Waterproofing material, app membrane, sbs membrane, building material, bitumen membrane, asphalt membrane , water based bitumen emulsion , water base and solvent base primer , oxidized bitumen.
Purpose:
Resists oxidation,
- UV Rays and Ozone resists many corrosive chemicals
- Has an Excellent operating temperature range of (-45) �°C to 120 �°C.
- Dust-Proof, Sound-Proof, Wind-Proof.
- Reducing the chances of air and water entering the building. They are highly resistant to water, ozone and ageing which makes them an ideal solution for external applications.
Application:
Used for roofing sheets,
- Weather strips window spacers,
- Oil seals Electrical insulations and stinger covers.
Dimensions:
Width: 150mm X1500mm Length: Up to 30 m.
Thickness: 1.5 mm
Color: Black
Features:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads.
- Does not react to weather conditions.
- It has no negative effect on children if directly touched.
- Easy to install over a concrete base area.
- Springy and comfortable underfoot.
- Its interlocking design can installed without adhesive in mild traffic areas, has good
stability and can be expanded indefinitely and covering large areas.
Application:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads.
- Does not react to weather condiotins.
- It has no negative effect on children if directly touched.
- Easy to install over a concrete base area.
- Springy and comfortable underfoot.
- Its interlocking design can installed without adhesive in mild traffic areas, has good
stability and can be expanded indefinitely and covering large areas.
- Entryways kidsâ?? area, Walks and Driveways.
- Horse barn, corridors, wash bays saddling areas, paddock areas, path.
- Balcony, courtyard, platform bridge, patio, garage, home use.
- Gym, fitness center, sport center, stud-farm.
Material:
- Top layer from 7mm colored SBR + 20 % EPDM granules
- Bottom layer from 18mm black SBR.
Color:
- Bottom layer Black color.
- Top layer Red & Green & Blue and Grey color.
Life span: - 5:10 years - according to the use.
Dimensions:
- 650mm * 1000mm
- Thickness of Rubber: 6mm
Description :
It consists of -2layers a bottom layer from rubber and a
top layer from textile and putting a disinfectant to freak
the leg before entering any place to protect from germs
Purpose:
Disinfectant Mat to protect homes,
hospitals and companies from germs,
viruses and bacteria
Materials:
Bottom layer from natural and SBR rubber
mix, top layer from Absorbing textile.
Physical Specification:
Hardness: 5 �± 40
- Tensile: 3.5 N/mm2
- Elongation: %300
- Color: Black
Applications: Homes, Hospitals and companies entrance.
Specification:
Water resistant, UV resistant and Heat tolerance is 70.
- Lightweight and durable.
- Fixed color â?? not dissolvable in water
- Available in many colors ( Blue â?? grey â?? Red )
Application:
- This rubber is used in the upper layer for paving playgrounds and other floorings
- Kids Flooring.
Storage: Store in dry conditions and keep away from any sources of heat and ignition.
Material: SBR
Relative density : 02. 0 �± 1.14 gm/cm�³
- Manufactured from durable EPDM rubber.
- High UV & Ozone resistant
- Fast & easy installation.
- Maintenance Free
- Provides a permanent seal for any type of construction
- Allows exerting a continuous and uniform force against the joint walls.
Applications:
- Bridges
- Parapets
- Cark parks
- Buildings
- Tunnels
- Water treatment plants.
Dimensions:
- Width*Length: 11cm * 3.2m
: 8cm * 3.2m
- Thickness: 2cm
Description:
To prevent low of water past a closed gate, seals are provided either on the gate or on the
metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich.
Dimensions:
Width*Length: 15cm * 13m
: 2.5cm * 13m
- Thickness: 1 cm
Description:
To prevent flow of water past a closed gate, seals are provided either on the gate or on
the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich.
Dimensions:
- Width*Length: 20cm * 12m
- Thickness: 1 cm
Description:
- To prevent flow of water past a closed gate, seals are provided either on the gate or on
the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich
Dimensions:
Width: Up to 1500mm
Length: Up to 50 m.
Thickness: 1.5 - 50 mm.
General Description:
EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance.
Features:
Chloramine resistant
Good heat and compression resistance.
Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid).
Resistant for air conditions.
Applications:
Automotive: Weather stripping and seals.
Wire and cable harnesses.
Window spacers.
Hydraulic brake systems.
Door, window and trunk seals
Roofing: Roof membrane.
Roof coating.
RV roof.
Industrial: Water system O-rings and hoses.
Tubing, grommets, and belts.
Electrical insulations and stinger covers.
This rubber is certified by FIFA.
- Water resistant, UV resistant and Heat tolerance is 70.
- Lightweight and durable.
- This rubber is recommended for use in Roofing or Road Flooring.
- sport Flooring,
- Automotive industry, construction and Geotechnical/Asphalt Applications
Material: automotive and truck scrap tire
Relative density @ 15 : 02. 0 �± 1.14 gm/cm�³
Color: Black
Dimensions:
- Width*Length: 36cm * 107cm
- Height: 5 cm
Purpose:
- Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron.
Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can
slide freely along the angle iron to meet the expansion deformation of main grid.
- Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion
joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear
deformation in the telescopic channel helps the whole device to realize telescopic motion.
Features :
- Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and
have a long service life.
- Wear resistance, corrosion resistance.
- Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians.
- During installation, bolt holes on the bottom and each junction are filled with adhesion
agent which makes the whole rubber bridge expansion joints be highly water-resistant.
- Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise.
Material: Rubber & Steel Plates.
Applications:
- Rubber bridge expansion joint is used in expressway.
- Rubber Bridge expansion installed in the end of bridge.
- Rubber bridge expansion joint is used flyover.
- Rubber bridge expansion joint is used in connection of bridge
Size:
- Length*Width: 150*150 cm.
- Thickness: 12mm
Advantage of this Tille:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads, sound absorbent.
Indoor flooring:
- Does not react to weather conditions.
- It has no negative effect on children if directly touched according to our customer feedbacks.
- Endurance is more than 2 tons per square meter.
Color: Black.
Applications:
- It is used in sport halls and locations that need Shock absorbers and safety flooring.
- It is used in kidsâ?? areas and schools.
Material: SBR Rubber mixed with PU Binder
Life span: 5:10 years - according to the use
39 Home Water Buckets Suppliers
Short on time? Let Home Water Buckets sellers contact you.
