Find Verified Telecom Assemblies Suppliers, Manufacturers and Wholesalers

Okelcor GmbH offers a complete product range of more than 400.000 aftermarket replacement parts for all common European, Asian and American cars, trucks, busses and construction, agricultural, marine and stationary machinery. By selling genuine spare parts of high quality German, European brands only, Okelcor GmbH guarantees for its customer's satisfaction.

Exporting aftermarket spare parts to many different African, Latin American, north American, Europeans and Asian countries by serving as a reliable partner to its continuously growing number of customers. As a native export wholesaler and semi bulk seller, Okelcor GmbH is always taking into account the different requirements of each regional market and customer.

From air freights, less than container loads and full container loads of spare parts to bus loads and truck loads, from the warehousing of replacement parts to the collection and assembly / consolidation of spare part consignments, Okelcor GmbH's logistic Partners offers any service required by its international customers.

Introduction:
The LED660V is a professional LED pick and place machine, features high-speed and high-accuracy. It is your optimal solution for LED circuit board high-volume assembly.
Features:
1. Board driving system uses high precision step motor, which is driven by an industrial belt. It cooperates with a precision guide-rail to improve the placement accuracy and board driving speed.
2. Integrated 6 mounting heads driving system with servo motor. Together with the high precision ball screw, it achieves the complete pick and place process of the LED components.
3. The 6 groups of mount heads improves the production efficiency of 400%, compared with 1 group of heads.
4. Automatic visual programming. No need of manual input of the component coordinates. Programming is simple and fast, a new program is finished within 10 min.
5. Different sizes of smart feeders, which will not move if the component stuck or isn’t picked up properly.
6. The LED660V is a cost-effective mounter which suits optimal a high-volume LED production.
7. The whole machine is controlled by an industrial computer with professional software, easy to operate and use.
8. Easy to import CAD data of the circuit boards.
9. Stable and easy to complete the programming and placement of LED panel board.
10. The coordinates of the PCB can be displayed, opportunity of a fine adjustment for these coordinates to achieve high-precision placement.
11. The space of panel board can be set in the software, all component placing coordinates will be shown according to the space of panel board. Selection of PCBs, which shall not be mount is possible as well.
12. If the board have manufacturing quality problems, the LED660 can shift the component place for accurate mounting.
13. The software includes a 6 grades speed changing function, you can find your adequate speed according to the distance check sheet. Besides, the speed adjustment can increase the stability for long time usage.
14. The PCB platform has a vacuum absorb function, which can help large-size PCBs and FPCs to position accurately and improve the placement accuracy.
15. Integrated vacuum pump inside the machine, no need to configure it separately.
16. The LED660V is a special LED mounter, which can mount all kinds of SMD LED chips, all components above 0402 (except more than 5mm Aluminum electrolytic capacitors ), cylindrical diodes, transistors, SOPs, and SOTs smaller than 20mm IC.

Technical Parameter:

Mounting heads: 6pcs
Max size of PCB: 1200 x 350mm
Max moving range: X-axis: 1500mm, Y-axis: 410mm
Max moving range of Z-axis: 15mm
Typical mounting speed: 13.000 - 14.000cph
Max mounting speed: 18.000cph
Mounting accuracy: +/- 0.1mm
Positioning method: Visual positioning
Component available: SMD components >0603 and LEDs, SOTs, SOPs
Program method: Automatic data import/ video study/ keyboard input
Belt feeder: Optional: 8mm, 12mm, 16mm, 24mm
Number of feeders: 6pcs of GF feeder can be set, optional 12 feeders possible.
Operation system: Windows XP
Air pressure: Internal vacuum
Power supply: 220V,50Hz, 4.5kW
Weight: 500kg
Dimension: 2600 x 680 x 1500mm

The CNC3200A is the optimal solution to manufacture double sided circuits. The standard configuration includes an automatic replace tool system and a high-precision screw made in Germany. Equipped with a three axis controller and a high precision step motor to control the X, Y and Z-axis.

Features:
A. advanced: suit for double side PCB ,can engrave ,drill, cut the PCB.
B. effective: it takes only several minute to finish one PCB.
C. high precision: Standard configure Germany precision screw and three axis controller with high precision step motor; control the X Y Z axis precision to make sure the high precision.
D. convenient: software installation is easy and suit for variety PCB.
E. confidential: no need outsourcing processing ,lab can finish the whole process .
F. software is powerful, convenience and fast, have memories for processing, can continue to work when interrupt at any process.
G. With three face transparent sound insulation dust-proof covers, suitable for teaching demonstration and observation angles, and the front door with safety device to protect the safety of operators
H. standard configure tool cooling system, can prolong the lifetime of the tool, also can improve the precision.
I. Carving process can remove the excess of copper all laid or remove the copper on the line, remain the excess copper, saving time and improve the effective.
J. multi-function transfer software is suit for variety PCB design software.
K standard configure automatic replace tool system, can automatically replace 9 pcs tools, extend up to 18 pc tools (optional).
L. Configuration sound insulation dust cover, and safety device, can make sure the safety of operator when working.

