The equipment is designed and manufactured by Gough & Co Ldt, UK in year 1999 / installed in 2000, manufacturer’s type single deck Vibracon GVF4. We have totally 3 identical units which were dismantled in 2007 and all of them are in very good operational condition. These are single deck circular screen design for high velocity scalping, de-watering or single deck separation in chemical and pharmaceutical industry. (These units were screening oversized particles in PVC - granulate factory truck loading station) The perforated screen and all product touching parts are made on stainless steel AISI 304L. Top deck houses the screen and the discharge spout for oversize particle removal is fitted to it. Top deck is supported with mechanical spring and vibration movement is created by two contra rotating vibrating motors on the outside of the unit so there are no internal working parts. Vibration power can be adjusted.
Technical data:
Type: Vibracon GVF 4
Material: AISI 304L – product touching parts
Perforated screen: Mesh size 4 mm
Screen diameter: 1100 mm
Screen area: 9500 cm2
Vibrators: 2 x 0.52 kW units.
External basic ADSL modem for single computers. Connection to PC is USB. ull rate speed support up to 8MBps
The modems are ANNEX A type and there is support for
major protocols: G.DMT, T1.413, PPPoA, PPPoE, T1.483
Issue 2
G.992.1, G992.2.
9x/Me/NT/2000/XP.
Qty: 7000 pcs in-stock
Brand new, bulk packed (20 in box)
Warranty 1 year
Price $7 each , or make offer to take all
FOB Helsinki , Finland
Krones Toptronic K 719-555 Rotary Empty Bottle Inspector
The Toptronic inspector is made for inspecting empty returnable PET bottles and empty non-returnable and returnable glass bottles. It utilizes state-of-the-art camera technology to provide precision empty container inspection. The sophisticated inspection modules detect even the tiniest damage or contamination – both in glass and PET returnable bottles.
General design features
Modular design
Table top cover and stand cladding in stainless steel
Safe bottle guidance with Raptec handling parts
Blower for removing foam and lubricant residues from the container base
Enclosed and air-conditioned electronics cabinet
Electronic function monitoring
Stop function upstream of machine infeed in response to fallen-over containers
Rejection unit with retaining bar or clamping starwheel
This unit has been in operation only with PET bottles sizes 0.5 liter (four different types), 1.5 liter ( two different types) 1.0 and 1.25 liter bottles and it has been in operation since 2002 and is still in very good operational condition. Handling tools for above mentioned PET bottles will be a part of delivery.
Technical specification:
Manufactured by: Krones AG, Germany
Manufactured in: 2002
Model: K 719-555
Nominal output: up to 72000 bph
Actual output: 35000 bph (with clamping starwheel)
Inspection units (PET)
For foreign containers P.E sensor and camera
Base 1 Camera
Variostation 1 Camera
- sealing surface
Residual liquid High frequency + infrared
Side wall Camera
Optimized scuffing Camera
Variostation 2 Camera
- Base 2
- inner side wall
- full thread
Variostation 3 Camera
- full thread
- lateral neck finish
- inner side wall
Variostation 4 Camera
- sealing surface
- lateral neck finish
Equipment for SaleGeneral Industry Textile Machinery Process Equipment Energy & Power Wood Working.
The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was installed in 2001 and it has nominal CO2 removal capacity of 1000 kg/h. The plant has Siemens S 7 control system where operation is carried our via a large 12 " color screen panel with Windows CE operating system. This is a complete CO2 recovery plant and final delivery scope depends on buyers needs. The plant has been in operation only approx 5 years and is still installed and in very good condition. The carbon dioxide plants was designed by Danish Union Engineering (www.union.dk ) and the delivery includes following main components:
- 1 Scrubber for gas flushing
- 2 Foam catcher vessels
- CO2 collection, inflammable
- 2 Mehrer TZW 70 CO2 compressors
- 2 Carbon filters
- 2 Dehydrators
- CO2 Liquefier
- CO2 Storage Tank
- 2 Cooling compressors GEA Grasso GD-3 for R717
- Air cooled condenser for NH2 compressors
- Alarm center for CO2 and NH3 concentration
- Station for 40 kg CO2 still tank filling
- CO2 pumping station from a truck to the factory
- CO2 purification tester
- Steam heated evaporator for liquid CO2
Detailed technical information available for serious buyers
9 Touch Screen Lcd Monitors Suppliers
Short on time? Let Touch Screen Lcd Monitors sellers contact you.
The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit.
Operation principle:
Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency.
