The medical application of CO2 laser is based on the principle of Photo-thermal Ablation. Once the CO2 laser is delivered to the soft tissue, the light energy is absorbed by the water inside the biological soft tissue. By heating up and vaporizing the water, the biological tissue is torn apart. In order to minimize heat convection to surrounding tissue and collateral heat damage, the duration of the laser beam on the tissue can be controlled under 1 ms.
The CO2 laser system delivers an intense infrared light beam with 10600 nanometers wavelength which can be absorbed by body tissue (no matter what color the skin is) almost by 100%. This specific wavelength has a dramatic effect to biological soft tissue. Our CO2 surgical laser system uses state-of-the art technologies and is designed to cut, vaporize, burn, and solidify tissue for different clinical surgery procedures. At the same time our laser system uses controlled pulses of light to precise ablate, cut or remove target tissue by vaporizing tissue. It has been proven to be reliable and easy to operate and it is totally different from traditional surgical tool.
Application:
Dermatology : The double-eyelid, eye surgery, face and other parts of the grinding wrinkles, the grinding of a variety of scars, pigmentation of the hair transplant surgery hemorrhoids, warts, freckles, and tumor. ENT: rhinitis, turbinate hypertrophy, nasal polyps, pharyngitis etc. Dental : leukoplakia, glandular cheilitis, mucinous cyst, sublingual gland cyst. Gynecology : cervical erosion, cervical polyp, cyst. Surgery : external hemorrhoids, anal fistula, circumcision, genital warts, underarm odor, etc. Physiotherapy : cervical spondylosis, frozen shoulder, ulcers.
Features:
*True LCD touch screen micro-computor control system,user-friendly design,easy for operation.
*SFDA & CE medical
* Steady and stable Laser Beam Quality
* User-friendly Graphic Interface
* Safety protection with automatic alarm
* 360 degree rotation with 7-joints articulate arm
* Micro-computer control,high definition of laser beam
Technical Specifications:1. Laser TypE:Pco15-bc02(sealed off) 2. Wave Length: 10600nm 3. Laser Mode: Low-order modes 4. Output Power: 1~30w. cont. Adjustable 5. Laser Operation Modes: CW, Single Pulse, Repeat Pulse, Ultra Pulse 6. Tissue Exposure Modes: Continuous, Single Pulse, Repeat Pulse, Pulse 7. Ultra-pulse Frequency: 10~990Hz, Ultra-pulse Duration: 0.1~1.7ms
8. Continuous, time, repeated pulse 0.05, 0.1, 0.2, 0.5s
9. Aiming Beam: 5 mW 670nm Diode Laser (Light adjustable)
10. Beam Delivery System: 7- joint Spring- Balanced Articulated
11. Cooling system :Sealed of water circulation system
12. Control System: Microprocessor Controlled
13. Smoke Emission Smoke-blowing system inside
14. Operating Control Footboard switch
15. Input Power: 110V AC/ 60Hz or 220V AC/ 50Hz.
Therapy Principle
Use the selective absorption characteristics and the high peak value bursting effects of the laser beam to reach the therapeutic purpose.This therapy instrument uses the most advanced Q-switch technology which makes the laser energy released at a very short time, then forms a high peak power giant pulse. The pigment granules will rapidly expansion and breakdown after absorbed such huge laser energy in short time, and the cell framework will be fully preserved and repaired quickly, This could treat the pigment tissue and almost has no destructive to the normal tissues
Product Characteristics
1. With dual-wavelength, terminal output power is tested by the SFDA testing center, the test result is 1064nm, 1000mJ;532nm, 500mJ. New international 7 articulated light conducting arm, only available on this system within china territory.
2. International purchasing components (Q switch and Polarizer is supplied by the international famous company)with good performance, the laser cavity mode selecting technique which makes the output laser beam has good light spot mode, light spot light intensity uniformly distributed and no hot light spot.
3. High purity green light with good therapy results.
4. Equipped with 7-joints light conducting arm, with energy and density automatically adjust rod. Easy to operate.
5. Encapsulated mechanical parts, with moistureproof, dust proof and deformation proof functions. Thus make sure the laser¡¯s life span longer, with less maintenance cost and better performance
6.Intelligent Cooling System , Excellent water cooling with intelligent alert system, more safety and longtime reliable working 7.8.0" TFT color touch screen and arm with diode laser beam guide, easy for operation
8. CE approval
Therapy Scope
1. The laser wavelength of 1064nm applied to black pigment and blue pigment lesions located on the dermis, such as black tattoo, blue tattoo and tattoo eye line, and so on. Long pulse in non Q switched mode-to improve chloasma, large pores visible, remove fine wrinkles, smooth white skin and enhance skin elasticity.
2. The laser length of 532 nm applied to the red, yellow and brown pigment lesions and other colors pigment lesions located on the skin surface and small area lesions therapy, such as pigmentation on the skin surface, freckles removal
Therapy Characteristics
Strong power output make big spot size treatment available, and with adjustable power supply, spot size adjustable too.
