Find Verified Beer Dispenser Suppliers, Manufacturers and Wholesalers

Material: Plastic
Type: Press Type
Usage: hold cotton roll
Color: blue, green, white, yellow, purple, black
Shape: molar shape, square shape

Range of flow: (5~55)L/min 
Max. tolerance: 0.3% 
Min. measured volume: 5L
Noise: =80dB(A) 
Inlet vacuity: =54kPa 
Scope of unit price: 0~99.99$/Liter
Range of single counting: Volume/Amount: 0~9999.99Liter 
Range of accumulative counting: Volume/Amount: 0~999999.99Liter
Power supply: AC220V/380V 60HZ 
Rated power: 750W 
Ambient temp: -40ºC ~+55ºC
Relative humidity: 30%~90%

At present, JAYO Petro mainly provides two types of fueling hoses for customers according to the different conductive forms: the dispenser hose with conductive copper wire and the dispenser hose with conductive rubber.

Technical Parameters of Fueling Hose
Type : Hose with electroconductive rubber
Model I with fabric reinforcement
Conductive form is rubber conductive.
Temperature grade: Low temperature grade, -40 ~+55
Max working pressure: 1.6
Min burst pressure: 4.8
Coefficient of cubical expansion(max): 2%
Conductivity(max): 1 106
Other performance meets EN1360
Type M: Hose with copper conductivity
Model I with fabric reinforcement
Conductive form: Type M, metal wire conductive (copper conductive)
Temperature grade: Low temperature grade, -40 ~+55
Max working pressure: 1.6
Min burst pressure: 4.8
Coefficient of cubical expansion(max): 2%
Conductivity(max): 1 102
Other performance meets EN1360

We provide 16mm/19mm/25mm for customers to choose.

Combined vane pump ZYB-50/ZYB-80 has two upper cover structures A & C to choose, suitable for connecting different pipelines. With built-in oil and gas separator and relief valve, this kind of pumps have advantages of low noise, large flow and long lifespan.

Working Process of Vane Pump
When the high-pressure oil output by the vane pump enters the oil-gas separation pipe from the oil outlet of the pump, under the action of the deflector at the inlet of the oil-gas separation pipe, most of the oil advances in a spiral shape along the inner wall of the oil-gas separation pipe. Finally, it flows from the oil outlet of the oil-gas separation pipe to the oil outlet valve. The gas mixed in the oil is less dense than the oil, so it is concentrated in the middle of the official cavity, and finally discharged from the oil-gas separation pipe to the normal pressure cavity. After the oil-gas mixture enters the atmospheric chamber, the gas floats up, discharged into the atmosphere through the exhaust pipe. And the oil is stored in the normal pressure chamber.

When the oil accumulates to a certain amount, the float floats up, driving the connecting rod to open the oil return valve, and the oil flows to the low pressure chamber through the oil return valve. While when the oil level drops to a certain height, the float falls back under the action of gravity, the oil return valve closes the valve, and the oil return function stops.

When the rotor rotates continuously, the vane pump outputs a certain pressure and flow of oil. The size of the oil delivery pressure depends on the pressure adjustment state of the relief valve and the load resistance. And the pressure oil coming out of the vane pump enters the oil-gas separation pipe for oil-gas separation. Part of gas-free oil coming out of the oil-gas separation pipe will return to low-pressure chamber through relief valve. And the other part will enter the flowmeter via the oil outlet valve.

When fuel nozzle is open, the load resistance would be small, and the pressure oil overcomes the spring force of the oil outlet valve and enters flow meter from the oil outlet valve, and the relief valve is closed or slightly opened. When fuel nozzle is closed, the oil pressure rises, then relief valve is completely opened. Next the pressure oil in the high-pressure chamber flows through relief valve to the inlet of vane pump and recirculates. Usually, the pressure and output flow of hydraulic system can change by adjusting the stud of relief valve.

