Find Verified Industrial Clothing Suppliers, Manufacturers and Wholesalers

ELMO-G Blower - Vacuum pump 1000 m3/h

The blowers are made by German ELMO Vacuum Technology GmbH, a Siemens company in year 2002 and they are single stage, gas ring type. The vacuum pumps are in good operational condition. We have three identical pump units and originally the pumps were in dust suction operation and therefore the delivery includes 3 pcs high efficiency cyclone type dust filter with electric discharge vibrators. Motor speed is controlled with individual inverters. Units can be sold separately.

ELMO-G vacuum pumps can be used for suction operation or as compressors in pneumatic transportation system. They have side-channel principle using gas ring as a sealing and the gas flows through the compressor along a helical trajectory and is repeatedly accelerated and thereby repeatedly compressed according to the required operating point. The blowers are oil-free and thus suitable for various applications. The blowersÆ have both suction and discharge noise silencer. For pump curves, both in suction and compression, as well as additional information please contact us.

Technical Data:
Manufacturer's type:ELMO 2BH1943-1GC36
Year of manufacture:2002
Suction capacity with max vacuum:16,7 m3/min (50Hz)
Suction capacity with max discharge pressure:21,5 m3/min (50Hz)
Max pressure difference in vacuum operation:0,30 bar (50 Hz)
Max pressure difference in compression operation:0,35 bar (50 Hz)
Inverter:Danfors VTL 6000 HVAC
Blower's rotation speed2920 rpm / 50 Hz and 3520 rpm / 60 Hz
Electric motor (Siemens):50 Hz: 21.0 kW û 300/690V û 39.5 / 23.0 A
60 Hz: 24.2 kW û 460 V û 41.0 A
Protection class:IP 54.

The fan is made by German Pollrich Ventilatoren GmbH in year 2004 and it has been as a back-up emergency fan which has practically newer used and therefore the unit is new like condition. This fan was designed to blow explosive air/gas mixture (VOC) and therefore it fulfills category II 2G, temperature class 1 ATEX 95 norm of explosive proof design. The motor and fan are built on a common heavy duty frame and they are connected with a flexible coupling.

Technical data:
Manufacturer: Pollrich Ventilatoren GmbH
Year of manufacture: 2004
Fan type: VR50S11C1UK0900LG360MMUU
Manufacturing no: 123665
Volume: 10.55 m3/sec (37980 m3/h)
Max press difference: 8000 Pa (0.08 Bar)
Speed: 2980 RPM
Max gas temperature: 80 C
Power requirement: 104.6 kW
Electric motor: CEMP 132 kW / 2970 RPM
Type: AC70 315M 2
Classifications: II 2 G EEXd IIC T4 IP 55.

Compressors units (totally 4 pcs) are built by York Sabroe in 2002 and 2003 and they operate with R22 refrigerant. Two identical SAB 128 HF screw compressor units are built on a common base frame with an integrated horizontally mounted oil separators, oil circulation pumps and local operating panels. Common (for two compressors) plate type Freon / Glycol evaporator, internal glycol circulating pump and one large Freon buffer tank is also build on the same base frame. Delivery includes also evaporative condenser and LV / Control cabinet and external glycol circulating pump.

Above described 2 x SAB 128 HF packages we have two for sale, one made in year 2002 and the other year 2003. Both packages are still installed and can be tested in mutually agreed time. Units have been in operation approx 6 years and 5 years and they are in very good condition.

Technical data
Number of compressors - 4 pcs
Compressor type - SAB 128 HF
Refrigerant - R 22
Cooling capacity - 4 x 379 kW ( 0 /+40C)
Swept volume - 4 x 454 m3/h
Electric drives (compressor) 4 x 110 kW - 400/690 V 50Hz (also suitable for 60Hz)
Freon buffer tank -2 x 1650 liters
Plate evaporators - Alfa-Laval M10-BW FGR
Evaporative condensers - 2 x BAC VXC 116 Closed Circuit
Condenser fans - 1 x 17 kW and 1 x 4 kW for each
Condenser circulating pumps- 2 x Grundfors LP80 - 25/133
Glycol pumps - 2 x Grundfors LP 80 - 25/133
2 x Hilge Mahana 65-160

The boiler is a three-pass, fire-tube steam boiler made by Finnish Ahlström Themoflow in year 1990. The boiler has max operating pressure16 bar with 205 C steam temperature and it is equipped with exhaust gas economizer for preheating incoming feed-water and modulating heavy fuel oil burner. It's has a large 15.2 m3 water volume which allows big momentary changes in load. Other benefits include simple structure, long operating life, reliability and ease of service and maintenance. The boiler is in good operational condition. Feed water pumps and feed water tank with aerator are available for separate request and price.

