Copper foil tape uses copper foil as substrate and single sided coated with conductive acrylic adhesive.It can be divided into: self-adhesive copper foil, double conductive copper foil tape , single conductive copper foil tape.Features: temperature resistance , strong adhesion , good conductivity , excellent shielding performance and easy die-cutting.
Mainly apply on all types of transformers, mobile phones, computers, pda, pdp, lcd monitors, notebook computers, copiers and other electronic products where electromagnetic emi shielding is demanded.
Grade P1020, A7, A8, A85, ADC12
Origin Malaysia, Australia, South Africa, India, Russia, Middle East
Brand Press Metal/Tomago/Portland/Boyne/Hindalco/Vedanta/Rusal/Alba/Maaden/Sohar/Hillside
Cube2--c17200 (cda 172) beryllium copper is the most commonly utilized copper beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches rockwell c45. Meanwhile, the electrical conductivity is a minimum of 22% iacs in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures.
Typical application for c17200 beryllium copper alloys:
Electrical industry: electrical switch and relay blades, fuse clips, switch parts, relay parts, connectors, spring connectors, contact bridges, belleville washers, navigational instruments, clips
Fasteners: washers, fasteners, lock washers, retaining rings, roll pins, screws, bolts
Industrial: pumps, springs, electrochemical, shafts, non sparking safety tools, flexible metal hose, housings for instruments, bearings, bushings, valve seats, valve stems, diaphragms, springs, welding equipment, rolling mill parts, spline shafts, pump parts, valves, bourdon tubes, wear plates on heavy equipment, bellows
Available sizes:
Custom diameter & sizes, random mill lengths
Available products (forms):
Round bars, round strips, round wires, round tube,
Flat bars, square bars, rectangular bars, hexagon bars, plates, sheets, coils
Custom shapes are available upon request.
Cube2pb--c17300 (cda 173) the leaded beryllium copper is identical to a version of lead-containing alloy c17200 and achieves the same exceptional strength after hardening. C17300 rods contain a small amount of lead to provide an alloy tailored for automatic machining operations and the lead promotes formation of finely divided chips thus extending cutting tool life.
Typical application for c17300 leaded beryllium copper alloys:
Electrical industry: switch parts, relay parts, electrical connectors, fuse clips, contact bridges, electrical motor components, navigational instruments, electrical switch and relay blades.
Fasteners: washers, fasteners, lock washers, retaining rings, roll pins, screws, bolts
Industrial: bushings, non-sparking safety tools, shafts, pumps, springs, welding equipment, rolling mill parts, spline shafts, pump parts, valves, bourdon tubes, bellows, electrochemical springs, flexible metal hose
Available sizes: Custom diameter & sizes, random mill lengths
Available products (forms):
Round bars, round wires, round tube
Flat bars, square bars, rectangular bars, hexagon bars, plates
Custom shapes are available upon request.
Cuco217500 (cda 175) cobalt beryllium copper is primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a cobalt alloying addition (2.40-2.70%). C17500 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and rb 100 respectively.
Typical application for c17500 cobalt beryllium copper alloys:
Electrical industry: fuse clips, switch parts, relay parts, connectors, spring connectors
Fasteners: washers, fasteners
Industrial: springs, seam welding dies, resistance welding equipment, resistance and spot welding tips, tooling for plastic moulds, die casting plunger tips.
Available sizes:
Custom diameter & sizes, random mill lengths
Available products (forms):
Round bars, round wires, round tube,
Flat bars, square bars, rectangular bars, hexagon bars, plates, sheets, coils
Custom shapes are available upon request.
Cuni217510 (cda 1751) nickel beryllium copper is the mirror image of alloys c17500 in terms of its properties & characteristics. C17510 is also primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a nickel alloying addition (1.40-2.20%). C17510 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and rb 100 respectively.
Typical application for c17510 nickel beryllium copper alloys:
Electrical industry: fuse clips, switch parts, relay parts, connectors, spring connectors, instruments parts
Fasteners: washers, fasteners
Industrial: springs, thermal transfer plates, welding equipments, high flux electromagnets, die casting plunger tips.
Available sizes:
Custom diameter & sizes, random mill lengths
Available products (forms):
Round bars, round wires, round tube,
Flat bars, square bars, rectangular bars, hexagon bars, plates, sheets, coils
Custom shapes are available upon request.
