ASME B16.11
Forged threaded fittings:90-deg elbow,45-deg elbow,tee,cross,coupling,half-coupling,cap,square head plug,hex head plug,round head plug,hex head bushing,flush bushing,street elbows
QB2000 gas alarm control panel is a multi-point monitoring of the latest design with simple operation and it combines with any gas detectors to form an industrial gas detection system.
This control panel embeds micro processor as control unit, when the detected gas density in the air reaches or exceeds the pre-set value, the controller will give out audio-visual alarm immediately to remind you take safety precautions and alert the corresponding valve, exhauster and other equipment to avoid explosion, fire, toxic gases to protect the safety of life and treasures.
This system applies to metallurgy, petrol, petrifaction, chemistry, light industry, coking, municipal administration, gas, pharmaceutical, sewage dealing and many other special industry and field that need proofing for fire, explosion, and toxic gas leakage.
Characteristics:
High-performance sensor
128*64 dot matrix big screen liquid digital display
With English Instruction Manual and pictures easy to operate
Various gas detector together to fix
Display the detected gas density in distance
High sensitivity, and quick response
Automatic compensation for temperature -drift and time drift
The up and low alarm points of each channels can be set separately
8 channel 4-20mA signals output
RS485, RS232 communication port can upload data to computers & 4 Relay output and the relay setting is programmable
4-20mA analog output for direct communication to DCS system or RS485 ModBus RTU output optiona.
Relay output for connecting external device
LCD display screen(LED display screen optional)
Advantage: Sensor module(block) design on -spot replacement s and automatically distinguish sensor fault and current display fault simultaneously.
When the sensor out of service or the sensor fails, the user can check and solve the problem by replacing spare modules,saving the time and cost.
The LCD display and LED display module can be interchanged, supporting swift hot swap,support plug and play functionality.
The sensor module and the connection interface in the detector have jack and plug prevent improper insertion.Just spin and press the plug gently,the plug can be inserted the jack.
The sensor module of the detector can be replaced by the same type module and the different gas sensor module,and different range sensor module. The detector can distinguish and operation itself.
Whatever the sensor module is chosen to replace the original one, there is no need to re-calibrate it. The detector automatically distinguishes the sensor module, reads the ex-factory calibration value and the related setting value and operates detecting when the self-inspection is done.
Password verification for repeat operation, avoid fault operations.
-40~+70 following compensation for accurate detecting.
Twp grade visual alarms on-site and Relay (connected with audible/visual alarms or drive exhaust device).
User-selectable alarm setpoint(s).
1435 Electrical Household Other Goods Components Suppliers
Short on time? Let Electrical Household Other Goods Components sellers contact you.
Yusheng's ball mill spare parts is designed together with the machine to ensure the best possible crushing performance. Absolutely correct dimensions and solid casting quality protect your crusher from overload danger.
Mosi2 electrical heating element
MoSi2 electrical-heating element is a resistance generate-heating component made from MoSi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and forms a light SiO2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800f¦ during oxidizing atmosphere. According to your request, our company can produce the products of Pole, "U", "W" and "U"-right angle shapes
SiC heating element
Silicon Carbide (SiC) heating element is a non-metal electric heating element made from SiC as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance
Usage: measure body temperature for critical patients
Product performance: the temperature test range: 25 ~ 45 ;
Temperature test precision: ± 0.1 ;
Product structure: consists of plug, cable, sensor;
Application Scope: multi-parameter monitor;
Contraindications: this product may not be fixed in the position of the tissue damage
Shipment: DHL/FEDEX/EMS/TNT/UPS
Supply Ability: 1000 Piece/Pieces per Week
Packaging Details: Separate packaging, then put in outer box
Model NO.:500ZB3-58
Conductor Circuit:Single Circuit
Materials:Steel
Style:Independence Tower
Nominal Height:58m
Ground Wire Type:Opgw-150
Package:Standard Package or According to Your Request
Usage:Tension Tower, Linear Tower
Certification:ISO, GS
Standard:Standard
Structure:Customized
Wire Type:4*Lgj-400/35
Specification:SGS or according to your drawings
HS Code:73082000
GRT industrial machine for fruits hot air circulation dryer for lemon
Specification :
1. Polished stainless-steel chamber
2. Latest PLD controller
3. Uniform distribution of air temperature
4. Forced-air convection
5. Heating methods:Electric or Steam heating
6. High efficiency
The fearures of hot air circulation drying machine:
