Find Verified Laboratory Chemicals Suppliers, Manufacturers and Wholesalers

Laboratory Hot Plate With N ylon+GF Work Plate Material

Product Name: Glycidyl Methacrylate (gma)
CAS: 106-91-2
MF: C7H10O3
MW: 142.15
EINECS: 203-441-9
Usage: Mainly used in powder coating, thermosetting coating, fiber treatment agent, adhesive, antistatic agent, vinyl chloride stabilizer, rubber and resin modifier, ion exchange resin and adhesive for printing ink.

Product Name: Phosphorous Acid
Molecular Formula: H3PO3
UN No.: 2834
Molecular Weight: 82.00
CAS No.:13598-36-1 or 10294-56-1
Usage: Phosphorous acid is mainly used in the production of phosphates, synthetic fibers and organ phosphorus pesticides, etc. It is also used in producing high performance water treating agent ATMP.
Package: 25kg, 500kg or 1000kg woven bag for phosphorous acid crystal;
280kg/HDPE drum, 1400kg/IBC for phosphorous acid solution.

Properties: The product is a white powder, density: 2.498g/cm-3,able to flow freely, melting point (decomposition temperature)£º350¡£C £¬slightly soluble in water and hot alcohol.

Uses: It' s used in the preparation of fluxes required by metal processing industries, for metal surface treatment, and in the manufacture of aluminum£¬titanium and boron alloys. It's also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.


Packing£ºIn polyethylene bag woven plastic sack, 250kgs or 100kgs net each.

ASTM E595-15 Outgassing test - Test Standard

ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

ASTM E595-15 Outgassing test - Test Requirement

CVCM collected volatile condensable materials 0.1%
TML total mass loss 1%
WVR the amount of water vapor regained

Outgassing test ASTM E595 - Test Conditions

Pre Condition: 73 F/ 50% RH (24Hours) ; Post Condition: 73 F/ 50% RH (24Hours)

This test method describes the test apparatus and related operating procedures for evaluating the mass loss of materials being subjected to 125 C at less than 7*103 Pa for 24 h. The overall mass loss can be classified into noncondensables and condensables. The latter are characterized herein as being capable of condensing on a collector at a temperature of 25 C.

ASTM E595-15 Outgassing test Brief

Many types of organic, polymeric, and inorganic materials can be tested. These include polymer potting compounds,foams, elastomers, films, tapes, insulations, shrink tubings,
adhesives, coatings, fabrics, tie cords, and lubricants. The materials may be tested in the as-received condition or prepared for test by various curing specifications.

More about Outgassing test ASTM E595,please contact us :

Place of Origin:
Fujian, China
Brand Name:
Uwater (OEM acceptable)
Model Number:
ULS002-1
Product name:
personal Water Filter Straw of camping
Material:
Disruptor
Function:
Remove Virus, Bacteria, Spore
Filtration Efficiency:
99.9999%
Use:
Water Purifiers
Heat-resistance:
0�°C to 60�°C
Application:
Life straw
Certificate:
LFGB, BPA free, EN71
Size:
OD 30 mm
Color:
customization

GB 8410(Chinese Standard) Flammability Test to Motor Vehicle

CASfire Technical Co.,Ltd have rich experience to provide GB8 410 Flammability of automotive interior materials.

GB8410 Scope

This Standard specifies the technical requirements and test methods for the horizontal flammability of automotive interior materials.
This Standard applies to the assessment of automotive interior materials.
As automotive interior parts (positions, layout and application conditions of the parts, ignition sources, etc.) differ considerably from the test conditions specified in this Standard, this Standard does not apply to the assessment of all the actual flammability of automotive interior materials.

GB8410 Technical requirementsï¼?

The flammability of interior materials must meet the following technical requirement:
The burning rate is not greater than 100 mm/min.

GB 8410 Test methodï¼?

Fit the sample horizontally on a U-shaped support then ignite the free end of the sample on a flame of the specified height in the combustion box. 15 seconds later, determine whether the flame on the sample goes out or at what time it goes out, the burnt distance of the sample, and the time used in burning this distance.


