Find Verified Compressor Scrap Suppliers, Manufacturers and Wholesalers

Compressor single stage, standard speed oil-injected rotary screw compressor with manufactured by German company Drucklufttechnik GmbH in year 2002. The complete unit consists of intermediate pressure vessel and Ultratroc - air dryer all delivered same time as the compressor. The unit is controlled by modern DELCOS 3000 control unit. The total unit has 30320 operating hours, the unit has been regularly serviced by a compressor service company and is in good operational condition. The compressor is single-stage, double screw, V-belt driven electric motor drive compressor which has oil cooler and thermostat controlled water - air after cooler on discharge of the pressurized air. The operations were stopped in year 2006 but the compressor and other equipment are still installed and ready for test run.

Technical data:
Compressor type:CompAir L90 7,5A
Capacity:16.1 m3/min, 7.5 bar
Comp. electric motor:90 kW - 400/415 V û 50 Hz
Air cooler electric motor:3.0 kW - 400/415 V û 50 Hz
Compressor weight:2380 kg
Compressor dimensions:2.4 x 1.4 x 2.0 m (W x L x H)
Air dryer type:Ultratroc SD 1350 û type 422
Air dryer air volume:22.5 m3/min
Total power requirement of dryer:2.4 kW
DryerÆs refrigerant:Type R134 a û filling 3.5 kg
DryerÆs dimensions:1200x900x800 mm, weight 185 kg
Int. mediate air pressure vessel:Volume 2 m3, 10 bar, made by Galvanoimis Oy.

Compressors units (totally 4 pcs) are built by York Sabroe in 2002 and 2003 and they operate with R22 refrigerant. Two identical SAB 128 HF screw compressor units are built on a common base frame with an integrated horizontally mounted oil separators, oil circulation pumps and local operating panels. Common (for two compressors) plate type Freon / Glycol evaporator, internal glycol circulating pump and one large Freon buffer tank is also build on the same base frame. Delivery includes also evaporative condenser and LV / Control cabinet and external glycol circulating pump.

Above described 2 x SAB 128 HF packages we have two for sale, one made in year 2002 and the other year 2003. Both packages are still installed and can be tested in mutually agreed time. Units have been in operation approx 6 years and 5 years and they are in very good condition.

Technical data
Number of compressors - 4 pcs
Compressor type - SAB 128 HF
Refrigerant - R 22
Cooling capacity - 4 x 379 kW ( 0 /+40C)
Swept volume - 4 x 454 m3/h
Electric drives (compressor) 4 x 110 kW - 400/690 V 50Hz (also suitable for 60Hz)
Freon buffer tank -2 x 1650 liters
Plate evaporators - Alfa-Laval M10-BW FGR
Evaporative condensers - 2 x BAC VXC 116 Closed Circuit
Condenser fans - 1 x 17 kW and 1 x 4 kW for each
Condenser circulating pumps- 2 x Grundfors LP80 - 25/133
Glycol pumps - 2 x Grundfors LP 80 - 25/133
2 x Hilge Mahana 65-160

Clean alloy 7075. Ready now 22 mt. And 80-100 mt per month
We also have 2024 alloy, 120 mt and 100 mt regularly.
full details upon interest.

Metores Recycling
Helsinki
Mikael Keinonen

Rotary Lube Blower / Vacuum compressor KAESER EB 420 C û 38 m3/min, 53 kPa

There are two identical sets of oil-free, 2 lobe rotary blowers, made by Germand Kaeser Kompressoren GmbH in year 2005 with accessories. Manufactures type is Kaeser ED 420 Compact Omega Pluss 53 and accessories include a control cabinet with two inverters and programmable Kaeser Start Control STC 30 unit, totally 6 preliminary intake air filters and 3 final air intake filters with their steel supports. The rotary blower units have removable sound enclose for noise insulation. Operation of the equipment was stopped in year 2007, total running hours approx 7000 and therefore they are in excellent operational condition. In addition, we can offer you service maintenance by the manufacturer at separate cost.