Technical data:
Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden
Type: ECO 5000 VS-HP, R407C
Year made: 2003
Evaporation capacity: 5000 liters / 24 hour (pure water)
Electricity consump.: about 0,15 kWh / liter pure wateri)
Control unit: Siemens Micromaster 420
Compressor: Bitzer Kuhlmachinenbau GmbH,
Compressor type: 6G-40,2
Compressor capacity: 126.8 m3/h, 19/28 bar
Refrigenerant: R 407 C
Main dimensions: 2.8 m x 1.3 m x 2.9 m
Weight: 1500 kg.
This laminating tunnel / convection oven is made by Swedish TRIAB / Tri Innovations AB in year 2006. The oven is designed for industrial use and in build up in two separable laminating sections, both equipped with one 40.5 kW hot air sections, one product and one return conveyors and common control unit. All product touching parts are made either of stainless steel (structures and panels) or Teflon made net belts. Convection belt (600 mm wide) is located inside of the oven tunnel and has grid type surface, the return conveyor is installed on the tunnel and it has tight waived Teflon belt. The control cabinet is attached to the equipment structures. The speed of laminating conveyor is adjusted with an inverter driven motor. The speed of return conveyor can be fine tuned via a potentiometer. The equipment is featured with a remote control possibility. This has been operating with hygienic products (material foam / polyurethane film, thickness 5 mm, max. width 450 mm and production speed 6 m/min) and is in excellent operational condition with total 3450 operating hours only and it comes with original operation manual in English language.
Technical data:
Made by: TRIAD / Air Innovations AB
Manufacturing year: 2006
Total operating hours: 3450
Convection capacity: 2 x 40.5 kW
Process control PLC: Eurotherm 2216e
Hot air circulation volume: 2 x 9000 m3/h
Fan electric power: 2 x 2.2 kW
Temperature range: 50 – 150 C
Total machine length: 10 000 mm
Total machine width: 1600 mm
Convection belt material: Teflon covered metal net
Convection belt length: 9 000 x 600 mm
Convection belt speed: 3 – 8 m/s / 0.25 kW, inverted controlled
Heated width: 650 mm
Inside / free height: 80 mm (from belt to nozzles)
Return conveyor: Habasit FAB-8EO WV
Return conveyor dimensions: 12000 x 600 mm (Teflon)
Return conveyor drive: 0.25 kW, 380 V/50 Hz.
Rotary Lube Blower / Vacuum compressor KAESER EB 420 C û 38 m3/min, 53 kPa
There are two identical sets of oil-free, 2 lobe rotary blowers, made by Germand Kaeser Kompressoren GmbH in year 2005 with accessories. Manufactures type is Kaeser ED 420 Compact Omega Pluss 53 and accessories include a control cabinet with two inverters and programmable Kaeser Start Control STC 30 unit, totally 6 preliminary intake air filters and 3 final air intake filters with their steel supports. The rotary blower units have removable sound enclose for noise insulation. Operation of the equipment was stopped in year 2007, total running hours approx 7000 and therefore they are in excellent operational condition. In addition, we can offer you service maintenance by the manufacturer at separate cost.
This equipment is suitable for demanding dust collection and pneumatic transportation of various products due to oil free operation. For pneumatic transport application some changes in filters and other parts are needed.
The rotary lobe has two blower shafts with high efficiency Omega profile in a blower block. The rotary lobe and the block have a very small distance and they are not touching each other's and therefore there is no need for lubrication oil. The rotors are driven by high efficiency electric motor via belt connection and they both are installed on the same base frame. . The inlet and discharge silencers are designed to be effective at all frequencies and are eminently suited to variable speed . Higher rotational blower speeds produce high volumetric efficiencies, which in turn lower discharge temperatures and power consumption. The Compact Range ensures that all serviceable items are accessed from the front panels of enclosures.
The preliminary intake air filters are combination of cyclone and bag filter and it removes most of the dust from inlet air. Fine filter is a combination of cyclone and 138 ceramic fine filters which removes fine dust very effectively.
Technical Data
Manufacture's type: EB 420 Compact Omega plus 53
Manufactured in year: 2005
Suction capacity with max vacuum:38,0 m3/min
Power demand max: 40,3 kW
Rotor's rotation speed 4120 rpm
Max suction vacuum: 0,53 bar (abs.)
Discharge pressure: 1,0 bar (abs.)
Max pressure increase: 470 mbar
Temperature rise max -t: 82 K
Electric motor: 45 kW û 50 Hz / 400/690V û 83/48 A
Electric motor nominal speed:2965 rpm
Protection class: IP 55
Inverters: Mitsubishi FR-F740-01160-EC
Case ventilation fan: 370 W û 50 Hz / 230 / 400V
Weight blower with the case:1120 kg
Blower case main dimensions:1.8 x 1.7 x 1.8 m (K x L x S)
Noise level: 99 dB (A)
Noise level with the case: 84 dB (A).