Model Number:BCD-380
Specifications:
* Mechanical temperature control
* Energy saving and low noise
* Frost-free design
* Interior light in refrigerator
* Tempered-glass shelf in fridge
* Adjustable epoxy-coated wire shelf in fridge
* Multi-air-flow design
* Fruit and vegetable crisper.


Detailed Description
Model: BCD-380w
Capability: 380L
Product Size: 690*700*1712 (mm)
Packing Size: 736*759*1792 (mm)
40í»HQ Load Quantity: 67 PCS
G.W/N.W: 80/75 kgs
Power Source: 220V/50HZ
Refrigerant/Weight(g): R134a
Euro energy class: A
Input Power: 120 W
Power consumption: 1.19kWh/24h
FF temp.: 0 ~ 10oC
FZ temp.: í_-18oC
Handle: Grip
Lock: Without
Fridge capacity: 282L
Freezer capacity: 98L
Condenser (Optional): Inside or Outside.

It is applicable for cosmetics, yogurt caps, pharmaceutical bottle caps, milk tear-off caps, anti-theft bottle caps, aluminum drink caps, beer bottle caps. The chose paint is of food grade. It does not contain bisphenol A, ensuring that the bottle cap is safe and non-toxic and has no impact on human health. Our color-coated bottle cap materials all have corresponding qualification certificates.
Since most bottle caps are used for beverage, wine and medicines, the used painting of Haomei bottle cap material is required to follow food grade. It is BPA free. In addition, the cotent of lead, mercury, cadminum, PBB, PBDE comply with the limits as set by RoHS.

DY-HPT Hand-Push Thermoplastic Pavement Striping Machine, used together with the pre-heater to mark lines, is the general equipment in the thermoplastic road marking constructions. Its marking shoe material and manufacture process are good, the floor knife is durable and abrasion resistant, the glass beads dispensing is even and adjustable, and the operation of straight lines and curved lines is precise. The marking line has the advantages of regular edge and head, uniform thickness and beautiful shape.

1) Paint tank: Stainless or high temperature resistant steel ektexine and inner bucket. Capacity: 70kg. The heating temperature can be freely controlled according to the different kinds of paint chosen by users. The tank is equipped with plug type hand stirring device.
2) Capacity of glass beads bin:12kg.
3) Glass beads dispenser: The automatic glass beads dispenser is synchronous with the marking system. The dispensing quantity can be freely adjusted.
4) Marking shoe: The screeding marking shoe is made of special material with the characteristics of high-precision, shock resistance and high temperature resistance. The standard configuration is 150mm.
5) Screeding knife: Hard alloy with eccentric device. The line thickness can be adjusted by coordinating with the adjusting device in the front of the marking shoe. (Adjusting range: 1.5mm - 2.5 mm.)
6) Rubber wheel: The wheel is made of heat resistant rubber. The back stern wheel is equipped with locating device which ensures the machine walks in straight line or operates easily when turning.
7) Marking width: 100/150/200/300mm (Special sizes can be customized). Marking shoe can be changed into different sizes according to the construction requirements.
8) Heating: Liquefied petroleum gas (LPG).
9) Net weight: 150Kg.
10) Dimension: 1200mm(length)*950mm(width)*1100mm(height)

•relative immunity to short circuits caused by external forces (wind, fallen branches), unless they abrade the insulation.
•can stand in close proximity to trees and will not generate sparks if touched.
•simpler installation, as crossbars and insulators are not required.
•less cluttered appearance.
•can be installed in a narrower right-of-way.
•at junction poles, insulating bridging wires are needed to connect non-insulated wires at either side. Abc can dispense with one of these splices.
•less risk of a neutral-only break from tree or vehicle damage, increasing safety with tnc-s systems.
•electricity theft is made harder, and more obvious to detect.


Drum or as your request

DY-SPTC-II Self-Propelled Thermoplastic Convex Pavement Striping Machine adopts the latest intelligent process controller and the humanized control panel. It finishes the vibrating line and flat line construction work at the same time. The variable speed transmission system can be flexibly operated in forward and back off, which greatly improves the construction efficiency. The regular profile shape, profile height, profile space and profile quantity are precise and perfect. The machine can meet different needs of roads in different countries and areas with the features of high deformation, abrasion and shock resistance etc.