Technology parameters:

1. Min line diameter: 4mil

2. Min line width: 0.15mm

3. Minimum insulation spacing: 0.15mm

4. Repeated precision: 0.02mm

5. Min hole diameter: 0.15mm

6. Transmission resolution: 0.001mm

7. Work table: 310*410*130mm, work size: 500*375mm

8. Spindle speed: 10000-60000RPM Infinitely adjustable, spindle power: 200W to 250W.

9. Three axis speed: 100*100*100mm

10. Automatically replace tools: 9 pcs tools, 3mm - 3.175mm, can add up to 36pcs tools.

11. Drilling speed: Max 100pc/min

12. Transmission way: standard configure Germany precision screw and three axis controller with high precision step motor, Pneumatic tools chuck, fabrics hood.

13. Flatness compensation: The flatness of PCB make assures high-precision results.

14. Lighting device: With lighting device, convenient to view the engraving process.

15. Dust collection device: professional dust collection device to assure that the inner body is clean, which is makes the engraving process viewable. Optional: Use of vacuum worktable.

16. Software: Includes a professional automatic tool, multi-axial engraving software, easy to input NCP, PLT, DIN 66025 format.

17. Protective cover: can view at 360 angel, also with safety switch to make sure the operator’ safety.

18. Operating system: Win98/ 2000/ XP

19. Min memory: 512MB

20. Handheld magnifying glass: Magnification of 40 times with mm scale and lighting.

21. Special air pump: 30L air cans, max air pressure is 8 bar, air flow is 100 L/min.

22. Dimension: 700*700*700mm

23. Speed of no load: 100mm/s

24. Trough mill speed: 6mm/s

Introduction：

The TP-serie are machines describing fully automatic vision SMT pick and place machines, which can mount a variety of components through the vacuum nozzle.

The TP66V is suitable for most of the SMD components such as 0402, SOICs, PLCCs and QFP ICs. With the vision position system it is able to mount 0.5mm of QFP ICs or BGAs. Beside the standard circle reference point, also a square point, which is not the PCB solder paste screen printing pad ring perforated pad, can be chosen as a reference point.

Features:

1. Using imported precision square rail, effectively improve the placement accuracy.
2. Using an unique high-definition optical prism industrial camera to complete mount high-precision components.
3. With the vision position system, it can automatically identify the MARK point to improve effectively your SMT production efficiency and placement accuracy.
4. Automatic visual programming. There is no need of a manual input the coordinates of components.
5. Standard configuration of automatic nozzle replacement system.
6. Able to configure a variety of different feeders to meet your needed requirements for mounting.
7. Easy to input CAD data of the PCB.
8. The software can display all PCB coordinates, which you can adjust by fine tuning some of the coordinates to assure a high precision placement.

Standard Configuration:

1. Industrial Computer: 1 piece
2. Mounting head: 1 groups
3. Nozzles: 9 pcs
4. GFTA-48 feeder table: 2 sets
5. MARK cameras: 2 sets
6. QFP high precision industrial camera: 1set
7. QFP high clear light source: 2 set

Optional:
1. Automatic feeder: 8mm, 12mm, 16mm and 24mm
2. IC Disc Feeder（GFQN）
3. Components bulk disk（GFSN）
4. Nozzles
5. AQ38 end mirror system（25MM-38MM QFP）
6. AQ45 end mirror system（38MM-45MM QFP）
7. Industrial air pump

Technical Parameter:

Mounting head: 2 units - 12 heads
Max size of PCB: 1500 x 316mm
Min width of PCB: 40mm
Max moving range: 670 x 620mm
Max thickness of components: 15mm
Typical speed: 14.000 - 17.000cph
Max speed: 32.000cph
X, Y-axis precision: 0.002mm
Mounting precision: +/- 0.03mm
Available components: > 0402 and < 38mm pitch; > 0.5mm IC
Positioning: Visual positioning
Program method: Automatic data import/ video learning/ keyboard input
Transmission: X, Y-axis high precision ball screw with precision guide rail
Tape feeder: Optional 8mm, 12mm, 16mm, 24mm, 32mm, 44mm
Number of Feeders: Possibility of 96 feeders of 8mm GFTA-08S feeder, 48 feeders for the front and 48 for the back side.
Number of IC feeder: Max 2 pcs
Operation system: Windows XP
Compressed air: 80psi (0.5Mpa - 0.7Mpa)
Power supply: 220V, 50Hz, 5kW
Weight: 14000kg
Dimension: 1650 x 1485 x 1400mm

