CV7-OEM Ultrasonic Wind Speed Sensor Description
CV7-OEM shows the same features as the CV7 standard: light, compact and low energy consumption.
With this OEM version of the Static Wind Transducer CV7, you can add an accurate Ultrasonic Wind Sensor to your own products and installations. It is powered by 8-30 VDC power supply and it outputs RS232/RS422/NMEA0183 signal.
CV7-OEM Ultrasonic Wind Speed Sensor Specification:
* Output rate: 2 Hz / 30 Hz measurement or *4 Hz / 60 Hz meas.
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5 degree
* Direction resolution: 1 degree
* Power supply: 8 V to 30 V DC
* Electrical consumption: 9 mA
* Op. temp. without icing: -15 degree C to +55 degree C
-
27817 Electronic Semi Conductor Devices Other Components Suppliers
Short on time? Let Electronic Semi Conductor Devices Other Components sellers contact you.
CV7-E Ultrasonic Wind Speed Sensor Description
The CV7-E is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The CV7-E is powered by 8-30 VDC power supply and it outputs RS232 / RS422 / 5 V level signal / NMEA0183.
The CV7-E shows a data rate twice faster than the CV7 and CV7-V with a data output 4 per second.
The small size of this sensor makes it very discreet.
Like every LCJ Capteurs products, CV7-E is energy efficient.
CV7-E has proved its value with universities â??laboratories, scientific and wind tunnels successful tests.
It can be used connected to a PC and to any system featuring a NMEA® input port.
CV7-E Ultrasonic Wind Speed Sensor Specification:
* Output rate: 4 Hz / 60 Hz measurement
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5 degree
* Direction resolution: 1 degree
* Power supply: 8 V to 30 V DC
* Electrical consumption: 9 mA
* Op. temp. without icing: -15 degree C to +50 degree C
SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Description
SONIC-ANEMO-SDI is made from the CV7-V to which a SDI12 protocol and optimizing electrical consumption has been added. Sample rate is 2 Hz.
This ultrasonic wind sensor operates in a request-response mode.
This product is more energy-efficient than standard units.
The SONIC-ANEMO-SDI is dedicated to meteorological applications.
SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Available data:
- Average speed and direction over 10 minutes
- Minimum wind speed and direction for that period
- Maximum wind speed (gust 3s) and direction for that period
- Software version and serial number
- Data measurement quality rate from the sensor
- Data for sensor diagnostic (manufacturer use only)
SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Specification:
* Output rate: 2 Hz / 30 Hz measurement
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5'
* Direction resolution: 1'
* Power supply: 2.7 V to 35 V DC
* Electrical consumption: 2.9 mA Avg. @ 12 V
* Op. temp. without icing: -15'C to +55'C
Y504-A Dissolved Oxygen Sensor Description
The sensor is based on optical fluorescence lifetime quenching technique. Its technical procedure meets ASTM D888-09 standard for optical sensing of dissolved oxygen. This online sensor is developed to integrate with Yosemite wireless monitoring system. Its rugged design and large measurement range make it ideal for sampling, flow cell, ground water and waste water measurements.
Y504-A Dissolved Oxygen Sensor Applications
Fish farmer, waste water plant, river, stream, and ocean monitoring
Y504-A Dissolved Oxygen Sensor Feature
* 0-20mg/L or 0-200% Saturation
* 0~50 'C; IP68 rating
* Membraneless, no electrodes design
* No oxygen consumption
* Flow Independent
* Automatic temperature compensation
* No H2S Interference
* Low Drift, fast response, and more accurate
* Low Maintenance, low operating cost
* Easy sensor cap replacement
* RS-485; MODBUS protocol compatible
Y511-A Turbidity Sensor Description
Automatic cleaning turbidity sensor is complied with ISO 7027 Turbidity Standard. The turbidity sensor can be deployed in-situ and provide very stable data over long period of usage, which helps to ensure the quality of your measurements.
Y511-A Turbidity Sensor Typical Applications
Water quality monitoring, waste water testing, process water and aquaculture monitoring.
Y511-A Turbidity Sensor Features
* 0.1~1000 NTU
* Accuracy
MB7040 I2CXL-MaxSonar-WR
High Performance Ultrasonic Precision Rangefinder
MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Description
Weather Resistant (IP67) Sensors, and Optional Chemical Resistance
The industrial outdoor I2CXL-MaxSonar-WR sensors have a robust PVC housing designed to meet IP67 water intrusion. The sensors provide short to long distance detection and ranging with a narrow beam pattern. The I2CXL-MaxSonar-WR outdoor ultrasonic sensors have high power output, noise rejection, auto calibration, and factory calibrated beam patterns.
