The threaded rods are steel rods designed to be in full tension state. They are mainly used in suspended ceiling applications. They connect suspended metal profiles (C-channel, furring channel) to the soffit ceiling by using the appropriate drop in Anchor.
Advantages:
Ceiling System
Gframe Nogging Track is manufactured to support the Gframe C-Stud and prevent its twisting. It is used in drywall partitioning and lining.
Applications:
Partition System
Lining System
Dimensions:
40
50
64
70
75
92
100
125
150
Gframe Perimeter L-angle is manufactured and roll formed in 3m strips with varying flange dimensions and gauges.
Applications:
Partition System
Lining System
Ceiling System
Facade
Dimensions:
25x25
Gframe Shadow Gap is a metal frame installed around the perimeter of the gypsum suspended ceiling or door frames, providing an architectural design effect. It provides a trimmed ceiling effect on the edges.
Applications:
Ceiling System
Dimensions:
20x30x15x30
20x20x20x13
20x10x13x20
Gframe Tee-Grid suspension system consists of Main Tee and Cross Tee profiles, combined in an interlocking manner forming an exposed grid. The T-grid framing system is made to support our Gtiles and Ctiles. The cross tees form the secondary frame of the system.
Applications:
Ceiling System
Dimensions:
15
24
25 Steel Casting Suppliers
Short on time? Let Steel Casting sellers contact you.
Gframe C-stud is manufactured and roll formed in 3m up to 8m strips with varying widths and gauges to support the structure.
Applications:
Partition System
Lining System
Faade
Dimensions:
42
50
64
70
75
92
100
125
150
Gframe Curved Track is manufactured to support the Gframe C-Stud and it is used for curved drywall partitions.
Applications:
Partition System
Lining System
Ceiling System
Dimensions:
50
64
75
92
150
Gframe Head Deflection Track is manufactured to support the Gframe Wall C-Stud from its top and prevent deflection. In addition, it provides enhanced sound insulation and fire performance. It is used in drywall and dry lining.
Applications:
Partition System
Lining System
Dimensions:
42
50
64
70
75
92
100
125
150
Gframe Fixing Channel is used as a horizontal member in drywall partitions, and it provides support for the Gframe wall C-Stud. It is used in partition walls and dry lining.
Applications:
Partition System Lining System
Dimensions:
72
150
Gframe Flat Strip is supplied in rolls weighing around 100Kg. The length is cut according to design requirements. It used in partitions of heights above 3.5m.
Applications:
Partition System
Lining System
Specifications:
Thickness
Unit:
mm
Value:
0.55 / 0.6 / 0.7 / 0.8 / 0.9 / 1.00 / 1.2 / 1.5
Standards:
ASTM C1396
Gframe furring channel is roll formed in 3m strips. Widths and gauges vary according to requirements.
Applications:
Partition System
Lining System
Ceiling System
Facade System
Dimensions:
69
Gframe J-Track is manufactured and roll formed in 3m up to 5m strips with varying widths and gauges to match the stud dimensions.
Applications:
Lining System
Shaft Wall System
Dimensions:
64
100
150
Gframe Tee-Grid suspension system consists of Main Tee and Cross Tee profiles, combined in an interlocking manner forming an exposed grid. The T-grid framing system is made to support our Gtiles and Ctiles. The main tees form the primary frame known as the main beams.
Applications:
Ceiling System
Dimensions:
15
24
Gframe Silent Stud is a vertical member of the partition system used to increase the acoustic performance. The unique design of the Silent Stud allows for higher and cost-effective sound insulation solutions. It is used in drywall partitioning.
Applications:
Partition system
Lining System
Dimensions:
92
Gframe Track is manufactured, and roll formed in 3 m up to 5 m strips with varying widths and gauges to match the appropriate studs.
Applications:
Partition System
Lining System
Faade
Dimensions:
42
50
64
70
75
92
100
125
150
Gframe W-angle is manufactured and roll formed in 3 m strips and used in suspsended ceiling applications.
Applications:
Ceiling System
Dimensions:
20x20
24x24
Castrock Advanced is a multicasting white plaster consisting of high purity natural gypsum with CaSO4 H2O as its main component. It is used as a protective or decorative coating of walls and for molding and casting works, mainly ceramic, sanitary ware, and tableware. Castrock. Advanced holds the same features as Castrock including low expansion, low porosity, excellent strength, and hardness but with a faster setting time. It is used for all kinds of ornamental plasterwork.
Advantages:
Ideal for ornamental plasterwork, molding and casting, and ceramic work
Easy to use with a fast setting time.
Standards:
ASTM C59/59 M
BS EN 13279-1
Iso 90001 :2015
ASTM C472/471
GULF Gypsum is suitable for surfaces finishings and decorative elements, with a moderate setting time. It is made of fine white gypsum, consisting essentially of calcined gypsum CaSO4.2H2O
Advantages:
Compressive strength suitable for casting
Suitable for building finishing purposes.
Edge Types:
White powder
40 kg paper bag
Standards:
ASTM C59/59 M
BS EN 13279-1
Iso 90001 :2015
ASTM C 471
ASTM C 472
Castrock is a multicasting plaster consisting of high purity natural gypsum. CaSO4 H2O is the main component of the Castrock powder; It is used for molding works, mainly for ceramic and sanitary and tableware. Castrockâ?¢ is a multicasting plaster applied for sanitary ware and in molding & casting due to its low expansion, excellent strength, and hardness. It is used for all kinds of ornamental plasterwork.
Advantages:
Castrock is a multicasting plaster with low porosity
It is used for molding and for decorative purposes.
Standards:
ASTM C59/59 M
BS EN 13279-1
Iso 90001 :2015
Iso 90001 :2015; ASTM C472/471
Wafer head screws are self-drilling steel screws used for metal-to-metal fixation. They are used to fix the metal frames of the drywall systems.
Advantages:
Partition System
Lining System
Ceiling System
25 Steel Casting Suppliers
Short on time? Let Steel Casting sellers contact you.
