Find Verified Other Fresh Shellfishes Suppliers, Manufacturers and Wholesalers

1.0d*38mm,1.2d*38mm,1.4d*38mm.

* Packing: Can / Tin or Glass Jar

* Shape: Whole, Slices, PNS

* Material: Fresh Mushroom

* Flavor In Boild Water,In Marinated,In Brine,In Vinegar

* Ingredients of canned mushroom:

In Brine:Mushroom, Water, Salt

In Marinated: Mushroom, Water, Salt, Sugar, Vinegar And Spices.

* Origin: China






* Shelf Life: 3 Years

* MOQ: One 20ft Container

* Brand: FORTOP/OEM

* D.W could made as per clients requirements.

Three category accessories for choice:
1)child and adult breath nebulizer kit:nebulizer kit,child%adult inhalation mask,child%adult mouthpiece,2m tube,child&adult nosepiece
2)gynecology gas compression nebulizer kit
3)special nose nebulizer kit


5pcs/ctn
70x36x22.5cm

Unlike traditional ceramics that tend to be hard and brittle, Zirconia offers high strength, wear resistance, and flexibility far beyond those of most other technical ceramics. Zirconia is a very strong technical ceramic with excellent properties in hardness, fracture toughness, and corrosion resistance; all without the most common property of ceramics high brittleness. Its unique resistance to crack propagation and high thermal expansion make it an excellent material for joining ceramics with metals like steel. Due to Zirconias unique properties it is sometimes referred to as the ceramic steel.

BN Boron Nitride is often referred to as white graphite because it has a microstructure similar to that of graphite. However, unlike graphite, boron nitride is an excellent electrical insulator that has a higher oxidation temperature. It offers high thermal conductivity and good thermal shock resistance and can be easily machined to close tolerances in virtually any shape. After machining, it is ready for use without additional heat treating or firing operations.

In inert and reducing atmospheres, BN will withstand temperatures over 2,000°C. It is commonly used as an insulator in contact with tungsten and graphite electrodes at those temperatures. All Boron Nitride grades can be used in oxidizing atmospheres up to 750°C. It is not wet by most molten metals and slags and can be used in contact with most molten metals including aluminum, sodium, lithium, silicon, boron, tin, germanium, and copper.

Boron Nitride is available in a variety of solid grades, differentiated by binder and composite: BN-2000, BN-2300, BN-2800, BN-3000...

Alumina / Al2O3 is an excellent electrical insulator and one of the most widely used advanced ceramic materials. Additionally, it is extremely resistant to wear and corrosion. Alumina components are used in a wide range of applications such as electronics, pump components and automotive sensors. UNIPRETEC offers a variety of alumina compositions, including 92% Alumina, 95% Alumina, 96% Alumina, 99% Alumina, 99.5% Alumina and 99.8% Alumina.

Silicon carbide / SiC, exceedingly hard, synthetically produced crystalline compound of silicon and carbon. Its chemical formula is SiC. Since the late 19th century silicon carbide has been an important material for sandpapers, grinding wheels, and cutting tools. More recently, it has found application in refractory linings and heating elements for industrial furnaces, in wear-resistant parts for pumps and rocket engines, and in semiconducting substrates for light-emitting diodes.

Silicon Nitride / Si3N4 is a high performance ceramic that is extremely hard and has exceptional thermal shock and impact resistance. It surpasses most metals high temperature capabilities and has a superior combination of creep and oxidation resistance. Additionally, its low thermal conductivity and high wear resistance make it an excellent material that can withstand the toughest of conditions in the most demanding industrial applications. 

Zirconia / ZrO2 - Unlike traditional ceramics that tend to be hard and brittle, Zirconia offers high strength, wear resistance, and flexibility far beyond those of most other technical ceramics. Zirconia is a very strong technical ceramic with excellent properties in hardness, fracture toughness, and corrosion resistance. Its unique resistance to crack propagation and high thermal expansion make it an excellent material for joining ceramics with metals like steel.

Alumina / Al2O3 is an excellent electrical insulator and one of the most widely used advanced ceramic materials. Additionally, it is extremely resistant to wear and corrosion. Alumina components are used in a wide range of applications such as electronics, pump components and automotive sensors. UNIPRETEC offers a variety of alumina compositions, including 92% Alumina, 95% Alumina, 96% Alumina, 99% Alumina, 99.5% Alumina and 99.8% Alumina.

Silicon carbide / SiC, exceedingly hard, synthetically produced crystalline compound of silicon and carbon. Its chemical formula is SiC. Since the late 19th century silicon carbide has been an important material for sandpapers, grinding wheels, and cutting tools. More recently, it has found application in refractory linings and heating elements for industrial furnaces, in wear-resistant parts for pumps and rocket engines, and in semiconducting substrates for light-emitting diodes.

Silicon Nitride / Si3N4 is a high performance ceramic that is extremely hard and has exceptional thermal shock and impact resistance. It surpasses most metals high temperature capabilities and has a superior combination of creep and oxidation resistance. Additionally, its low thermal conductivity and high wear resistance make it an excellent material that can withstand the toughest of conditions in the most demanding industrial applications. 

