximum permitted for this grade is 0.3%). The minimum flashpoint (the lowest temperature at which the fuel produces vapour that is an ignitable mixture in air near the surface of the liquid) is 56C.
547 Washing Machine Parts Suppliers
Short on time? Let Washing Machine Parts sellers contact you.
