Name: High efficiency polysilicon wafer
Technology : Diamond wire cutting
Type : P type
Resistance:1~3μs
minority carrier:>2 μs
Hem width:157.00~157.25mm
Thickness:200±20μm
Transfer efficiency:>18.8%
Advantage of
High efficiency polysilicon wafer for solar cell
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Advantage of
high quality rHigh efficiency polysilicon wafer for solar cell
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Equipment situation
Seiko JJL800F Type, 36 polycrystalline ingot foundry furnaces, the annual output is 2000 tons of semi-fused high efficiency polycrystalline silicon blocks and the demand of native polycrystalline ingots is 1700tons.
There are 12 sets of WuXi ShangJi brand diamond wire slicing machines, 8 sets reforming machines, the single blade capacity is 20,000 pieces per day, and the annual production capacity is over 10 million pieces.
250W MONO SOLAR PANEL FROM HETECH ENERGY
Electrical Characteristic:
Module Type HT-M305W-72P
Peak power 305W 0~+3%Toleracne
Optimum Operating Voltage(Vmp) 36.8V
Optimum Operating Current(Imp) 8.28A
Open-Circuit Voltage(Voc) 44.5V
Short-Circuit Current(Isc) 9.11A
Maximum system voltage DC1000V
Warranty
5 years product defect warranty.
25 years power output warranty:
90% in 10 years, 80% of 25 years.
Our Products
Mono-crystalline and Poly-crystalline solar panel from 3 watt to 325 watt
Home-use Industrial-use solar system 3W to 5MW
Other accessories like Connector Inverter and Distribution box etc.
Advantage of
156x156mm 200um High efficiency P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Technology : Diamond wire cutting
Type : P type
Resistance:1~3μs
minority carrier:>2 μs
131 Solar Cookers Suppliers
Short on time? Let Solar Cookers sellers contact you.
Advantage of
156x156mm 200um High efficiency P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Technology : Diamond wire cutting
Type : P type
Resistance:1~3μs
Advantage of
High efficiency P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Name: High efficiency polysilicon wafer
Technology : Diamond wire cutting
Type : P type
Resistance:1~3s
minority carrier:>2 s
Hem width:157.00~157.25mm
Thickness:200±20m
Transfer efficiency:>18.8%
Technology : Diamond wire cutting
Type : P type
Resistance:1~3μs
minority carrier:>2 μs
Hem width:157.00~157.25mm
Thickness:200±20μm
Transfer efficiency:>18.8%
Advantage of
P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
http://en.hengxingchinese.com/
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Technology : Diamond wire cutting
Type : P type
Resistance:1~3μs
minority carrier:>2 μs
Hem width:157.00~157.25mm
Thickness:200±20μm
Transfer efficiency:>18.8%
Advantage of
P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
http://en.hengxingchinese.com/
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Advantage of
P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
White And Yellow Beeswax Food Grade For Cosmetic / Soap / Lip Balm
Basic Information
Place of Origin:
Henan, China (Mainland)
Brand Name:
Super-Sweet
Certification:
ISO, HACCP, FDA, GMP
Model Number:
SS1001
Minimum Order Quantity:
1000KGS
Price:
$5.9-7.9/KG
Packaging Details:
25KGS/BAG
Delivery Time:
7days
Payment Terms:
T/T, L/C, Wester Union, Cash, D/P, D/A
Supply Ability:
2000TONS
Product Description
Top quality cosmetic grade 100% natural pure bulk beeswax pellet for wholesale
SUPER-SWEET is one of the leading China beeswax suppliers and manufacturers, our professional factory is
able to produce natural and organic beeswax with cheap price and high quality. Welcome to wholesale pure and
raw bees wax, and to buy bulk products from us.
Pure Beeswax is one of nature's perfect products. Made by industrious honey bees from the nectar of flowers, beeswax has a sweet, natural fragrance all its own.
Beeswax is obtained from the honeycombs of bees after the honey has been removed by draining or centrifuging.
The combs are melted with hot water, steam or solar heat; the melted product is filtered and cast into cakes of yellow
beeswax.
C.A.S. number 8012-49-3
Beeswax is best wax for making candles by virtue of following points:
1. The only candle that emits negative ions to purify, cleanse, improve air quality, and invigorate the body.
2. The natural scent of beeswax has a harmonizing effect, benefit those with environmental allergies, asthma
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Name: High efficiency polysilicon wafer
Technology : Diamond wire cutting
Type : P type
Resistance:1~3
minority carrier:>2
Hem width:157.00~157.25mm
Thickness:200±20μm
Transfer efficiency:>18.8%
Technology : Diamond wire cutting
Type : P type
Resistance:1~3s
minority carrier:>2 s
Hem width:157.00~157.25mm
Thickness:200±20m
Transfer efficiency:>18.8%
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Advantage of
Sawing Wire for Solar Wafer Cutiing
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Advantage of
Sawing Wire for Solar Wafer Cutiing
--------
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology
Hengxing Solar Wafer Cutting Diamond Multi-Wire Sawing Ultra Fine Steel Saw Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
305W MONO SOLAR PANEL FROM HETECH ENERGY
Electrical Characteristic:
Module Type HT-M305W-72P
Peak power 305W 0-+3%Toleracne
Optimum Operating Voltage(Vmp) 36.8V
Optimum Operating Current(Imp) 8.28A
Open-Circuit Voltage(Voc) 44.5V
Short-Circuit Current(Isc) 9.11A
Maximum system voltage DC1000V
Warranty:
5 years product defect warranty.
25 years power output warranty:
90% in 10 years, 80% of 25 years.
Mechanical Characteristics:
Module type HT-M305W-72P
Size 1956-992-45mm
Weight 27kg
No. of Cells 72(6-12) pcs
Cell dimension Mono 156-156mm
Front cover 4.0 mm (0.16 inches) tempered glass
Frame Anodized aluminum alloy
Junction Box IP67/IP65 rated
Connectors MC4
