The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
Scunoe video digital fiber converter transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet /telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in alications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation , which is suitable for different working environment .
Product characteristics
1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with ntsc, pal, and secam cctv camera systems and support rs-232, rs-422, and rs-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible pal, ntsc and secam video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range , no electrical or optical adjustments required .
8. Special asic design .
9. Industry-grade of operating temperature from -10 to 75 , which is alied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19í»í» 2u or 4u rack-mount chassis.
Operating voltage: dc5v (we will offer external ower suly from ac96-240v to dc5v for each unit)
Operating temperature: -10 to +75
Storing temperature: -55 to +85
Humidity: 0 to 95% non-condensing
Application :
Intelligent transportation system
Connection of sub-network for surveillance center
Public security surveillance
High way & toll station surveillance
Industrial closed circuit television surveillance
The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
This hdmi audio switch has many features that enable it to perform in a superior manner. Among those features you will find:
1.One input port on the front panel is specialized for portable devices
2.Support digital audio output simultaneously : stereo, toslink and coax
3.Support hdmi1.3b
4.Support highest video resolution 1080p.
5.Support 225mhz/2.25gbps per channel (6.75gbps all channel) bandwidth.
6.Support 12bit per channel (36bit all channel) deep color.
7.Support hdcp.
8.Support uncompressed audio such as lpcm.
9.Support compressed audio such as dts digital, dolby digital.
Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125
Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)
Brief introduction:
The Product provides customer with the most cost-effective solution for transmission with 1 channel uncompressed digital l video and 2 RS485 data over one single fiber cable. It is an easy installation and adjustment free device while providing high quality, real-time video
Features:
Industry-level design, SMT Assembly
Proprietary IC Core
PAL/NTSC/SECAM Compatible
Free From In-field Adjustment
Protection against lightening strike and surge
19' 3U Rack Mount Chassis Option
Application:
Intelligent Transportation System
Public Security Surveillance
Industrial Closed Circuit Television Surveillance
Intelligent Building
Specifications:
Video
Bandwidth: 6.5MHz
Quantization: 10bit
DG: 1%
DP: 0.7íptyp
SNR: 71 dB
Data:
Interface Type: RS-232/485/422, Manchesterú¼Biphase
Operation Mode: Full-duplex/Half-duplex
Data Rate: 0~300Kbps
BER: <10-9
Power supply:
Input AC110---240V
Output DC5V2A
Power 3.8W
Physical dimensions: 13 x 152.8 x 49.5mm
Weight: 120g
Environment:
Operation temperatureú¦-40oC ~ +85oC
Storage temperatureú¦-40oC ~ +85oC
Humidity: 5%--95% Non-Condensing
Transmission rangeú¦
Single-modeú¦ 20/40/60/80/100 Km
Multi-modeú¦ 2Km
This is an intelligent hdmi 5x1 amplifier switcher. It allows five hdmi source devices switched into one hd monitor or projector. Adopted touch button design let you enjoy the high technology and easy switching life. Quite differ with other switchers, this intelligent switcher has one input port on the front panel. This not only reduced the switcher to an ideal small size but also be more convenient for users to connect the source devices.
Features
This hdmi amplifier switcher has many features that enable it to perform in a superior manner. Among those features you will find:
1.Multi-witching methods: intelligent, ir remote or by touch button
2.Supports hdmi1.3b
3.Supports highest video resolution 1080p.
4.Supports 250mhz/2.5gbps per channel (7.5gbps all channel) bandwidth.
5.Supports 12bit per channel (36bit all channel) deep color.
6.Hdcp pass-through.
7.Supports uncompressed audio such as lpcm.
8.Supports compressed audio such as dts digital.
Model mumber: yes1-100ga
Detailed product description
Automatic transfer switch application: source changeover switching for all industrial and commercial lv electrical installations
From 20 to 3200a.
Original features and advantages: ití»s a wholly new design concept, offering a compact automatic changeover switching
System which only requires the power cables to be connected for it to operate.