Introduction:

The automatic pick and place machine TP210+ is a desk type high speed pick n place machine. It is a cost-effective SMD mounter.
The TP210+ can mount 0603, 0805, 1206 and many more. It can fabricate SOPs and SOICs (size under 15*15mm, PIN foot less than 24) as well.
TP210+ equips 22 pcs of 8 feeders (electric feeder of 8mm, 12mm, 16mm,24mm can be chosen). The Z-axis can route freely and can meet requirements of various angle component.

Main parts:

1. Step motor with a function to change the angle: able to mount 45°, 90°,180° angle component.

2. Dual Parallel square-type wide guide rail. Compared with a balling guide rail, the guide rail has a small space to ensure a high accuracy.

3. Visual + machinery position system: The camera nearby mounting head can magnifying through a '+' cursor to ensure an accurate mark point position.

4. No-contact flying centering system: Flying centering system can mount a variety of SMD components including: 0603, 0805,1206, many more and SOPs, SOICs with a size under 15*15mm, PIN foot less than 24.

5. Flexible reference point system (RPS): In addition to the standard round reference point, also a square formed and ring formed point with a hole also can be identified as a reference point.

6. All-purpose automatic feeder: 22 pcs of automatic feeder can be chosen. 8mm, 12mm, 16mm, 24mm can be installed according to your component and required speed.
　　
7. It is using a unique air suspended pick and place head design, which can transmit several kinds of large and small component.

8. Protel file of component data import: Software control, limitless data file can be saved in PC, you can call them at any time when needed, easy to operate.

Technical Parameter:

Type: TP210+

Max PCB size: 300x200mm

Max moving range: 400×460mm

Max moving range of Z-axis: 10mm

Typical pick&place speed: 2.600-3.000cph

Max pick & place accuracy: ± 0.014mm

Repeat accuracy: ±0.05mm

Positioning: Visual and machinery positioning

Component Available: 0603, 0805, 1206 etc and SOPs, SOICs (size under 15x15mm, PIN foot less than 24)

Programing method: Software program input

Driving mode: uses industrial synchronous belt

Automatic Feeder: 8mm,12mm,16mm,24mm feeder can be chosen.

Number of feeders: 22 pcs of 8mm feeders

Number of IC Plate: More than 2

Operating system: WINDOWS XP

Air pressure: 80psi(0.5Mpa)

Power supply: 220V,50Hz

Weight: 95kg

Dimension: 980×1000×590mm

Product Description:

The automatic pick and place machine TP400V-II is a cost-effective equipment in the SMT industry. It is able to fabricate a variety of components by the integrated vacuum nozzle. The machine can mount SMD chip components above 0402, SOICs, PLCCs, QFP and ICs. The Vision System is compatable with QFP ICs with a pitch of 0.5mm. Beside the round reference, also square square formed and ring hole pads can be recognized as mark point.

Features:

1. Automatic Mount by control of software.
2. Quick PROTEL data import or manual input.
3. Visual + machinery positioning.
4. Visual programming system can identify the reference point automatically to improve the production efficiency and accuracy.
5. The visual programming system can produce X, Y coordinates of all components automatically after confirmed the basic reference points and to complete the mounting process.
6. Unique optical prism and high-definition industrial cameras for placing high-precision components.
7. Equipped with a high-precision quadrate guide rail and smooth gliding arm for improving mounting accuracy.
8. Air suspended head for pick- and place-process.
9. Automatic nozzle replacement system.

Optional:

1. Automatic feeder
2. IC disc
3. Automatic PCB transmission system

Main parts:

1. DC servo motor driving system:
It uses loop DC servo motor driving system for a high precision repeating accuracy and stability.
2. Vision centering system: Vision centering system can mount 0.5mm pitch QFP ICs.
3. No-contact flying centering system: Flying centering system can mount most of SMD components including: 0402, SOICs，PLCCs & QFP ICs.
4. Flexible reference point system (RPS): In addition to the standard round reference point, also a square formed and ring formed PCB pad with a whole can be identified as a reference point.
5. All-purpose automatic feeder: The TP400V-II has 8mm, 12mm, 16mm, 24mm feeders which you can choose to install.
6. Flexible tray-type station: The TP400V can equip 2 trays which helps to mount bulk components under the semi-auto mode.
7. CAD/ Protel data transfer: Besides studying the component coordinate by Camera or keyboard input, you can choose the CAD transfer software WCAD to transfer the PCB’s CAD into pick and place data.
8. Buffering nozzle: Buffering nozzle can adjust the pressure automatically according to different components height to avoid damage due to different component heights or programming errors. It is suitable for various types of pick and place ceramic components and ceramic circuit boards.