In addition to the standard I2CXL-MaxSonar-WR, has developed the Fâ??Option for additional protection necessary in a few hazardous chemical environments. Extremely corrosive gases or liquids can degrade or compromise the operation of the sensing unit. As a result, we offer a more chemically inert seal which allows our sensors to operate in all but the harshest of chemical environments. In addition to the chemical resistance the sensor has improved performance in wet or dust environments.
MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Specifiations
* Resolution of 1 cm
* Up to 40Hz reading rate
* RoHS Compliant
* Operates from 3.0-5.5V
* IP67 rated, I2C interface ultrasonic sensor
* Maximum range of 765 cm (300 inches)
* Operational Temperature from -40'C to +70'C
MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Features and Benefits
* Low power consumption
* Narrow, controlled beam
* Easy to use interface
* Detects smaller objects
* Can be powered by many different types of power sources
MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Applications and Uses
* People detection
* Security
* Motion detection
* Useable with battery power
* Autonomous navigation
* Educational and hobby robotics
* Collision avoidance
Advantage:
1.Machine with self-checking function,the turret will automatically checking turret position right or not and calibrated automatically when tun-on machine.
2. Adopted 4.3 inch touch screen, new advanced design for operation interface
3. With HV&HKscale & hardness conversionfunction
4. Digital eyepiece with encoder, D1, D2 data no need manual input to machine, easy operation
5. USB interface, test result can be save to u-flash directly.6. Menu structure interface, all data can display on screen
6. One-time cast aluminum shell, structure more stable.
7.Car painting technology, looking more decent and bright.
8. Reserved optical path for add CCD cameraand connect with PC (optional function)
9. OK/NG judgement function
Application:
1.Widely used to test the hardness of all kinds of metal materials (steel, nonferrous metals, tinsel, cemented carbide, sheet metal, etc.)
2. surface layer / coating (Carburization, nitriding, decarburization layer, surface hardening layer, galvanized coating, etc.)
3. Glass, chip, ceramic, plastic and rubber, etc.
Specifications:
1.Hardness Scaleï¼?HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1
2.Test forceï¼?10, 25, 50, 100, 200, 300, 500, 1000gf
3.Loading:Automatic loading - dwell - unloading test force
4.Turret:Automatic turret
5.Magnification:10X Digital eyepiece; 10X, 40X Objective lens
Total magnification: 100X (observation), 400X (measuring)
6.Indenter:Standard Micro Vickers diamond indenter 136°±0.5°
7.Dwell time:1-99s (unit: 1 second)
8.Data storage:Yes, turn-off machine memory will automatic save
9.Data output:Built-in printer; U-flash (USB interface)
10.Data display:4.3 inch digital touch screen
11.X-Y table:Size: 100x100mm; Max. Move range: 25x25mm
12. Standards:GB/T4340, ASTM E384 & E92, EN-ISO 6507, JIS B-7734
Chinses manufacturer of G10-1GHT-035 is Ingke Technology(ingketech.net)
INGKE can provide 3D datasheet(STEP file)
INGKEâ??s RJ45 Magnetic are compatible with all leading silicon vendorsâ?? Phyâ??s.
Part No.:G10-1GHT-035
Chinese manufacturer: INGKE Technology
 Applications: 10G Base-T, AutoMDIX
 Mounting Type: 90° Angle (Right)/Through Hole
 LED Color: Green, Yellow - Green
 Shielding: Shielded, EMI Finger
 Tab Direction: Down
 Contact Finish: Gold 50µin
 Operating Temperature: 0°C ~ 70°C
As the market leader for 10G Base-T RJ45 Magjack,Ingke Technology can provide compatible 10G parts as below: G15-111T-038E,G15-111T-076C,JTL-U1001NL,JTL-U1003NL,JTL-U1002NL,JT6-1480NL,JT3-1101HL,JT6-1473NL,
JT7-1104NL,JT7-1115NL,JT7-1119NL,
Manufacturer: Ingke Technology Co.,Ltd
Our service:
1).Free sample is available!
2).OEM & ODM orders are welcomed.
3).We offer after-sale service for 8 years.
Our Advantage:
1).OEM factory for RJ45 Connector more than 10 years.
2).Cost reduction, lead time within 1 week, FREE samples.
3).After sales services 24*7 to help you solve any kind of problems
CV7-V Ultrasonic Wind Speed Sensor Description
The CV7 is easily integrated into measurement and monitoring systems. The CV7-V is powered by 8-30 VDC power supply and it outputs RS232/RS422 (5V level signal) / NMEA0183.
CV7-V Ultrasonic Wind Speed Sensor Application
Static wind sensor
A conventional wind vane/anemometer features mechanical rotating parts. These moving parts expose the sensor to failure.
CV7 series was extensively tested in Marine applications for both precision and robustness.
Configurable wind sensor
CV7-V can be programmed and configured for : angle correction, smoothing time constant, units of measurement and interface format.