Main functions and characteristics:- motorised changeover of two mechanically-interlocked cut-out and disconnection
Systems
- emergency manual control - power sources and changeover controlled by an integrated electronic module- configuration, display and communication using an ergonomic programming and command/control
Interface
- simplified connection using a self-powered voltage measurement kit connected to
The power sources which have to be switched over (optional)
- product ready for use, tested at the factory
Switch port: 8/16
Enables two users control on both local and remote side.
Local console up to 300M far away.
IP control supported.
Resolution up to 1920x1440 (local side), 1280 X1024 (remote side).
Support Microsoft Intellimouse, Microsoft Intellimouse Explorer, Logitech Net Mouse or the other fully compatible MS mouse.
Support DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux.
Support iMAC, Power MAC and Sun Micro Systems with USB port
No Software Required --- easy computer selection via OSD, Push Buttons, HotKeys
Various Hotkey (Scroll-Lock/ Caps-Lock/ Num-Lock/ Alt/ Ctrl/ Win) make switching easier, and avoid Hotkey being used times.
Support two levels of password security protections
Provide ACL (Access Control List) security function, store up to 8 independent ACLs of controllable computer list
Hot Plug íºC add or remove connected computers without powering off the KVM switch or computer
Bandwidth: 200MHz.
Keyboard status restored when switching computers
Daisy Chain: Bus (8-layer) and Tree (2-layer) topologies.
Support both PS/2 and USB.
Switch port: 16/32
Enables two users to control PCs/servers via CAT5 port, saving much cables and space.
Support control over IP (add IP module).
User control PCs/server 300M away from KVM switch.
Resolution up to 1920x1440.
Support Microsoft Intellimouse, Microsoft Intellimouse Explorer, Logitech Net Mouse or the other fully compatible MS mouse.
Support DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux.
Support iMAC, Power MAC and Sun Microsystems with USB port (Need work with USB-PS2 adapter).
Hot Plug íºC Plug in/out PCs without Powering off the KVM switches or PCs.
No Software Required --- easy computer selection via On Screen Display (OSD) Menu.
Support two levels of password security protections.
Provide ACL (Access Control List) security; store up to 8 independent ACLs of controllable computer list.
Auto Scan for monitoring PCs, scan time from 5~99 seconds.
Bandwidth: 200MHz.
Daisy Chain: Bus (8-layer) and Tree (2-layer) topologies.
Control 16/32 PC/servers (direct); up to 512 PC/servers (daisy chain).
Support both PS/2 and USB.
Advantages:
Unique design anti-drop lock prevents the LCD screen sliding down unexpectedly.
The interior chain-like cable is less to be broken off; the using life is twice or thrice longer than the usual cable.
Built-in power adapter, -36V to -72V.
Direct currency power supply (optional).
Support hotkey switch on Sun server.
Shortest length can be installed in 488mm rack mount.
General information:
1U height, install in 19'' rack mount
17" TFT/LCD high-resolution monitor 1920 x 1440 @ 75Hz
Integrated touchpad or trackball mouse
Control of 1/8/16 server directly from one LCD console or 128 servers (Daisy chain)
Auto scan for monitoring selected servers, and store the using of previous PC/server, scan interval 5'' to 99''.
Quick and easy rack mounting installation, no software required.
Required only one user to control, easy to use, OSD menu on LCD.
On-Screen Display (OSD) in multiple languages: English(US), English(UK), German, German(Swiss), French, Spanish, Traditional Chinese, Japanese, Korean, Swedish, Italian, Russian, Hungarian.
Support DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux,
Support iMAC, Power MAC and Sun Microsystems with USB port (work with USB-PS2 adapter).
Video settings of attached computers are automatically adjusted for optimal output to the LCD monitor.
8 characters password protection.
Automatically power on/off.
KVM-1708P requires only PS/2 interface; KVM-1708U supports both PS/2 & USB.