Zirconia / ZrO2 - Unlike traditional ceramics that tend to be hard and brittle, Zirconia offers high strength, wear resistance, and flexibility far beyond those of most other technical ceramics. Zirconia is a very strong technical ceramic with excellent properties in hardness, fracture toughness, and corrosion resistance. Its unique resistance to crack propagation and high thermal expansion make it an excellent material for joining ceramics with metals like steel.

Alumina ceramic (Aluminum Oxide or Al2O3) is an excellent electrical insulator and one of the most widely used advanced ceramic materials. Additionally, it is extremely resistant to wear and corrosion. Alumina components are used in a wide range of applications such as electronics, pump components and automotive sensors. UNIPRETEC offers a variety of alumina compositions, including 92% Alumina, 95% Alumina, 96% Alumina, 99% Alumina, 99.5% Alumina and 99.8% Alumina, but the 95% Alumina and 99% are the most widely used materials. Alumina components can be formed by a variety of manufacturing techniques such as uniaxial pressing, isostatic pressing, injection molding and extrusion. Finishing can be accomplished by precision grinding and lapping, laser machining and a variety of other processes.Silicon nitrides (Si3N4) feature an excellent combination of material properties. They are nearly as light as silicon carbide (SiC), but their microstructure gives them excellent thermal shock resistance and their high fracture toughness makes them resistant to impacts and shocks.Unlike traditional ceramics that tend to be hard and brittle, Zirconia offers high strength, wear resistance, and flexibility far beyond those of most other technical ceramics. Zirconia is a very strong technical ceramic with excellent properties in hardness, fracture toughness, and corrosion resistance; all without the most common property of ceramics high brittleness. Its unique resistance to crack propagation and high thermal expansion make it an excellent material for joining ceramics with metals like steel. Due to Zirconias unique properties it is sometimes referred to as the ceramic steel.

Silicon Nitride (Si3N4) is a man made compound synthesized through several different chemical reaction methods. Parts made of Si3N4 are pressed and sintered by well developed methods to produce a ceramic with a unique set of outstanding properties. Silicon Nitride Ceramic is dark gray to black in color and can be polished to a very smooth reflective surface, giving parts with a striking appearance. The very high quality bodies developed for these demanding high reliability applications are available today and can be used in many severe mechanical, thermal and wear applications.What's more, Silicon Nitride Si3N4 is an electrical insulator and is not wet by nonferrous alloys. Silicon nitride is a rather expensive material, but its performance to cost benefit ratio is excellent in the applications where it can outperform the normally utilized materials with long life and very reliable low maintenance operation.Zirconium oxide (Zirconia) is an extremely tough ceramic with a hardness of >9 Mohs which makes it and excellent material for extreme wear, high temperature and harsh environment applications. Zirconia ceramics have remarkable properties of strength, hardness and wear resistance in addition to withstanding attack from molten metal, organic solvents, acids and alkalis. They can also withstand high temperatures for long periods even under severe mechanical stress. Typical Applications include: volatile chemical solutions transportation, jet and diesel engine components, containers for molten metals, high speed cutting tools, high wear components, transistor insulators, dental implants, bearing balls, pump seals, and ball valves. Contact us for more info!

Hexagonal Boron Nitride has the same type of layer structure as graphite and provides a very good lubrication/mold-release characteristic. BN is stable up to approximately 2000°C in the inert atmosphere.Besides, Boron Nitride is stable against most organic solvents and corrosive chemicals, and unwettable by most molten metals and glasses. Boron Nitride has high electrical insulation and voltage resistance at high temperature and no changes in permittivity and dielectric loss up to high-frequency area. As for its lubricity and mold-release efficiency, friction coefficient of Boron Nitride does not change up to considerably high temperature in nitrogen atomosphere, which enables use up to approximately 950°C in the air. What's more, because of high thermal conductivity and high heat radiation, BN can be applied to various kind of heat radiators.

Alumina / Al2O3 is an excellent electrical insulator and one of the most widely used advanced ceramic materials. Additionally, it is extremely resistant to wear and corrosion. Alumina components are used in a wide range of applications such as electronics, pump components and automotive sensors. UNIPRETEC offers a variety of alumina compositions, including 92% Alumina, 95% Alumina, 96% Alumina, 99% Alumina, 99.5% Alumina and 99.8% Alumina.

Boron Nitride / BN machinable ceramic is made by hot pressing Boron Nitride powders at high temperature and pressure. UNIPRETEC's Boron Nitride (BN) can easily be machined into rods, bars, plates and even intricate custom shapes.The unique combination of highly exceptional thermal, physical and chemical characteristics of BN Boron Nitride ceramic makes it ideal for solving tough challenges in a wide range of industrial applications. 

Silicon carbide / SiC, exceedingly hard, synthetically produced crystalline compound of silicon and carbon. Its chemical formula is SiC. Since the late 19th century silicon carbide has been an important material for sandpapers, grinding wheels, and cutting tools. More recently, it has found application in refractory linings and heating elements for industrial furnaces, in wear-resistant parts for pumps and rocket engines, and in semiconducting substrates for light-emitting diodes.