Pulse width less than 8ns, peak value can reach to hundreds omen, it is very effective when using to remove some deep-skin tattoo and Ota's nevus.
Q-switch:yag laser quick remove tattoo, Amazing treatment resultsQ7 adopts the active EO Q-switch module with unique resonator technology to get stable high energy laser output. The giant laser pulse has only 6-8ns pulse width which produced the mega-watts level high peak power!
With our special housing and hardware platform, Q7would be used in different application environment .It s very useful for some high humidity.
Q7 Q-switched mode could produce high peak power pulse laser with ¡°ns¡± level narrow pulse width. It's helpful for the pigment disintegration without any side-effect. All the action is in a single pulse rather than coming from multi-pulse which will lead to longer effect time on skin.
Main Technical Parameter
Laser type Nd: YAG laser (Electro-Optic Q-Switched output mode & long pulse 0.3ms output mode)
Laser wavelength1064nm/532nm
Optical beam transmission7 joint light conducting arm, transmission efficiency more than 75%
Light spot diameter with spot size adjustable therapy handpiece, light spot size adjustable from 1~7mm; with parallel light handpiece, spot diameter is 10mm
Laser aiming red semi-conductor aiming beam, wavelength 650~670nm
Laser pulse width 6~8ns
Single pulse energy 1000mJ(1064nm)/500mJ(532nm)
Repeat frequency 1~10Hz/1Hz step
Cooling systemclosed inside circulation water and constant temperature condition system
Dimension 500 900 910 mm3
Weight 85Kg
Power supply AC220/110V 10%,50/60Hz.
Specifications
A8 super pulse 30W CO2 laser treatment apparatus is called "photon scalpel of cosmetology" The unit has the finer and the shar
The Ultra pulse Fractional Laser System
The A8Generation-2 Ultra Pulse Co2 Fractional Laser System, with 4 working modes as pulse, Scanning, Ultra Pulse and Continuous, could do various of high-demanded laser treatment safely and effectively, specially for aesthetic surgery and dermatology.
It virtues for its 4 advantages, that is, high precision operation ,tiny thermal injury , short treatment time, quicker recovery time. With highest-integrated and ultra-high-speed Graphics Scanner, the machine could scan various of non-linear fashion with different size and shape. The scanning shape could be specially designed for customer¡¯s different needs, either 2 modes could be chosen in the 11 scanning modes.
It also virtues as its Dynamic Balance and Compensation Install for Remedying Energy Attenuation.
The machine could automatically compensate more energy when the energy of the laser tube reduces, without needing operators reset the treatment parameters according their own experiences.
System Feature
¡¤Green guiding light make operation vision clearer¡¤For skin resurfacing and for dermatology cut/surgery.¡¤Various power supply for European, American and area needs.¡¤Smaller and lighter scanner(volume:7x4x11cm, weight:240g) for more convenient operation.¡¤With background set for operation time and machine use time.¡¤With time-accumulater for showing total operation time and machine use time.¡¤Friendly designed in modular for easy maintenance, with red and green light to guide it.¡¤Friendly designed for high safety, with warning-alarm-set. Clearly showed on the display screen.¡¤With energy self-replenishment system, improving the electric flue automatically to ensure real screen.¡¤With high cost-effective, great quality, best accessories, made by most skilled workers and engineers.¡¤With cooperation beauty hospital ,each machine should be first perfected in hospital, then customers.¡¤Committee of China Laser Standard Association, Executive of Laser Branch of china Optical Society.
Application:
It is applied in stripping ,cutting and vaporization. Specially, for skin rejuvenation, improvement of pachylosis, large pores, complexion unbalanced and so on. It has notable effect of removal scars, winkles, pigmentation, stain, acne, moles, nevus, hemangioma, skin tag and so on.
Acne scars,Surgical scars,Traumatic scars,Actinic scarsMelasma (mask of pregnancy)Skin resurfacing (to improve texture)Wrinkles around the eyes and mouthPigmented lesions : age spots/brown spots/sun spots/Red vascular removal
Fractional laser working principle
With fractional CO2 laser resurfacing , the laser beam is broken up pr fractionated into many small micro beams which are separated ,so that when they strike the skin surface small areas of the skin between the beams, the skin would not be hit by the laser and left intact.
These small areas of untreated skin promote a much more rapid recovery and healing time, with less risk of complications. While the small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant in facial skin rejuvenation.
As these treated areas are much smaller than the surrounding healthy tissue, the healing time is significantly shortened. Most fractional CO2laser patients heal in less than one week for facial treatment. It provides results almost as good as traditional full-surface CO2laser, but with far less risk, downtime, infection and complication.
Nicely, it can also safely treat other areas besides face, producing excellent results in treating neck, hands and back, such as skin laxity, acne scars and wrinkles. But only one to two treatment are needed for up to an 85% improvement.
Traditional full-surface CO2laser treatments are performed by using a beam of intense laser energy, which is passed over the skin surface to vaporize the entire top layer of skin. The damage to the tissue is extensive, it takes at least tow weeks to heal and regrow a new top layer of skin(i.e., re-epithelialize the entire top layer of skin).