1. Options of heat source: steam, electricity, or far infrared, or both steam electricity.
2. Drying temperature: steam heating 50-130 °C, Max.140 °C.
3. Electricity and far infrared:50-300 °C .Automatic control system and computer control system on request.
4. Commonly used steam pressure 0.2-0.8Mpa (2-8 bar).
5. For GRT-C-I, electric heated, rated power consumption: 15Kw, real consumption: 5-8Kw.
6. The special requirements should be indicated at the time of order.
7. Please consult as for any special requirements.
8. For operation temperature of over 140 °C or less than 60 °C, please indicate when order.
9. The ovens and baking trays made by our factory are uniform in dimensions, and can be exchanged each other.
10. Baking plate dimensions: 460*640*45mm
The application of hot air circulation drying machine :
Hot air circulating electric oven is suitable for heating and dehumidifying raw materials and products for pharmaceutical, chemical, foodstuff, light industry and heavy industry.
For example,active pharmaceutical ingredients,Chinese medicine yinpian, powder, granule, crude drug, drug packing bottle, pigment, dyestuff, dehydration vegetable, food, plastic resin, electric elements, salt, paper,leather, wool, catalyst materials dry.
Our services :
1.Accept OEM service
2.Engineers available to service machinery overseas
3.Our products including:Hot air batch dryer, mesh belt dryer,tunnel microwave drying machine, microwave vacuum dryer,etc.
4. we are able to cater to all the required expectations of our valued clients .
Why Choose Us?
1.We are professional drying equipment manufacture in china,has excellent experience.
2.We have advanced machine equipment, cost savings.
3.We supply 24 hours online service to solve your every question.
4.We have the best knowledge about the drying machine in USA,UK,CANADA,SOUTH AFRICA,INDIA,AUSTRALIA,ETC.
industrial stainless steel mango chips drying machine with low price
Specification :
1. Polished stainless-steel chamber
2. Latest PLD controller
3. Uniform distribution of air temperature
4. Forced-air convection
5. Heating methods:Electric or Steam heating
6. High efficiency
The fearures of industrial stainless steel ginger chips drying machine :
1. Options of heat source: steam, electricity, or far infrared, or both steam electricity.
2. Drying temperature: steam heating 50-130 °C, Max.140 °C.
3. Electricity and far infrared:50-300 °C .Automatic control system and computer control system on request.
4. Commonly used steam pressure 0.2-0.8Mpa (2-8 bar).
5. For GRT-C-I, electric heated, rated power consumption: 15Kw, real consumption: 5-8Kw.
6. The special requirements should be indicated at the time of order.
7. Please consult as for any special requirements.
8. For operation temperature of over 140 °C or less than 60 °C, please indicate when order.
9. The ovens and baking trays made by our factory are uniform in dimensions, and can be exchanged each other.
10. Baking plate dimensions: 460*640*45mm
The application of factory price industrial stainless ginger chips drying machine :
Hot air circulating electric oven is suitable for heating and dehumidifying raw materials and products for pharmaceutical, chemical, foodstuff, light industry and heavy industry.
For example,active pharmaceutical ingredients,Chinese medicine yinpian, powder, granule, crude drug, drug packing bottle, pigment, dyestuff, dehydration vegetable, food, plastic resin, electric elements, salt, paper,leather, wool, catalyst materials dry.
Our services :
1.Accept OEM service
2.Engineers available to service machinery overseas
3.Our products including:Hot air batch dryer, mesh belt dryer,tunnel microwave drying machine, microwave vacuum dryer,etc.
4. we are able to cater to all the required expectations of our valued clients .
Why Choose Us?
1.We are professional drying equipment manufacture in china,has excellent experience.
2.We have advanced machine equipment, cost savings.
3.We supply 24 hours online service to solve your every question.
4.We have the best knowledge about the drying machine in USA,UK,CANADA,SOUTH AFRICA,INDIA,AUSTRALIA,ETC.
GRT best quality contiuous drying machine microwave drying oven/dryer
Features of microwave drying machine/dryer :
1) Machine material: food-grade SUS304 stainless steel
2) Energy-saving more than 30%
3) High production efficiency
4) Safety and easy clear.
5) Improve working conditions: PLC touch screen control, automatically operation
6) The device control host environment temperature: seasonal normal temperature, environment relative humidity is less than 85RH.
