Our pellets are ENplus certified. In terms of abrasion, ash content, fine particles, and heating value, they exceed the minimum requirements of the quality standard. The standard values are intended to ensure high product quality, good heating performance, and a stove-friendly combustion. This way, you can heat energy-efficiently because your stove runs smoothly and you need fewer pellets.
The ENplus values in detail:
Lower heating value over 4.8 kWh/kg
This is the most important value for you, as the higher the lower heating value, the greater the maximum usable amount of heat generated during combustion. The wood pellets we offer have a lower heating value of over 4.8 kWh/kg â?? the ENplus standard requires 4.6 kWh/kg. This value is important because only the lower heating value measures the actual energy content of your pellets! Many manufacturers and retailers indicate the upper heating value on the packaging, which is always higher than the lower heating value but does not provide any information about the actual energy content of the pellets during combustion.
Abrasion under 0.6%
The ENplus standard for abrasion is 2%, which corresponds to a mechanical strength of 98%. This means: The lower the abrasion, the more stable the pellets. Our offered pellets have an abrasion of 0.6% and a mechanical strength of 99.4%, which is significantly better than the standard. This means that less dust and fine particles are produced during combustion.
Ash content less than 0.4%
ENplus certified pellets may have an ash content of 0.7%. This refers to the amount of ash that remains after combustion. The ash content of the offered wood pellets is a maximum of 0.4%, making it particularly low and gentle on your stove.
Almost dust-free with a fine particle content of 0.05%
The bagged product is almost dust-free because it has only a fine particle content of 0.05%. This is well below the ENplus standard upper limit of 0.5%. Fine particles are defined as pellets smaller than 3.15 mm. If this proportion is too high, deposits can form in the stove, affecting heating quality.
Optimal moisture content
The pellets from Dorr Biomass Farm have a moisture content of 6.9 to 7.1%. This is optimal because a higher moisture content reduces the heating value of the pellets during combustion and produces more soot. The ENplus standard therefore allows a maximum of 10%. If the moisture content is too low, pellets burn too quickly and do not heat efficiently.
Diesel D2 is a refined petroleum product used for industrial and transport use.
It meets GOST 305-82 specifications and is known for high combustion efficiency.
Commonly exported from Russia or Kazakhstan in tanker vessels.
Key Specifications:
- Density at 15C: 0.840 to 0.860 kg/m3
- Sulfur Content: Max 0.2 percent
- Flash Point: Min 66C
- Color: Clear and bright
- No visible water or sediment
- Origin: Russia / Kazakhstan
- Packaging: Bulk in tanker vessel
- Minimum Order Quantity: 50000 MT
- HS Code: 2710.19
Mazut M100 is a heavy fuel oil used in large industrial heating systems and power plants.
It complies with GOST 10585-99 specifications and is typically exported from Russia in bulk via tanker vessel.
It is a residue fuel with high viscosity and sulfur content, suitable for large-scale boilers.
Key Specifications:
- Density at 20C: 0.960 to 1.010 kg/m3
- Sulfur Content: 1.5 to 3.5 percent
- Flash Point: Min 110C
- Ash Content: Max 0.14 percent
- Water Content: Max 1.0 percent
- Vanadium: Max 100 ppm
- Origin: Russia / Kazakhstan
- Packaging: Bulk in tanker vessel
- Minimum Order Quantity: 50000 MT
- HS Code: 2710.19
Jet Fuel JP54 is a kerosene-based aviation fuel used in commercial and military aircraft.
It complies with Colonial Grade 54 specifications and is exported from Russia or Kazakhstan.
Known for high purity and excellent thermal stability, it is shipped in bulk via tanker vessels.
Key Specifications:
- Density at 15C: 0.775 to 0.840 kg/m3
- Flash Point: Min 38C
- Sulfur Content: Max 0.3 percent
- Smoke Point: Min 25 mm
- Freezing Point: Max -47C
- Origin: Russia / Kazakhstan
- Packaging: Bulk in tanker vessel
- Minimum Order Quantity: 50000 MT
- HS Code: 2710.12
EN590 Diesel (10 ppm) is a high-grade automotive diesel fuel designed for modern engines.
It meets EN590:2013 specifications and complies with European emission standards.
With ultra-low sulfur content (10 ppm), it helps reduce emissions and engine wear.
The product is commonly exported in bulk from Russia or Kazakhstan by tanker vessel.
Key Specifications:
- Density at 15C: 0.820 to 0.845 kg/m3
- Sulfur Content: Max 10 ppm
- Cetane Number: Min 51
- Flash Point: Min 56C
- Pour Point: Max -15C
- Water Content: Max 200 mg/kg
- Origin: Russia / Kazakhstan
- Packaging: Bulk in tanker vessel
- Minimum Order Quantity: 50000 MT
- HS Code: 2710.20
22 Packaging Tapes Suppliers
Short on time? Let Packaging Tapes sellers contact you.
We are located in Croatia and we have a stock of 4 000 000 3ply masks with extra soft ear-loop and the edge of the mask what provides better comfort when using for a longer time at once.
Masks are certified and they are high quality. (CE, ISO, FDA, RICOTEST)
3ply masks come in packages of 50 pieces and we can offer you unique price of 0.32 - 0,39USD per mask depending on the quantity. Transport to most countries of EU is included in price. If you are located outside EU we are able to cover some of the shipping costs.
On stock we also have 10 000 KN95 face masks.
If you are interested or you have some question feel free to contact me.
Available sizes: M L1 L2 XL
Certificates: GlobalG.A.P VeeMee
Packaging options: Possibility to agree on packaging of different types according to specific requirements
Minimum order quantity: For plastic packaging, MOQ is 21 pallets (22,450 kg)
For packing in cardboard, MOQ is 17 pallets (560 kg per pallet)
Net price per unit/pack: We are open to negotiations in order to tailor a pricing structure that meets your needs
Availability: From mid-August to the end of April
22 Packaging Tapes Suppliers
Short on time? Let Packaging Tapes sellers contact you.
