Find Verified Embedded Systems Suppliers, Manufacturers and Wholesalers

Features:
Image Mode: B, 2B, 4B, M, B/M, CDFI, CDE, CCD, PW, CW.
Advanced Technology: 3D image supported.
One key image optimization: various of inner checking types/checking types edition and creation/making superior image by pressing
of doctor according to different checking types.
English guide system: real time notice of operation steps, helping doctor get familiar with the operation of device quickly.
Auto freezing protection of the probe: auto freeze the probe in the presetting time, lengthen the life of the probe.
English report system: record the calculating parameters automatically, output English report directly; make the inspection steps much
more efficient.
Expansion port: Video port, S-Video port, RS-232 port, USB2.0 port, VGA port, DICOM3.0 port
Probe supported
Convex probe, vaginal probe, linear probe, phrased array probe; micro convex probe

Motorcycle security alarm system

Features
Million sets of rolling codes
Water-proof (main machine, horn and remote control)
M security seting
Remote xontrol vibration sensitivity
Prevent wire cutting and power off never lasting memory
Remote control for engine stalling
Multi-track surrounding horn
Car searching and alarming in parking lot
Upgrade version
Code learing :
Change remote
Controller randomly
Start key
No sound is better
In given situation
Sensitivity:
The remote controller can
Have the sensitivity adjust
Powe off memory
Thief cannont really steal it.

Car digital anti-theft system

Model no.Ah-fd007
Price:105rmb(exw)
Min quantity:100 sets
Sample price:120rmb/sets

Product description
General
--128 arrays, 32 transmitting and receiving channels
--scanning mode: convex/linear/micro-convex
--imaging mode: b, b+b, 4b, b+m, m
--transducer connector: 2 (standard)
--scanning depth: 40-250(depending on transducer)
--cine-loop: 2000 frames, several frames(b, 2b, 4b, 9b) can played simultaneously, also support b/m, m mode
--image conversion: up/down, left/right, black/white
--8 segment tgc adjustment, gamma correction, stat, histogram,
--probe selectable: convex, linear, micro-convex, transvaginal, rectum

Display:
--10 inch b/w svga monitor
--display: date, time, name, sex, age, doctor, hospital, annotation, probe name, probe fequency, measurement values, body marks etc.

Standard configuration:
R60/3.5mhz convex(2.5/3.5/6.0mhz)
10 inch b/w svga monitor, usb2.0 port

Optional:
-- r13/6.5mhz transvaginal concex(5.0/6.5/8.0mhz)
-- r20/5.0mhz micro-convex(2.5/3.5/6.0mhz)
-- 7.5mhz linear(6.5/7.5/12.0mhz)
-- 6.5mhz rectum linear(5.0/6.5/8.0mhz)
-- ink jet printer, laser printer, video printer, video recorder
-- trolley, puncture frame




Size & weight:
N. W.: 11.5kg (inc. One probe) g. W.: 13.5kg
Dimensions: 355mm(w)x315mm(l)x255mm(h)
Meas: 425mm(w)x395mm(l)x410mm(h)

Product description
General
--scanning mode: convex/linear/micro-convex
--fluorescent key board for working in dark room
--imaging mode: b, b+b, 4b, b+m, m
--gray scale: 256
--transducer connector: 2 (standard)
--beam-forming: dbf digital beamformer

Rdf real time dynamic filtering
Dfs dynamic frequency scanning
Rda real time dynamic aperture
Dfr dynamic receiving focusing

--scanning depth: 40-240(depending on transducer)
--cine-loop: 819 frames(max)
--image pemanent storage: 32 frames (min)
--image conversion: up / down; left / right; black / white
--probe selectable: convex, linear, micro-convex, transvaginal, rectum

Image processing
--scanning angle adjustment
--probe automatic identify
--digital encoder knobs
--gamma corrections, stat, histogram
--16 grades scanning depth adjustment 8 segment tcg adjustment
--automatic report generation(normal/ob) 80 arrays transducer

Standard configuration:
--r60 / 3.5mhz convex(2.5/3.5/5.0mhz)
--15 inch b/w svga monitor
--usb2.0 port

Optional:
--r13 / 6.5mhz transvaginal concex(5.0 / 6.5 / 7.5mhz)
--r20 / 5.0mhz micro-convex (2.5 / 3.5 / 5.0mhz)
--7.5mhz linear(6.5 / 7.5 / 8.0mhz)
--6.5mhz rectum linear(5.0 / 6.5 / 7.5mhz)
--video printer, puncture frame




Size & weight
N. Weight: main frame 38.0kg / monitor 6.5kg
G. Weight: main frame 52.0kg / monitor 8.0kg
Dimensions: main frame 660mm(w)x510mm(l)x950mm(h) monitor: 0.025m3
Meas: main frame 720mm(w)x570mm(l)x1015mm(h) monitor: 0.065m3.