Product Name: copper tube
Material: T2 TP2 TU2
Specification: 10-1000mm
Grade: C12000 /C11000
Length: as required
Cu (Min): 99.90%
Alloy Or Not: Non-alloy
Ultimate Strength (MPa): 205
Elongation ( %): 40
Wall Thickness: 0.2-60mm
Outside Diameter: 11-800mm
Place of Origin: China
Package: standard export packing
Shape: round
Payment term:T/T,L/C etc.
Application:
1 Air Conditioner and Refrigerator
2 Water tube service and distribution
3 Fire Protection, Solar, Fuel/Fuel Oil
4 Natural Gas, Liquefied Petroleum (LP)Gas
5 HVAC, Snow Melting, Drain, Waste, Vent Piping
6 Re-drawing usage
7 High conductivity use
8 Cable Lugs and Termainals
9 Electric Connectors
10 Lighting industry
Yuanjinghe conductive copper tape is made of thin pure copper foil backing with a conductive acrylic pressure-sensitive adhesive and a protective release paper backing over the adhesive.
The flat copper tape is extremely flexible to be taken on nearly any shape, and with the high electron concentration and mobility of copper, the tape can carry current, just like a wire.And the conductive copper foil tape are heat-resistant, waterproof, antistatic, artistic ceiling, freon-proof and aseptic, which make the copper tape uses widely.
Yuanjinghe adhesive tape co., ltd is specialized in manufacturing conductive copper tape, our engineers to make the tape from 2008. We supply the customized services, our daily output can be up to 100, 000 square meters, all of the copper tapes are satisfy to the requires of reach, rohs compliant and halogen free.The conductive copper tape is not only suitable for domestic market, but also the european, american, african, asian and the middle east markets.
There are four reasons to choose us:
1.High quality adhesive tape with competitive prices.
2.Shorted delivery time:5-15 days.Urgent and huge orders are welcome.
3.Free samples.
4.Record and maintained secrecy about the information of customers’ samples or orders.
Thank you to read the detail about yuanjinghe conductive copper tape, if you would like more information or samples, please feel free to send the email to info@yjhtape.Com or leave us a message!
Yuanjinghe Slug and Snail Copper Tape is made of thin pure copper foil backing with a non-conductive acrylic pressure-sensitive adhesive and a protective release paper backing over the adhesive.
Yuanjinghe Slug and Snail Copper Tape Date sheet:
Item
YJH-CT1120
Color Copper
Material Copper Foil
Adhesive Acrylic
Thickness 0.06 mm
Width 23mm,28mm,30mm,40mm,50mm
Length 8m
Application Temperature -20?~120?
Storage Condition 20?,65% RH
Yuanjinghe Slug and Snail Copper Tape is easy to apply,long lasting deterrence to slugs and snails,and it is also safe for children,pets and wildlife.There are some good performance for the copper tape:good viscosity,cold resistance,mechanical resistance,moisture resistant,oil & acid resistant,aging-resistant,flame retardant and easy to tear apart.
Prevent slugs and snails principle: when slugs and snails climbed onto a copper foil, their secrete liquid reacts with the copper to produce a mild natural charge, the unpleasant feeling of shock that make the slugs and snails turn to find a easier road,evacuated from the pot.This is a long lasting,non toxic way of detering slugs and snails.
Yuanjinghe Slug and Snail Copper Tape-8M self adhesive copper tape
Yuanjinghe Adhesive Tape co.,Ltd is specialized in manufacturing slug and snail copper tape,our engineers to make the tape from 2008. Our daily output can be up to 100,000 square meters,all of the copper tapes are satisfy to the requires of Reach,RoHS compliant, and Halogen free.The slug and snail tape is not only suitable for domestic market,but also the European,American,African,Asian and the Middle East markets.
There are four reason to choose us:
1.High quality adhesive tape with competitive prices.
2.Shorted delivery time:5-15 days.Urgent and Huge orders are welcome.
3.Free Samples.
4.Record and Maintained secrecy about the information of customers’ samples or orders.
704 Copper Sheet Scrap Suppliers
Short on time? Let Copper Sheet Scrap sellers contact you.