Technical Parameter:

Type: TP400V-II (V: industrial camera at bottom)

Max printing size: 400×350mm

Max moving range: 400×630mm

Z axis max moving range: 70mm

Typical mounting speed: 2000-2800cph

Max mounting speed: 3500cph

Mounting accuracy: ±0.05mm

Component available: SMD components > 0402 and SOICs、PLCCs、QFP ICs < 38mm

Positioning method: Visual positioning

Programming method: Video study/ keyboards input/ data import

Driving way: Y-axis uses industrial synchronous belt drive, X-axis uses imported high precision lead screw.

Automatic Feeder: 8mm, 12mm, 16mm, 24mm feeder

Feeder Number: 1. Place 72 pieces of 8MM feeder CFTA-08S, 36 pieces at the front and back side.
2. Place 60 pieces of 8MM feeder GFTA-08S, 30 pieces at the front and back side.

PCB board input system: Automatic (Standard configuration)

Automatic Nozzle changing system: Automatic (Standard configuration)

IC tray number: 2

Operation system: WINDOWS XP

Compressed air: 80psi (0.5Mpa)

Power supply: 220V, 50Hz, 3kw

Weight: 310kg

Dimension: 1280×1410×750mm

Kitchen swivel sprayer with rotary head
Kitchen faucet aerator û product characteristics

* reduces energy costs and unnecessary water usage: uses just 7.6 liters/min at 3 bar
* adjustable jet for softer or stronger spray
* the water-saving kitchen sprayer!
* with the included adapter it fits every water pipe with a m24x1 or m22x1 connection
* easy to assemble, swivel sprayer ideal for the kitchen
* robust design with metallic joint.

Extending table
Extending table made of solid hevea (rubberwood),
H:765mm, w:850mm, l:1800mm to 3600mm
Seats 8-14 people
Extendable in 4 steps of 450mm each
All 4 leaves store beneath table top
Self assembly
Moq: 72 pcs

Each table packed in two cartons, 85 kg

Specification:
General
Certificate CE
Network Operator (Parts of Countries)
France Bouygues 3G, SFR 3G, Orange 3G, Free 3G, Bouygues 4G, SFR 4G, Orange 4G, Free 4G
UK 3 3G, Orange 3G, T-Mobile 3G, Vodafone 3G, O2 3G, 3 4G, EE 4G, Vodafone 4G, O2 4G
Italy 3 3G, Vodafone 3G, TIM 3G, Vodafone 4G, TIM 4G, Wind Tre 4G
Spain Movistar 3G, Orange 3G, Vodafone 3G, Yoigo 3G, Movistar 4G, Orange 4G, Vodafone 4G, Yoigo 4G
Russia MTS 3G, MegaFon 3G, Beeline 3G, VimpelCom (Beeline) 4G, MTS 4G, MegaFon 4G, Motiv 4G, Tele2 (Rostelecom) 4G,Vainakh Telecom 4G, Tattelecom 4G
USA T-Mobile 3G, T-Mobile 4G, AT&T 4G, Plateau Wireless 3G, Union Wireless 3G, Viaero Wireless 3G, West Central Wireless 3G, U.S. Cellular 4G, Verizon 4G, Rock Wireless 4G, United Wireless 4G, Rise Broadband 4G, West Central Wireless 4G, Sprint 4G, Silver Star 4G, Adams Networks 4G, BIT Broadband (Wildfire) 4G, Bluegrass Cellular 4G, C Spire 4G, ClearTalk 4G, Colorado Valley Com 4G, ETC 4G, Evolve Broadband 4G, Infrastructure Networks 4G,iWireless 4G, Limitless Mobile 4G, Mosaic Telecom 4G, Nex-Tech Wireless 4G, Nortex (SkyFi) 4G, PTCI 4G, PTC 4G,Speed Connect 4G, Space Data Corporation 4G
Japan NTT DoCoMo 3G, SoftBank 3G, NTT DoCoMo 4G, SoftBank 4G, KDDI 4G
General
Model P30 Pro VOG-AL00
Central Processing Unit(CPU) HUAWEI Kirin 980 Octa Core up to 2.6GHz
GPU Mali G76 720MHz
SIM Quantity Dual SIM
SIM Types Nano SIM Card
OS System Android 9.0
RAM 8GB
ROM 128GB