7) Equipment body (microwave generating source part): Non corrosive gases, flammable, explosive gas around, environment temperature is 0-38 ?environmental relative humidity is lower than 85RH
8) Site requirements(L*W*H): 10m*3m* 3m
9) It is suitable for the deep drying of many material with drying and sterilization, such as, bean, corn, rice, ground peanut, etc.
10) The equipment which need user provided : The pipeline from the fan to the outside, drainage fan, The standby power supply, power line, transformer. Cooling oil and etc.
The working principle of microwave dryer/drying machine :
microwave is issued by the microwave generator, formed a strong magnetic field in the microwave sterilization cavity. The water molecules in the material produced high speed reciprocating motion by the polarity change in the magnetic field, friction heat, and then for the purpose of sterilization.
Packaging&Shipping:
1, Packaging Details: one Industrial tunnel dryer/microwave drying machine is fit for a 40GP.
2, Delivery Detail: One Industrial tunnel dryer/microwave drying machine needs 20 days, two dryers 30-40 days.
Our services :
1.Accept OEM service
2.Engineers available to service machinery overseas
3.Our products including:Hot air batch dryer, mesh belt dryer,tunnel microwave drying machine, microwave vacuum dryer,etc.
4. we are able to cater to all the required expectations of our valued clients .
Why Choose Us?
1.We are professional drying equipment manufacture in china,has excellent experience.
2.We have advanced machine equipment, cost savings.
3.We supply 24 hours online service to solve your every question.
4.We have the best knowledge about the drying machine in USA,UK,CANADA,SOUTH AFRICA,INDIA,AUSTRALIA,ETC.
Multi layer type continuous hot air drying machine/oven usage:
Widely used in metallurgy, building materials, ceramics, organic fertilizer, chemical and other industries, and the ideal equipment for food and vegetables drying processing.Multilayer belt type hot air dryer is used of steel net work as a transport carrier material for continuous drying equipment, the most suitable for flow operation.Due to the conveyor is a mesh, so drying rules or irregular various substance is the most appropriate (such as :coal, ore forming block, food, vegetables, etc.) .This machine not only can be used with other equipment,but also used alone.
hot air drying machine/oven features:
Multilayer belt type hot air dryers has head, drying section, tail, mesh belt, transmission device, air inlet pipe, air discharge pipe, fan (hot air source ) etc. Material is from head into chamber slowly drying by drying, mesh belt speed depending on the kinds and moisture content of the material.The wind flow adapt negative pressure , porous air intake to ensure effective drying area.Wind speed distribution uniform ,which improve the effect of drying.
Packaging&Shipping:
The continuous drying equipment will be packed in nude,motor and other parts will be packed in wooden case.
It will be delivered by air,international express or by sea!
Good package will assure you recived the goods in good condition!
Our services :
1.Accept OEM service
2.Engineers available to service machinery overseas
3.Our products including:Hot air batch dryer, mesh belt dryer,tunnel microwave drying machine, microwave vacuum dryer,etc.
4. we are able to cater to all the required expectations of our valued clients .
Why Choose Us?
1.We are professional drying equipment manufacture in china,has excellent experience.
2.We have advanced machine equipment, cost savings.
3.We supply 24 hours online service to solve your every question.
4.We have the best knowledge about the drying machine in USA,UK,CANADA,SOUTH AFRICA,INDIA,AUSTRALIA,ETC.
In the field of cryogenic containers, liquid nitrogen tanks play a very important role. With the continuous advancement of science and technology, the functions of liquid nitrogen tanks have become more comprehensive. There are two storage modes: gas-phase liquid nitrogen tanks and liquid-phase liquid nitrogen tanks. However, their working principles and usage methods are slightly different.
Among them, gas-phase liquid nitrogen tanks have the advantages of preventing sample cross-infection, reducing the risk of sample tube explosion, and reducing liquid nitrogen damage. Therefore, most laboratories and scientific research institutions currently prefer to use gas-phase liquid nitrogen tanks for sample storage.
Its working principle is also very simple, which is to store liquid nitrogen in a tank and use the evaporation and cooling of the liquid nitrogen to preserve the sample. At the same time, it also has high vacuum insulation technology to reduce the volatilization rate of liquid nitrogen and keep the pressure inside the tank stable.
In addition, there is a tray inside the gas phase tank. The liquid nitrogen is stored below the tray, and the sample storage space is above. This design makes good use of space.
The structure of the liquid-phase liquid nitrogen tank is different. It puts the sample directly into the liquid nitrogen so that the sample is completely submerged. The advantage of this method is that the temperature is lower and the sample can be stored for a longer period of time.