This equipment is suitable for demanding dust collection and pneumatic transportation of various products due to oil free operation. For pneumatic transport application some changes in filters and other parts are needed.
The rotary lobe has two blower shafts with high efficiency Omega profile in a blower block. The rotary lobe and the block have a very small distance and they are not touching each other's and therefore there is no need for lubrication oil. The rotors are driven by high efficiency electric motor via belt connection and they both are installed on the same base frame. . The inlet and discharge silencers are designed to be effective at all frequencies and are eminently suited to variable speed . Higher rotational blower speeds produce high volumetric efficiencies, which in turn lower discharge temperatures and power consumption. The Compact Range ensures that all serviceable items are accessed from the front panels of enclosures.
The preliminary intake air filters are combination of cyclone and bag filter and it removes most of the dust from inlet air. Fine filter is a combination of cyclone and 138 ceramic fine filters which removes fine dust very effectively.

Technical Data
Manufacture's type: EB 420 Compact Omega plus 53
Manufactured in year: 2005
Suction capacity with max vacuum:38,0 m3/min
Power demand max: 40,3 kW
Rotor's rotation speed 4120 rpm
Max suction vacuum: 0,53 bar (abs.)
Discharge pressure: 1,0 bar (abs.)
Max pressure increase: 470 mbar
Temperature rise max -t: 82 K
Electric motor: 45 kW û 50 Hz / 400/690V û 83/48 A
Electric motor nominal speed:2965 rpm
Protection class: IP 55
Inverters: Mitsubishi FR-F740-01160-EC
Case ventilation fan: 370 W û 50 Hz / 230 / 400V
Weight blower with the case:1120 kg
Blower case main dimensions:1.8 x 1.7 x 1.8 m (K x L x S)
Noise level: 99 dB (A)
Noise level with the case: 84 dB (A).

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in colour from dark grey, bright yellow, or deep purple to rusty red. The iron itself is usually found in the form of magnetite, hematite, goethite, limonite or siderite.

The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make� steel.� Steel� is used to make automobiles, locomotives, ships, beams used in buildings, furniture, paper clips, tools, reinforcing rods for� concrete, bicycles, and thousands of other items.

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, deep purple, to rusty red. The iron itself is usually found in the form of magnetite (Fe3O4), hematite (Fe2O3), goethite (FeO(OH)), limonite (FeO(OH).n(H2O)) or siderite (FeCO3). Hematite is also known as "natural ore". The name refers to the early years of mining, when certain hematite ores contained 66% iron and could be fed directly into iron making blast

Iron Ore Pellets:
Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste.
The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more.

Product Type: IRON ORE PELLETS
Fe (T) 64 %
Si02 1.150 %
Fe0 0.75 Max
Ti02 0.021%
Al2O3 0.319 %
Ca0 1.170 %
P 0.032 %
S 0.031 %
V205 0.004 %
Cu 0.057 %
N2O 1.290 %
Mg0 0.069 %
CCS 309
Size 16-19 mm - 7 %
09-16 mm -91 %
06-09 mm 2 %
Tumbler Index- for above 6.3 mm 96.2 % -� 95 % min
Abrasion Index â??for 0.5 mm 3.8 % - � 4 % max
Sticking Index @950 deg C 20.1 %
Bulk Density 2.17 %
Compression Strength 270 Kg / Pellet � / � 150 kg / pellet
Fines below 5mm (-) 5 mm 3 % max
Reducibility index 55-65 %

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, deep purple, to rusty red. The iron itself is usually found in the form of magnetite (Fe3O4), hematite (Fe2O3), goethite (FeO(OH)), limonite (FeO(OH).n(H2O)) or siderite (FeCO3). Hematite is also known as "natural ore". The name refers to the early years of mining, when certain hematite ores contained 66% iron and could be fed directly into iron making blast

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in colour from dark grey, bright yellow, or deep purple to rusty red. The iron itself is usually found in the form of magnetite, hematite, goethite, limonite or siderite. The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make steel. Steel is used to make automobiles, locomotives, ships, beams used in buildings, furniture, paper clips, tools, reinforcing rods for concrete, bicycles, and thousands of other item

Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste.

The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more.