Package Content:
1 x KVM-1501
1 x KVM cable
1 x power cord
2 x hangers
1 x user's manual
1 x warranty card.
Model No.: KS-1001IP
Manage KVM switches and servers remote over the Internet
Manage multiple servers or computers by connected a normal KVM switch
KVM (keyboard, video, mouse) access over IP and analogous telephone line
Support DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux
Support iMAC, Power MAC and Sun Microsystems with USB port.
Hot Plug - Add PCs or Remove Connected PCs for Maintenance without powering off the KVM switch or PCs.
Resolution Up To 1920X1440 (local side), 1280 X1024 (remote side).
Management of remote servers from BIOS level Up to GUI level applications.
Ultra secure access with full 1024-bit PKI authentication and 256-bit SSL encryption.
Keyboard status restored when switching PCs.
LED Display for easy status monitoring.
Buzzer sound for switching port confirmation.
No DIP switch setting needed and auto detect daisy chain bank.
No impact on server or network performance.
Automatically senses video resolution for best possible screen capture high-performance mouse tracking and synchronization.
Switch port: 8/16
Enables user to control 8/16 PC/servers (direct), up to 128 PCs/servers (daisy chain).
Support Microsoft Intellimouse, Microsoft Intellimouse Explorer, Logitech Net Mouse or the other fully compatible MS mouse.
Support DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux.
Support iMAC, Power MAC and Sun Microsystems with USB port (Need work with USB-PS2 adapter).
Resolution up to 1920X1440.
Bandwidth: 200MHz.
No Software Required - easy PC selection via On Screen Display Manual, Push Buttons, and Hotkeys.
Hot Plug íºC Plug in/out PCs without Powering off the KVM switches or PCs.
Support 8 characters password protection and search PC server name Search PC/server by name.
Auto Scan Mode for monitoring PCs, scan time from 5~99 seconds.
Record keyboard status when switching PCs.
LED Display for easy status monitoring.
Buzzer sound for switching port confirmation.
No DIP switch setting needed, auto detect daisy chain bank.
Interface: only PS/2, or both PS/2 and USB.
Supporting : Full duplex and half duplex transmission and capable of automatic negotiation.
efficient built-in switching core ,to implement flow control and reduce broadcast packets.
Supporting : The transmission of extra-long packets over VLAN.
Supporting : The selection of multiple types of fiber ports such as dual-fiber multi-mode.
dual-fiber single mode and single fiber single mode, to satisfy the extended requirements of users.
Parameter:
Parameters Specifications
Access mode 10/100/1000Mbps Gigabit Ethernet
Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength 850nm/1310nm/1550nm
Transmission distance Dual-fiber multi-mode: 220m (fiber size: 62.5/125¦m)/550m(fiber size: 50/125¦m)
Dual-fiber single-mode: 10/20/40/60/80/100/120Km
Single-fiber single-mode: 10/20/40/60/80Km
Category-5 twisted pairs: 100m
Port One RJ45 port: Connected to STP/UTP category-5 twisted pairs
One fiber port: dual-fiber multi-mode SC (fiber size: 50,62.5/125¦m) Dual-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m)
Single-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m)
Conversion mode Medium conversion
Delay <10¦s
Bit error rate <1/1000000000
MTBF 100,000 hours
LED POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), TP ACT (twisted pair packet forwarding action)
Power AC220 0.5A/DC-48 (builtin)
Power consumption internal power supply or external power supply: AC100 265V / DC5V
Operating temperature -10~55
Operating humidity 5%~90%
Storage temperature -40~70
Storage humidity 5%~90% (non-condensing)
Dimensions 26mm(H)*70mm(W)*98mm(D) (height*width*depth) (builtin power)
120mm(H)*24mm(W)*78mm(D) (depth*width*height) (module card)
Ordering Choice:
Model
Working wavelength
Fiber
Electrical port
Fiber model
Tx power(dBm)
Rx power(dBm)
Transmission