Product description
General
--scanning mode: convex / linear / micro-convex
--imaging mode: b, b+b, 4b, b+m, m
--gray scale: 256 p
--fluorescent key board for working in dark room
--transducer connector: 2 (standard)
--beam-forming: dbf digital beamformer

Rdf real time dynamic filtering
Dfs dynamic frequency scanning
Rda real time dynamic aperture
Dfr dynamic receiving focusing

--scanning depth: 40-240 (depending on transducer)
--cine-loop: 819 frames (max)
--image pemanent storage: 32 frames (min)
--image conversion: up/down; left/right; black / white
--probe selectable: convex, linear, micro-convex, transvaginal, rectum

Image processing
--scanning angle adjustment, probe automatic identify, digital encoder knobs, gamma corrections, stat, histogram 16 grades scanning depth adjustment, 8 segment tgc adjustment, 128 arrays transducer

Measurement& calculation
Measurement: distance, circumference, area, volume, ef rate, heart rate
Obstetric measurement: bpd, gs, crl, fl, ad, hc, ac, edd, ga, fw etc
Body marks: no less than 40 marks
Application/software package: abdominal,
Ob/gyn, urology, pediatrics cardiology, small parts.

Display:
10 inch b/w svga monitor
Date, time, name, sex, age, doctor, hospital.
Annotation; probe name, probe frequency
Measurement values, body marks etc.
Standard configuration:
R60/3.5mhz convex(2.5 / 3.5 / 5.0mhz)
10 inch b/w svga monitor, usb2.0 port

Optional:
R13/6.5mhz transvaginal concex(5.0 / 6.5 / 7.5mhz)
R20/5.0mhz micro-convex(2.5 / 3.5 / 5.0mhz)
7.5mhz linear(6.5 / 7.5 / 8.0mhz)
6.5mhz rectum linear(5.0 / 6.5 / 7.5mhz)
Video printer, trolley, puncture frame




Size & weight:
N. W.: 11.5kg (inc. One probe) g. W.: 13.5kg
Dimensions: 355mm(w)x315mm(l)x255mm(h)
Meas: 425mm(w)x395mm(l)x410mm(h)

Application:
Abdomen, obstetrics, gynecology, heart, urinary system, small organs, superficial, blood vessels, pediatrics, newborns, musculoskeletal

A solar power plant is based on the conversion of sunlight into electricity, either directly using photovoltaics (PV), or indirectly using concentrated solar power (CSP). Concentrated solar power systems use lenses, mirrors, and tracking systems to focus a large area of sunlight into a small beam.

1) Introduction:
Gasboardâ??5020 can be used for measurement of the concentration of automobile emission gas CO ,CO2 ,HC ,O2 and NO (optional), based on NDIR technology. This analyzer is designed with portable and smaller physical dimensions. The general application is for automobile emission check station or car repair garage.
3) Features:
.Proprietary Infrared(NDIR) gas sensor
.Can measure gas concentration of CO ,HC ,CO2 ,O2 ,NO (optional) simultaneously
.With 320*240 LCD real time display
.Air/fuel ratio calculation and display automatically.
.Auto-zero calibration with air
.Oil temperature and RPM interface.
.Plug in Printer optional.
.RS-232 interface and optional software.

Model: rnts032
Light intensity: 120 lumens per bulb
Solar panel: 10w solar capacity, polycrystalline
Light time: 20 hours led light from a full battery charge
Features: hps
Will power 3 bulbs for up to 20 hours
Includes 1 usb mobile phone charging port
Battery checker
10w solar panel
Can be fully charged via the solar panel within 4 hours
Can be placed on a or wall mounted
Wired bulb
High/low mode light function
Built-in hook for hanging the bulb
Unit size: hps 164x105x45mm
Certification: lighting global an ce certification available

