Housed in a polypropylene body and electronics are fully potted, ideal for long-term deployment in porous media, including acidic environments (mine tailings). Two head options are available: a diffusion head that creates a small air pocket for measurement in porous media and a flow-through head with two adapters for tubing that allows measurement of gas flowing in lines.
Apogee Instruments PAR meters are the tool of choice for cost-effective, scientific-grade measurement of underwater PAR levels. Accurate tank PAR mapping, daily light integral measurements, and the adjusting of photosynthetic radiation levels to mimic nature are all critical to specimen health. Apogee offers three different underwater calibrated meters at three different price points. The basic MQ-210X features our original X detector that is excellent for broadband light sources. The research-grade MQ-510 features an improved detector excellent for all light sources, including LEDs, and matches LI-COR and Kipp & Zonen PAR sensors in accuracy while costing much less. The cutting-edge MQ-650 measures the newly confirmed far-red extended (ePAR) photosynthetic wavelengths (400-750 nm).
Sensors are available with multiple detectors mounted along the length of a rugged anodized aluminum bar, which provide spatially averaged PPFD measurements along the length of the bar.
Residential Diaphragm Gas Meter
ITRON (MID approved)
Steel Version
Basic Features
3 Compact size: 1.2 dm cyclic volume
Range: G1.6, G2.5, G4
EN 1359 & O.I.M.L compliance
Design
Long -term accuracy & safety
Ready for remote reading & data management
Quality
World-class, ISO9001 certified, European Engineering and
Manufacturing
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
Prepaid Gas Meter
Sensus Meters
satndars
287 Electronic Meters Suppliers
Short on time? Let Electronic Meters sellers contact you.
1) Constant Current Selected automatically depending on
ground conditions
Max. Current 500mA
Min. Current 1mA
2) Voltage (Max) 500 V (1000 Vpp)
3) Power 40W
b. Amplifier
Voltage Measurement
Input Impedance 10 M Ohm
Input Range 0-200V
Precision + 0.05 mV
Noise Rejection 95 dB at 50-60 Hz
c. Resistance Measurement
Apparent R Range m Ohm, Ohm, K Ohm
Apparent R Precision 0.02 m Ohm at 500 mA
d. System Data
Cycle time 12 seconds
Accuracy 2%
Diagnostic display 9 codes
Temp. Range 0 v 50 degree c
e. Power Source 12 Volt, 12 Ah Rechargeable Battery
Measuring capacity 2000 readings at 20 mA
200 readings at 500 mA
f. Weight 12.5 Kg
g. Dimensions L 400mm X W 225mm X H 330mm
Weight 20 kg of instrument Additional Accessaries 60-80 Kg.
Prepaid meters are now, The government is also taking initiative and making policies to make it happen. Commercial establishments like offices, retail, industrial, multifamily, malls, complexes can install prepaid meters. With Adwards Intellitech Pvt Ltd you don't have to bargain, we provide Low cost prepaid meters for all commercial establishments. Our prepaid meter is flexible in adapting to the ever-changing requirements and conditions.
Flowmeter
We are a leading name in this domain engaged in manufacturing and supplying a broad array of Flow Meter. These are fabricated using finest grade material and innovative technology, our products are acknowledged for their sturdy construction, convenient operation, easy maintenance and elongated service life. Our components for the product are procured from some of the most reliable vendors so as to provide our clients with best-in-class-products.
Electromagnetic FlowmeterWe are manufacturing, exporting and supplying a comprehensive range of Electro Magnetic Flow Meter or Electromagnetic Flowmeter, which is used for electrical measurement of flow rate. The performance of the instrument is not affected by the properties of the material such as corrosiveness, viscosity, density, acidity and alkalinity.
Description :
Flow Star series FEMAG are micro-controller based full bore type electromagnetic flow transmitter specially used for various industrial applications
These flow transmitters accurately measures the flow rate of conductive liquids & slurries in closed pipes
Due to simple & rigid design the flow transmitter is an obstruction less & maintenance free instrument in place of conventional mechanical flow measuring device
The use of 'Pulsed DC' technology offers highest ability & better measuring accuracy in the form of electrical signal 4 - 20 ma DC linearly proportional to volumetric flow
The instrument is based on Faraday's law of electro-magnetic induction. A magnetic field is generated by the instrument in the flow tube The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring voltage
Salient Features :
Indication through LED / LCD
Full Bore type
Microprocessor based
Simple & cost effective construction
Provides wide flow ranges
Outstanding accuracy
Operates over wide ranges of temperature & pressure
Easy maintenance as no moving parts
Pulsed DC coil excitation
Flame-proof, IP-65, IIA, IIB CMRI certified housing
This instrument adopts the pulse xenon lamp as light source and the ultraviolet optical fiber spectrometer as detector is capable for real-time gathering of absorption spectrum of water pollutants ranging from 200nm to 800nm and real-time analysis of the content of water pollutants by means of chemometric algorithm technology. Optical path as shown below.For more information.
Vasthi uses heated probe to collect the sample from the sample line, it will maintain constant temperature and removes the dust and mist from the sample gas. This gas sample passes through electrically heated tube to cooler. It will remove the vapour content and cools the gas sample to 5áµ?c dew point range and this sample gas goes through the filter that eliminates the dust particle remaining and finally sensor senses and gives the exact readings in syngas analyzer.
Digital Grain Moisture Meter
Model : GA-271
Range : 3.5 to 40%
Accuracy :±0.2%
Display : Three Seven Segment FND
Principle : Resistance Measurement
Power : Six 9v Dry Cells or 230 Volts 50 Hz AC through Adaptor
Temperature : Automatic
Size : 300x170x260 mm. approx.
Weight : 9.5 Kg approx. without accessories.
1. Detects pH levels and Inform to clients using SMS Message, Missed Calls
2. Threshold Levels can be set through APP Control
3. TCP/IP Protocal Transfer to Server support can be configured
4. IoT support through MQTT protocal is supported
5. GSM (SIM Card) alert management/ SMS Control/ SMS Alert Control/ Missed Call Feature Support