Technical Data:
Manufacturer: Ahlström Thermoflow, Kaarina
Manufacturing year: 1990
Capacity: 3.3 MW
Water volume: 15.2 m3
Steam characteristics: Max 16 bar, at 205 C temperature, saturated
Oil Burner: Weishaupt Monarch RMS 50/2 A - ZM (YOC 1990)
Oil feeding: 140 - 490 kg/h.

Very little operated (ony 6000 hours totally!) fuel oil fired package boiler made by Högfors (nowadays Foster Wheeler) in 1988. Complete plant with combustion air fan and feed water pumps for immediate delivery, in very good condition.

Main scope of the delivery:
- Högfors 30 t/h boiler
- Oilon burner
- Economizer
- Combustion air fan
- 2 pcs of 90 kW / 25 bar KSB feed water pumps
- Fuel oil pumping unit made by Oilon
- 8 pcs of steam shoot blowers
- valves, fittings and maintenance supports .

Type of boiler Water tube type with natural circulation, with two drums
Manufacturer Kymin Osakeyhtiö, Högfors, Finland (Foster Wheeler)
Model of the boiler: H52-47-25 bar
Year of manufacturing 1980
Starting day of operation 16.11.1980
Evaporation 47 t/h saturated steam
Temperature of steam 226 oC
Effect 30 MW
Structural pressure 25 bar
Feed water temperature 120 oC

Furnace volume 74,5 m3
Surface of furnace c. 136 m2
Surface of convection part 420 m2
Surface of economizer c. 504 m2
Water volume 15,8 m3

Oil Heavy oil (POR 230)
Oil burner Saacke SKV, fully automatic, modulating
Regulating area of burner 610-3050 kg/h
Oil pumping- and pre- Oilon Osva 4000 kg/h
heating station
Feed water pumps 2 pcs + 1 pc as spare.
KSB-centrifugal pump MOVI 65/6,
massflow 59 t/h, 29,5 bar
motor 90 kW, 2900 r/min
Primary air fan Mercantile KDER 75, 37300 Nm3/h, motor 115 kW, 1500 r/min
Sootblowers Diamond Superior sootblowers 4 pcs in boiler part
Diamond Superior sootblowers 4 pcs in economizer.

Dimensions of boiler part: Height 5,2 m, Width c. 4,5 m, Length 10,0 m
Weight of boiler part c. 54 t. without water and accessories
Weight of economizer c. 15 t. without water and accessories
Boiler is suitable for gas operation by changing the burner.
The boiler has been in operation only about 6.000 hours.
Equipment for SaleGeneral Industry Textile Machinery Process Equipment Energy & Power
Gas & HFO Boilers Wind Turbines.

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, deep purple, to rusty red. The iron itself is usually found in the form of magnetite (Fe3O4), hematite (Fe2O3), goethite (FeO(OH)), limonite (FeO(OH).n(H2O)) or siderite (FeCO3). Hematite is also known as "natural ore". The name refers to the early years of mining, when certain hematite ores contained 66% iron and could be fed directly into iron making blast

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in colour from dark grey, bright yellow, or deep purple to rusty red. The iron itself is usually found in the form of magnetite, hematite, goethite, limonite or siderite. The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make steel. Steel is used to make automobiles, locomotives, ships, beams used in buildings, furniture, paper clips, tools, reinforcing rods for concrete, bicycles, and thousands of other item

GB Standard

U profile horizontal stud
Dimension(mm)
depth: 0.7, 0.7, 0.7,
width:100, 75, 50,
Wingwidth:404040
legnth:3000, 3000, 3000,
Simple packing specification
weight(kg/m):0.9670.8350.698

Common Gypsum Plasterboard
Technical parameters Standards(GB/T9775-1999)

Common Gypsum Plasterboard-specifications
dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):7.2,9.0,11.5,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):2.67,2.69,2.61,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.1,2.1.2.28

Fireproof Plasterboard technical parameters

Standards(GB/T9775-1999)

FireProof Gypsum Plasterboard-specifications
Dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):8.2,9.6,12.4,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):3.04,2.87,2.81,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.39,2.25.2.46

Waterproof Plasterboard technical parameters

Standards (GB/T9775-1999)

Water Proof Gypsum Plasterboard-specifications
Dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):8.3,9.7,12.6,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):3.08,2.90,2.86,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.42,2.27.2.50

GB standard&ISO

C profile vertical stud
Dimension(mm)
depth: 0.7, 0.7, 0.7,
width:98.5, 73.5, 48.5,
Wingwidth:505050
legnth:3000, 3000, 3000,
Simple packing specification
weight(kg/m):1.1981.0720.934