CV7-V connexion
CV7-V can be used connected to a PC and any systems featuring an NMEA® input port and specific pieces of equipment using conventional formats.
In PC mode, this bidirectional sensor can be set up for angle correction, damping, measure units and interface format.
Quality
All LCJ Capteurs are designed and manufactured in the Nantes region in France where they are fully tested throughout the manufacturing process.
CV7-V Ultrasonic Wind Speed Sensor Specification:
Output data format: NMEA0183; MWV, XDR
Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility
Output rate: 2 Hz / 30 Hz measurement
Wind module sensitivity: 0.12 m/s
Wind module resolution: 0.05 m/s
Wind module dynamic: 0.12 to 40 m/s
Direction sensitivity: +/-1.5 degree
Direction resolution: 1 degree
Power supply: 8 V to 30 V DC
Electrical consumption: 9 mA
Op. temp. without icing: -15 degree C to +55 degree C
Cable: 25 m / 4x0.22 mm2
Connection: 4 wires
Weight of the head: 100 gr
Weight of unit assembly: 200 gr with mounting part
Mounting: Vertical ; 300 aluminium arm, 16 mm
SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Description:
As a result of its very special electronic architecture the SONIC-ANEMO-MICRO shows a very low electrical consumption. It is ideal for remote stations or mobile installation.
SONIC-ANEMO-MICRO is an OEM sensor designed for integration in other original Equipment.
This sensor shows a very low consumption. It operates from 300µA.
SONIC-ANEMO-MICRO is the lowest consumption power solution of all LCJ sensors.
SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Specification:
Output data format: ASCII format, avaibility
Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility
Output rate: select. 1 meas. and Tx: every 1,6 or 18 s
Wind module sensitivity: 0.12 m/s
Wind module resolution: 0.05 m/s
Wind module dynamic: 0.12 to 40 m/s
Direction sensitivity: +/-1.5 degree
Direction resolution: 1 degree
Power supply: 3 V to 3.6 V DC
Electrical consumption: 200µA avg
Op. temp. without icing: -15 degree C to +50 degree C
Cable: 50 cm / 4x0.22 mm2
Connection: 4 wires
Weight of the head: 100 gr
Weight of unit assembly: N/A
Mounting: N/A
MB1444 USB-ProxSonar-EZ4
High performance USB ultrasonic proximity detection sensor
MB1444 High Performance USB Ultrasonic Sensor Product Description
The USB-ProxSonar-EZ4 has a detection zone of ~1 feet and will allow for 15+ simultaneous sensors.
These ultrasonic proximity sensors detect objects in a calibrated detection zone. The USB-ProxSonar-EZ sensors report when an object (such as a person) enters the detection zone. The target is released after leaving the USB-ProxSonar-EZ detection zone.
MB1444 High Performance USB Ultrasonic Sensor Product Specifications
* USB interface
* ~2.5 second target acquire time*
* ~1.5 second target release time*
* Automatic multi-sensor operation
* People sensor
* Resolution of 1 inch
* Maximum Range of 125 inches (318 cm)
* Detection zone range of 12 inches (30 cm)
* 42kHz Ultrasonic sensor measures distance to objects
* RoHS compliant
* Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches
* Small, light weight module
* Designed for easy integration into your project or product
* Short range detection
Specifications:
1adopts the iternational most advanced plc control technology.
2.It can perform the forward and backward winding and counting operation,
Power failure protection, wire disconnection protection, stop brake, setup
Of winding position, location and fault prompt.
3.It can set the procedures and display the operation state through the
Touch panel.
4.It,s english interface can properly display the wire diameter, rotatin
Speed, number of turns and nunber of layers.
5.Its main sharft control adopts the frequencyconversion stepless speed
Adjustment, with the characteristics of short driving chain, large driving
Torque, wide speed adjustment range, low noise.
6.It,s speed control has two modes, automatic setup and foot switch speed
Adjustment.
7.It,s wire arranging operation is finished by the stepping motor and
Highprecision ballspline, the control precision can reach as high as 0.001mm.
8.The counting operation adopts the lighgrid rotary encoder, the output
Rotation speed and angle signal are traced with the data.
9.The tension controller employs the west germany damping device, so as to
The wire easy disconnection or coul loosing and dropping for the gension
Unbalance and easy fluctuation.
Features:
Simple operation
Low noisy
Reliable system operation
Complete function
Wide application range
Compact structure
High winding precision
Long life service
Yr260j/360j can adjust the processing range with the iron core and framework size.
Through changing the different clapm.It can wind the coils of various
Casting pts, it's necessary winding equipment for producin gthe pts with
Rshaped enclosed iron core, also the preferred electric engineering
Equipment in the pt industy.
27817 Electronic Semi Conductor Devices Other Components Suppliers
Short on time? Let Electronic Semi Conductor Devices Other Components sellers contact you.