Silicon Nitride / Si3N4 is a high performance ceramic that is extremely hard and has exceptional thermal shock and impact resistance. It surpasses most metals high temperature capabilities and has a superior combination of creep and oxidation resistance. Additionally, its low thermal conductivity and high wear resistance make it an excellent material that can withstand the toughest of conditions in the most demanding industrial applications.

A960 Alumina offers consistently reliable and convincing performance even when subject to high thermal and electrical loads in terms of its: Thermocycling capability, Thermal shock resistance, Flexural strength, Surface quality, Thermal conductivity. This makes A960 Alumina Ceramic Substrates ideal for power electronics in conjunction with direct copper bonding (DCB) and active metal brazing (AMB).

ALN Aluminum Nitride - with outstanding insulating properties and extremely high thermal conductivity (â?¥ 170 W/mK), Aluminum Nitride is perfect for the extremely high performance required in the electronics industry. AlN ceramic enables the compact, affordable construction of components and hybrid designs with high integration density. Extraordinary mechanical strength and a low thermal expansion coefficient enable seamless system integration.

1.Quick Details
1Place of Origin:Fujian, China (Mainland)
2Type:Ceramic Parts
3Application:Industrial Ceramic
4Material:Alumina Ceramic, 92%,94%,96%,99% alumina
5Model Number:INC
6Brand Name:INNOVACERA
7Color:White/Ivory
8Density:3.8g/cm3
9Compressive strength:2500
10Flexural Strength:358Mpa
11Vickers Hardness:11-14 Gpa
12Maximum Use Temperature:1650°C
13Bulk density:3.1
14Thermal Conductivity:24.7
15Thermal Shock Resistance:200-250 TC

2.Appications
Aluminum ceramics are widely used in electronics and electrical engineering, metallurgical processes, chemical technologies, medical technologies, mechanical engineering, military equipment.
Aluminum ceramics are used for manufacturing insulators, capacitors, resistors, furnace tubes, sealing refractory parts, foundry shapes, wear pads, thermocouple protection tubes, cutting tools and polishing/grinding powders, ballistic armor, laboratory equipment, bio-ceramic parts for orthopedic and dental surgery, bearings.

3.We are a supplier of precision ceramics.
All products can be customized according to customer requirements.
my mail address isvivian@innovacera.com
If you want to know more products, please feel free to contact me.

New silicone masks are made of medical grade silicone because this is generally considered the material of choice for its superior ability to conform to the patient's facial anatomy. The field of application for the masks includes anesthesia and mask ventilation for pediatric and adult patients.

The masks are available in various shapes and sizes. The smaller sizes have a rather round shape in order to provide comfortable fit and effective seal for the faces of infants. The bigger sizes have an anatomically formed teardrop shape to ensure convenient fit and seal for facia contours of adult patients.

New silicone face masks have a flexible, soft and transparent mask body. The mask bodydesign provides a comfortable grip. Shape and material allow for safe handling by doctors and nurses. The silicone masks are reusable.


Crystal clear dome
for easy observation of the patient's condition

Dome with thumb rest and soft, shaped, airfilled cuff
allows a tight fit to the patient's face with an easy grip

Complete line with 6 different sizes
Neonate(0#), Infant(1#), Pediatric(2#), Adult(3-5#)
Proper size available for all patients

Supplied with hook ring
(except neonate and infant sizes) the mask is prepared for fastening by head strap. Hook ring can easily be removed if not needed

Disposable/single patient use
The combination of lower cost disposable materials and the single patient use concept, offers minimized risk of cross infection without need for establishing and maintaining resource consuming cleaning, disinfecting and sterilizing procedure

Specifications
Mask dome and cushion are made of PVC.
All sizes are delivered individually packed, non-sterile, in packs of 20 units

Feature
1.Transparent mask shell is convenient for observation in the mask vomit, bloodstained, natural breathing in patients
2.Mask joint is the standard diameter 22/15 mm (conform to standard: ISO5356-1).
3.The mask is made of silica gel material, conform to the requirements of the ISO10993 medical biological evaluation.
4.This product conform to the requirements of the eu MDD/directive 93/42 / EEC.
5.Latex free.
Basic information
Manual Resuscitator Mask
1. Materials: Silicone/LSR/PVC etc.
2.Sizes/Types: Neonate, Infant, Pediatric, Adult etc.
3.Materials Hardness: 15 Shore A -90 Shore A
4.Disposable Mask: PVC; Reusable Mask: Silicone/LSR.
5.Working Temperature: LSR: -20°C - 450°C; Silicone: -40°C- 230°C; PVC -10°C- 85°C

Composition: jc32s
Weight: 68"
Weight: 240g
Color¡êopurplish blue
Machine¡êojacquard
Usage: bag, bedding, blanket, home textile, shoes, toy
Keywords: jacquard, cotton jacquard, jacquard pattern.

Standard international packing.

Product: polyester interlock knitting fabric
Composition: 75d72f
Width: 70"
Weight:135g
Color: greenish yellow
Machine: interlock-rib
Usage: lining, garment, home textile, suit, underwear
Keywords: interlock, knitting fabric, interlock-rib

Standard