GB 8410 - Relative Standard

FMVSS 302 Flammability of Interior materials
SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method
TL1010: Flammability
ISO 3795:Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
DIN 75200:Determination of burning behaviour of interior materials in motor vehicles
95/28/EC: The burning behaviour of materials used in the interior construction of certain categories of motor vehiclesâ??, and is intended to ensure that they meet fire safety standards
NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test.
U.T.A.C 18-502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles
BMW N 60121.0: BMW standard
DBL 5307: Benz Standard
GM L-T06-302G-79: GE Standard
Mitsubishi ES-X60410: Oxygen Index
VW TL 1010: burning behaviour
Volvo STD 5031: burning behaviour

Web:http://www.casfire.cn
E-mail:info@casfire.cn

- Standard

TB/T 3237 Flame retardant technical specification of decorating materials for multiple unit train

Test Method

GB 2406 Oxygen index test
UIC 564 Combustion test
GB 8323 Smoke density test
TB 3237 Part 4.4 Smoke toxicity test

Reference Standard

GB/T 2406.2 Plastics - Determination of Burning Behavior by Oxygen Index
GB/T 10707 Rubber - Determination of the Burning
GB/T 8323.2 Determination of Optical Density by a Single-chamber Test
UIC 564-2 Regulations relating to fire protection

GI100SW Zealway GI series vertical autoclave. 29L/54/80L/100L Max temperature: 135. Hand wheel opening LCD screen Programs memory USB port F0 value calculation 5 level authority Auto start up timer 3Q calibration port Printer/floating sensor/digital pressure sensor/auto fill/auto drain can be added.

solid acrylic resin for paper packaging inks,pigment dispersions

It is specially designed for aqueous inks to print on decorative paper,waterproof paper,plastic film,etc. The product is provided in solid form and is neutralized and dissolved to form varnish before use.

Technical Index:
Appearance:Transparent Solid
Solid Content(%):>99%
acid value:238
Softening Point(â??):105
Average Molecular Weight:1700
Tg(â??):56

Resin Properties:
Low Molecular Weight;
Excellent Permanence of Gloss;
Good Anti-sticking

Series of Resin Properties:
(1) The resin performance is closer to the design requirements because complete polymerization effectively reduces the monomer residue content.
(2) Special film former is grafted to the resin during polymerization to provide more outstanding film forming property,keep a higher glass transition temperature and eliminate the contradiction between film formation and temperature resistance.
(3) It enhances the solubility of resinol solutes,so it can be used as binder for solute oil production.
(4) It can be used for emulsification protection in acrylic acid emulsion polymerization because of its good emulsibility and stability.
(5) It can be used as main ingredient for production of aqueous glaze oil because of its excellent transparency,film forming property and high gloss.

Series of Resin Applications:
(1) It can be used as grinding resin to easily produce the colour paste with high pigment content because of its outstanding pigment wettability and color development,especially better black carbon,white titanium pigment,phthalocyanine and azo pigment dispersibility.
(2) It can be used alone as binder for aqueous ink or solvent ink because of its excellent film forming property.
(3) Because of its good adhesion to clean surface,the aqueous ink made from it can be used to print on coating paper and art paper,and the solvent ink made from it can be used to print on smooth base material.
(4) It applies to high speed print because of its good print comfortability and fast dry speed.
(5) It is very miscible with other aqueous resin and acrylic acid emulsion.
(6) It has good water resistance.


Applications:
Pigment grinding;varnish;Water based ink with high gloss and solid content
(1) It is used as high grade aqueous ink or solvent grinding resin
(2) It is used for production of production of aqueous ink to print on decorative paper,waterproof paper,plastic film,etc.
(3) It is used as resin for grind resin for solvent ink.
(4) It is used for supporting ink for acrylic acid emulsion.
(5) It is used for production of water-borne light oil.

Fly ash are produced principally at coal-fueled electric power plants , which is one of the residues generated in the combustion of coal. Owing to its pozzolanic properties, fly ash is used as a replacement for some of the portland cement content of concrete. It can improve concrete performance, making it stronger, more durable, and more resistant to chemical attack. The reuse of fly ash also creates significant benefits for our environment.



(1)no mark or mark as client's requirment
(2)plastics woven bag
(3)1mt/bag or at your requirement

(1)densified and undensified silica fume
(2)concrete application and refractory application
(3)amorphous sio2 :85-98%
(3)light grey and dark grey

(1)1mt/bag or at client's requirement
(2)plastics woven bag
(3) n/m or mark as client's requirement

Key Attributes





Material
Silicone


Place of Origin
Fujian, China


Brand Name
XPRO/ODM


Model Number
XPG701F


Product Name
Full Gas Mask


Material
Food Grade Silicon


Function
Anti-gas


Color
OEM


Application
Chemical Industry


Feature
Strong Protection


Type
Head-wearing


Packaging
1PC/color box, 16boxes/Ctn


Logo
Accept Customized Logo


Style
Full Face






Packaging and Delivery





Port
XIAMEN






Supply Ability





Supply Ability
5000 Piece/Pieces per Month