Network
4G Bands FDD-LTE
3G Bands TD-SCDMA
2G Bands GSM 850
Type WCDMA, GSM, FDD-LTE, TDD-LTE, TD-SCDMA
WIFI 802.11 a/b/g/n/ac(wave2), MIMO, VHT160, 2.4G&5G
GPS Yes, A-GPS, GLONASS, BDS, Galileo, QZSS
BT Yes, V5.0, BLE
Display
Screen Size 6.47 inch
Screen Type OLED
Screen Color 16.7M
Resolution 2340 x 1080 pixels
Multi-Touch 10 Points
Camera
Camera Quantity 4
Front Camera 32MP
Back Camera 40MP+20MP+8MP
Rear Flashlight Yes
Camera Function BSI
Video recording Yes
Video Resolution 4K(Rear: AIS), 720p@960fps
Connectivity
Ports 2 x Nano SIM card slots
1 x Type C
1 x NM card slot
Battery
Battery Types Undetachable, Li-polymer Battery
Battery Capacity 4200mAh
Talk time 31 hours (3G)
Standby time 18.2 days
Charging Time 1.1 hours
Quick Charge Yes
Charging Power 10V/4A, 4.5V/5A, 5V/4.5A,9V/2A, wireless 15W
Dimensions & Weight
Size 158.0*73.4*8.41mm
Weight 192g
Package Include
Package Contents 1 x Phone
1 x Earphone
1 x Protective Case
1 x USB Cable
1 x US Plug Power Adapter
Package Weight
One Package Weight 0.51kgs / 1.11lb
Qty per Carton 20
Carton Weight 10.50kgs / 23.15lb
Carton Size 42cm * 38cm * 27cm / 16.54inch * 14.96inch * 10.63inch

Quantity: 500

Price: 45,99 â?¬

Folding bed size 80X200 cm, metal structure, with wheels, included with mattress H. 11 cm, 80 x 200 cm

The folding bed by Bflyshop is extremely comfortable, very stable and can be folded when not in use. It will save you space when not in use and provide a stable and comfortable bed for your guests.

Mattress: cold foam, height approx. 11 cm. Lining: 100% polyester Load capacity: max. 120 kg, when not in use, it can be folded and stored easily.
The bed offers a sleeping area of approximately 192x76cm and a total area of 200x90 cm. The cold foam mattress has a thickness of about 11 cm, therefore optimal for quality rest.
When folded, it measures approximately 80 cm (L) 36 cm (H) 105 cm (P)

This folding bed by Bflyshop with mattress as well as with slatted wooden bed frame is ideal for your home, guest room, bedroom, adult, for kids and camping as it can be used as guest mattress, camping bed, travel cot, folding bed as well as emergency bed in case of need


SIZE FOLDING BED OPENED CM 90X200X27
SIZE ASSEMBLED FOLDING BED CLOSED CM 100X80X36
SIZE FOLDING BED PACKEDCM 80X92X37

IRON PIPE PARTS
( BRD production department )
IRON PIPE Dia. 25x1xmm
IRON PIPE Dia. 14x1xmm
SQUARE IRON PIPE 25X25X1
NR. 4 RIVETS 5X25 ZINC PLATED
NR. 4 RIVETS 5X32 ZINC PLATED
NR. 2 IRON PLATE 85X1,5mm
NR. 2 CROSS STEEL 15X4 mm
NR. 2 PLATE FOR LEGS 20X3X282
PAINTING ( VRN)
EPOXY POWEDER DARK METAL GREY

WOODEN PARTS
( assembling department )
NR. 15 BIRCH PLYWOOD SLATS EVAPORETED CM 89,3X6,8X0,8
PLASTIC PARTS ASSEMBLED NR. 30 CAPS X SLATS MM 70 BLACK ( assembling dep. )
Nr. 2 CLOSING PLIER 14X36 ( packing dep. )
FITTINGS TO ASSEMBLE Nr. 1 SET OF FITTINGS MADE UP:
NR. 4 WHEELS - NR. 4 NUTS M8 , NR. 4 UNDERSTRAP CLIPS, NR. 4 SCREWS 6X12, NR. 4 NUTS M6, NR. 4 WASHER,
NR. 8 SCREWS 6X35
PRICE:
90x200: â?¬ 49,99 80x200: â?¬ 45,99
With Cover: + â?¬ 5,00
With pre-assemby: + â?¬ 2,00