1) Engine: American Briggs & Stratton 5.5HP gasoline engine.
2) Controlling system: Micro-computer controlling system with electronic display. Various standard line. The profile quantity, profile length and profile height and profile space can be adjusted freely.
3) Driving: The variable speed transmission system can be flexibly operated in forward and back off with power, which ensures fast construction speed and high work efficiency.
4) Paint tank: Stainless steel outside (or high temperature resistant baked coating SC steel) and inner thermal insulation bucket. Capacity:120KG (60L).
5) Capacity of glass beads bin: 15KG.
6) Glass beads dispensing: The automatic dispenser is synchronous with the marking system. The dispensing quantity can be freely adjusted.
7) Marking shoe: The single screeding marking shoe is made of special material with the characteristics of high temperature, shock, abrasion and deformation resistance. The floor knife is made of hard alloy.
8) Marking width: 100/150/200/300mm (Special sizes can be customized). Base line thickness: 1.5-2.5mm (adjustable). Profile height: 3-7mm (adjustable).
9) Climbing capacity: 15 degree.
10) Direction controlling: The back stern wheel is equipped with locating device which ensures the machine walks in straight line or operates easily when turning.
11) Heating: Liquefied petroleum gas (LPG).
12) Warning light: The machine is equipped with high brightness warning light, which is convenient for the constructions especially at night.
13) Net weight: 250Kg.
14) Dimension: 1420mm(length)*1100mm(width)*1300mm(height)

Area of appliance

Waste Water Treatment

1.Municipal sewage works

2.Industrial purification plants

3.Petrochemicals

4.Industrial acid waste neutralisation

5.Liquid chemical waste

6.Soil decontamination

7.Excavation (tunnelling)

8.Liquid electroplating waste

9.Waste water from refuse and

10.special waste incineration plants

Foodstuffs

1.Sugar 2.Cooking oils and fats 3.Beer 4.Wine

5.Yeast (for baking and brewing) 6.Pectin

Pharmaceuticals / Biotechnology

1.Agar-agar 2.Blood plasma 3.Various intermediate pharmaceuticals

4.Algae

Mining

1.Coal 2.Gravel quarries 3.Ore extraction

Chemicals

1.Pigments 2.Dyes 3.Titanium dioxide 4.Silica 5.Catalysts

6.Various intermediate products

Metallurgy

1.Lead Pb, copper Cu, zinc Zn, tin Sn, manganese Mn, nickel Ni refinement

Refinement of various non-ferrous metals

2.Precious metal refinement (Ag, Au, Pt, Pd)

3.Liquid electroplating waste

4.¡±Washer water¡± from blast furnaces


Seaworthy packaging with wooden

Uses cema standard, cad, cam and cnc technology, offering special conveyor design for different industries. Lambton belt conveyor is widely used in grain, food, seed, beer, beverage, pesticide, tailings, chemical engineering, coal, port and other industries. Its capacity can be up to 1500t (wheat)/h or 100t (malt)/h.
Drum belt conveyor features:
--advanced technology in drum design ensures smooth running and long life
--many kinds of drum combinations for different material
--conveyors with large capacity and length use large drum, cushion drum and regulating drum, ensuring safe running. It is widely used in industries like grain storage, port, coal mine, cement and electric power
--can meet requirement of no breakage and low residue level, applicable to seed, grain and oil industries
--optional conveyor structures are the complete close, semi-close and open style. Portable and fixed type are available for both level and inclined conveyor
--packaged type easy erection
Air bed belt conveyor features:
-- international advanced drum, air chamber design and manufacture skills ensure safe and smooth running
--stiffened belt
--specially suitable for outdoor work, no additional safe guard device is needed
--packaged type easy erection
--portable and fixed type are both available with perfect environment protection featureíííí