Product description
Partial discharge inspection instrument is a digital partial discharge charged detection instrument designed by our company based on years of experience in partial discharge measurement. It adopts two emerging technologies, ultra high frequency (UHF) measurement and ultrasonic (US) measurement. This system uses modern electronic and computer integrated technology to realize signal amplification, filtering, data acquisition, data processing, partial discharge parameter calculation, map drawing, and automatic generation of test reports, thereby completing the intelligent measurement and analysis of partial discharge. This device adopts handheld design and Wince system development; the device is lightweight, convenient to carry, fast to measure, and easy to use on the spot; it has friendly interface, simple operation, and high refresh rate; and the device has complete functions, strong anti-interference ability, and accurate measurement. This instrument has no damage to the power equipment to be tested during the testing process, and has no impact on the operation of the equipment. According to the maps obtained by the multiple detection modes of the UHF and US methods, the diagnostic analysis of the detection of insulation defects or hidden dangers of power equipment can be performed to clearly determine the operating status of the power equipment.



Technical index

Host parameters

Number of interfaces

2 interfaces 1 UHF interface 1 US interface

Sampling accuracy

12bit

Way of synchronization

Internal synchronization,External synchronization,

Light synchronization

UHF parameters

Measurement frequency range

300MHz-1.5GHz


Output method

Output with SMA head

Receiving method

Receive with antenna

Transfer method

Coaxial cable

Sensitivity

70dB

Mean sensitivity

50dB

Dynamic Range

80dB

Hardware

Display screen

4.3 TFT true color LCD screen

Resolution

480 272

LDT-N200 Ladle Integrated Management System

Overview:

In the steelmaking production process, the ladle is the key equipment for holding molten steel, secondary refining, and continuous pouring. In a modern steelmaking plant, refractory materials are required for converters, refining, and ladles. In the steelmaking process, ladle is the most important part in the use and consumption of refractory materials. Improving the service life of ladles and reducing refractory consumption is the key technology for steelmaking plants to save costs and reduce energy consumption for green production.

In order to ensure the orderly operation of the ladle, save the consumption of refractory materials, prolong the service life of the ladle, and ensure the safe operation of the ladle, Wuhan CenterRise M&C Engineering CO. developed and launched the LDT-N200 integrated management system for the ladle.



Introduction:

LDT-N200 ladle integrated management system integrates LDT-L200 ladle lining thickness gauge, TBP-S300 ladle, tundish baking temperature and leakage monitoring system, RFD -C100 metallurgical electronic positioning system, and also integrates SQL Server database and NeuralWare (American computer software company) neural network software NeuralWorks to realize intelligent and optimized management of ladles.

LDT-L200 ladle lining thickness gauge uses a laser area array scanning sensor to accurately measure the real-time thickness of the ladle lining, calculate the lining loss, and predict the service life of the ladle.

TBP-S300 ladle, tundish baking temperature and leakage monitoring system uses infrared thermal imaging camera and embedded armor wire system to comprehensively monitor and prevent ladle leakage.

RFD-C100 metallurgical electronic positioning system installs RFID electronic tags on all ladles to realize full-time and full-space ladle positioning and tracking.

LDT-S200 ladle optimization control and analysis software, based on SQL Server database, B/S network structure, realizes online management of ladles, and adopts BP neural network system to realize intelligent optimization control of ladles.

LDT-N200 ladle integrated management system can realize ladle age management based on ladle lining data and neural network algorithm, safety process control of ladle turnover and use, full-time tracking management of steelmaking production and full-space tracking management of ladle use and provide optimal control and management of steelmaking production and ladle maintenance. Comprehensive ladle measurement and monitoring, ladle positioning and management, and data management and optimization enable the LDT-N200 ladle integrated management system to fully realize ladle entire process management, optimize the service life of ladles, and comprehensively reduce the cost of refractory materials.

Brief introduction: The at-ii wireless temperature monitoring system comprises the wireless temperature sensor, the wireless temperature display and the computer that is installed the software of wireless temperature monitoring system. Wireless temperature sensor is installed to surface or inside of object to survey temperature of the object. It transmits temperature data to wireless temperature display via rf in local. The wireless temperature display receives and displays the data, and uploads the data to the computer by rs485 or network. The display sends sound and light alarm as soon as it receives abnormal data. The system software is installed on the computer, conducting online monitoring remotely and other functions.



Application fields:
Equipments in power plant, substation, such as switchgear, transformer, cable tray, reactor, etc.
Tank, electric motor for chemical industry and steel industry
Large warehouse, storeroom
Computer room, communication room, control room
Power traction, important enterprise electromechanical equipments
Other closed, rotated places or places that cannot lay the cables




Export standard packing: carton box or wooden case