However, today's science and technology are so advanced that liquid nitrogen tanks have been used in both gas and liquid phases. For example, KGSQ's gas-phase liquid nitrogen tanks and small gas-liquid phase tanks are compatible with both gas-phase and liquid-phase storage modes, allowing you to use them at any time Switch to meet different experimental needs.
In any case, both gas phase tanks and liquid phase tanks have their own advantages. The stable structure and performance of the gas phase tank can ensure the long-term storage of liquid nitrogen and can also reduce problems such as leakage and volatilization of liquid nitrogen. The liquid phase tank has the advantages of lower temperature and easy operation, which are also popular among users.
If you have any needs, please contact KGSQ liquid nitrogen tank:
Email: tcln2container@126.com
WhatsApp: +8618903712477
Official website:
https://www.cryogenicstoragetank.com/YDD-Series-Biobank-Tanks.html
Three-roll electric separator
Characteristics of automatic three-roller internal-circulated electric separator:as it belongs to multi-roller equipment, materials are sorted through three rollers from the top down, and after extraction recovery rate can reach 99.8%. The efficiency of this model is three or four times higher than that of single-roller electric separator with automatic operation.And it can save two or three times labors and electric charges.This equipment has many advantages such as automatic control, better sorting effects, high security, large treatment capacity, high soring purities, reliable operating as well as convenient operation .The automatic cleaning and dust-absorption pneumatic system prevent dust pollutions.
Three-roll electric separator
Electrolytic aluminum waste sorting
Electrolytic aluminum anode waste mainly contains: carbon material, cryolite, alumina, iron and other trace impurities. The recycling production line of electrolytic aluminum anode scrap can extract cryolite and carbon block with purity of 99 percent, and also extract iron and iron oxide, make each material apply to corresponding industrial, realizing the recycle economy reuse and the "3 without" mode:without environment pollution, without harm, without waste .It adopts physical method and chemical method to extract and refine respectively for various materials form anode waste.Realizing the resource recycling, the equipment has the features with automatic operation, high efficiency, low labor intensity, low energy consumption, small covers, low noise, etc. A full set of equipment’s operation is automatic controlled by plc, only need to three to four people.All water is recycling, greatly saving the cost of recycling. Patent no.:201110297236.2
The product line’s main equipments are: feed bin, conveyor, vibration sieve, dust collecting equipment, composite cylinder.Winnowing screen, color separator, magnetic separation conveyor and multi-layer vibration sieve, bunker, electric separator, crusher, feeding machine, milling machine, collecting machine, vibration sieve, flotation machine, dryer, water pump, reaction kettle, washing machine, dewatering machine, mixer, extruding machine.
Electrolytic aluminum waste sorting
Electrical components dismantling equipment
The new type circuit boards separation equipment is adjust to recycle kinds of e-waste scrap such as circuit boards witn components, circuit boards, electrical scrap(mobile phone boards, tv boards, computer boards, washing machine boards, refrigerator boards), fpc flexible circuit boards etc.This technology process flow through feeding, first crushing, magnetic separating, suction wind separating, second crushing, wind separating, gravity separating, third crushing, electric separating, dust collecting.This technology could process the circuit boards with electric components in the equipment without dismantling, separate metal and non metal and wind separate recycle the aluminum foil, plastic film that in the capacitance or electrical components.The metal recycling rate could reach above 99%.Automatically operating through feeding and separating, 400t/day capacity, only need 1-2 people to operate.This technology adopts physical , namely, dry method separation without heating, fire, water , chemical material and any pollution, high efficiency, low cost.
Features:
1, this technology adopts advanced mechanical crushing and high voltage electrostatic separating.Separating metal and non metal after crushing and dismantling, with high purity.
2, key technology is connecting the equipments that specially used in the crushing and dismantling of all kinds of waste circuit boards, could have better energy-saving and high metal recycling rate in the production.
3, the equipment have good comprehensive performance, and have unique effect on electrical components, computer boards, tv boards and other circuit boards.
4, this technology is upgrading products with the circuit boards recycling equipment, could separate the circuit boards with electrical components , with low consume, no noise, high automation program, high efficiency and need smaller area, for now the technology is the best equipment to recycle waste circuit boards.
Electrical components dismantling equipment
1435 Electrical Household Other Goods Components Suppliers
Short on time? Let Electrical Household Other Goods Components sellers contact you.