The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was installed in 2001 and it has nominal CO2 removal capacity of 1000 kg/h. The plant has Siemens S 7 control system where operation is carried our via a large 12 " color screen panel with Windows CE operating system. This is a complete CO2 recovery plant and final delivery scope depends on buyers needs. The plant has been in operation only approx 5 years and is still installed and in very good condition. The carbon dioxide plants was designed by Danish Union Engineering (www.union.dk ) and the delivery includes following main components:

- 1 Scrubber for gas flushing
- 2 Foam catcher vessels
- CO2 collection, inflammable
- 2 Mehrer TZW 70 CO2 compressors
- 2 Carbon filters
- 2 Dehydrators
- CO2 Liquefier
- CO2 Storage Tank
- 2 Cooling compressors GEA Grasso GD-3 for R717
- Air cooled condenser for NH2 compressors
- Alarm center for CO2 and NH3 concentration
- Station for 40 kg CO2 still tank filling
- CO2 pumping station from a truck to the factory
- CO2 purification tester
- Steam heated evaporator for liquid CO2

Detailed technical information available for serious buyers

The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit.

Operation principle:
Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency.

Technical data:
Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden
Type: ECO 5000 VS-HP, R407C
Year made: 2003
Evaporation capacity: 5000 liters / 24 hour (pure water)
Electricity consump.: about 0,15 kWh / liter pure wateri)
Control unit: Siemens Micromaster 420
Compressor: Bitzer Kuhlmachinenbau GmbH,
Compressor type: 6G-40,2
Compressor capacity: 126.8 m3/h, 19/28 bar
Refrigenerant: R 407 C
Main dimensions: 2.8 m x 1.3 m x 2.9 m
Weight: 1500 kg.

ELMO-G Blower - Vacuum pump 1000 m3/h

The blowers are made by German ELMO Vacuum Technology GmbH, a Siemens company in year 2002 and they are single stage, gas ring type. The vacuum pumps are in good operational condition. We have three identical pump units and originally the pumps were in dust suction operation and therefore the delivery includes 3 pcs high efficiency cyclone type dust filter with electric discharge vibrators. Motor speed is controlled with individual inverters. Units can be sold separately.

ELMO-G vacuum pumps can be used for suction operation or as compressors in pneumatic transportation system. They have side-channel principle using gas ring as a sealing and the gas flows through the compressor along a helical trajectory and is repeatedly accelerated and thereby repeatedly compressed according to the required operating point. The blowers are oil-free and thus suitable for various applications. The blowersÆ have both suction and discharge noise silencer. For pump curves, both in suction and compression, as well as additional information please contact us.

Technical Data:
Manufacturer's type:ELMO 2BH1943-1GC36
Year of manufacture:2002
Suction capacity with max vacuum:16,7 m3/min (50Hz)
Suction capacity with max discharge pressure:21,5 m3/min (50Hz)
Max pressure difference in vacuum operation:0,30 bar (50 Hz)
Max pressure difference in compression operation:0,35 bar (50 Hz)
Inverter:Danfors VTL 6000 HVAC
Blower's rotation speed2920 rpm / 50 Hz and 3520 rpm / 60 Hz
Electric motor (Siemens):50 Hz: 21.0 kW û 300/690V û 39.5 / 23.0 A
60 Hz: 24.2 kW û 460 V û 41.0 A
Protection class:IP 54.

1. Product: Cobalt cut cathode
2. Brand: ..... cobalt (given upon interest)
3. Quality: typical assay sent before
4. Quantity: mutually agreed up to 40MT/month, but if less required MOQ 10 mt/m can be agreed.
5. Packing: In original producer's sealed drum on pallets
6. Price: Metal Bulletin Low Grade Low Quotation Monthly Average (M) + 5%
7. Delivery: ex bonded warehouse
8. Payment: Conditional release by T/T payment
9. Shipment: from May to December, 2018

Cadmium-telluride 99,999 min
size to be agreed.

Name of product : Cobalt Concentrate 10-20% and Cobalt Hydroxide 24-26% and grade 8-10%.

Price of product : LME Cobalt x Co% x payable % on dry basis ex-warehouse Zambia. Exact payable % to be determined for quality required.

Product origin : Zambia

Key Specifications/Special Features

Harmonization System (HS) Code :

Minimum Order Size : 500 mt, but up to 2000 MT per month

Packaging details : Big bags

Tantalum Molybdenum, Titanium, Tungsten

We are providing the following metals in purities of 99,9-99,99 for over 10 years to European consumers and else where.

Tantalum
Molybdenum
Titanium in all grades
Niobium
Tungsten, or alloyed tungsten

Form : Round bars, sheets, wire, or based on customer drawings

Pure or alloyed.
Prices based on technical requirements and quantity.
Mill is ISO9001.

Do not hesitate to ask.