Technical Specification
Wave Length: 10.6umOutput Power: 1-30W adjustableMicro Pulse Energy: 5mj-100mj,16 steps adjustableEstimated Power: 125mj-1kjScanner Focus: 50mm (FFLS) or f=100mm (HFLS)Focus Spot Diameter: 0.1mm (FFLS) , 0.2mm(HFLS)Treatment Depth: 2000um (FFLS),600um(HFLS)Conducting Beam: Green Semi-conductor laser (532nm,=mW)Control System: microcomputer controlSmoke Emission System : Built-in air blowCooling System: Water coolingDisplay Screen: color LCD (8 inch touch screen)Light Delivery System:7 Joint articulated armWorking Mode: with scanner (galvanometer scanning)FFLS scanning area: max 15x15mmHFLS scanning area: max 15x15mmScanning mode: Ellipse, Rectangular (standard)Scanning velocity: 10m/sCW: output power,1-30w, 1W adjustableUltra: Frequency, 1000HZ, 1HZ adjustableTreatment control: footswitchEnvironmental Temperature: 5-40CRelative Humidity:80%Machine Weight: 40kgMachine Dimension: 450mm x 550mm x 1400mmPower Supply: AC 220/110V;50/60HZ.
Treatment theory hair removal
E-light beauty machine= ipl + bipolar radio frequency + intelligent cooling system, when use together, you will see the amazing treatment result.
Feature hair removal
1. Remove completely many kinds of spots, for example, freckle, chloasma, butterfly rash sunbum, age pigment, coffee speckle, cosmetic.
2. It is a effective hair removal tool, and it can clear away body & facial hair, clypeal hair, armpit hair, bikini hair, leg hair, arm hair and others body hair.
3 .It could dispel angiotelectasia, acne, scra of acne and erythema.
4. It could enhance breast, make women breast much more attractive.
5. It can remove wrinkle from our skin and meet much more glossy/soft , our skin hardly wrinkled.
Applications hair removal
1. Hair removal: e-light will destroy the hair-follicle, and then achieve permanent hair removal effect. Whether black or golden hair and light-colored hair can be removed.2. Spot removal: e-light can reach the epidermis and dermis, borken down abnormal pigment cells. So that they will slowly eliminated from the body. 3. Red capillary and acne: e-light will closed abnormal blood vessels, clean the skin , kills the acne bacillus, make the skin more glossy, white.4. Skin rejuvenation: e-light stimulate collagen proliferation, make skin tighting and lifting, remove wrinkle and more white.5. Breast lifting: e-light wavelength can promote the breast regeneration. Make breast biger and biger.
Wavelengh430/480/530/560/590/640/690/750nm
Energy density0-50 j/cm2
Rf frequency0.1-10 mhz
Rf power0-50w
Light spot area10×20mm², 10×40mm².13×30mm², 15×35mm²
Total enery supply1200w
Cooling systemSemiconductor+ air-cooled + colse water circulation
Operative screenTouch color lcd screen,
Probe tempreture-4°c-0°c
Dimension42*38*103cm
Weight50kg
Voltage220v110v/15a 50hz(60hz).
Technical parameters
(the working area and laser power can be customized according to requirement)
Model of machine CX-CO2-30/60/80/100(optional)
Laser tube Co2 laser tube
Cutting area110mm 110mm /300mm 300mm(optional)
Laser power 30w/60w/80w /100w(optional)
Marking speed0-7000mm/s
Operating voltage Ac220v 10%, 50hz
Location precision 0.01mm
Working environmentTemperature humidity 0-95%
Min. Line width0.015mm
Min. Character0.3mm
Graphic format supportedBmp, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, COMPATIBLE HPG ORDER, SUPPORT DXF, PLT, BMP and dxt(tiandao embroider software), etc.
Marking depth 0.01-0.2mm
Working tableLift platform up to 1, 000mm from the bottom to the top
Auxiliary devic eExhaust fan and cooling system
Laser wavelength1064nm.
Characteristic of machine:
1. Quality accredited by CE, ISO9001
2. Double laser heads, cut bidirectionally from top and bottom at the same time, with high cutting efficiency, also assure the cutting seam to be straight
3. Automatic tracing system for focus point, overcomes the barrier of surface uneven
4. Powerful software, like autocad, coreldraw, and adobe photoshop for unique designing.
5. Adopting imported guide rails, ballscrew transmission system, servo motor and our special designed software, insure steady performance
6. Cnc operation, with high cutting speed and accuracy
7. Exhaust system to keep the working condition free of smoke pollution
8. Can cut max. 25mm thickness plywood
9. With our multi-function bending machine, can realize the full automatic process of template making.
Technical parameters:
Model of machine Hld1208 Hld 1210 Hld 1212 Hld 1215 Hld 1218 Hld 1220
Valid size (mm) 1200*8001200*10001200*12001200*15001200*18001200*2000
Laser tube type Co2 sealed laser tube
Laser power 300w (work bidirectionally with two laser heads)
Cutting speed 0-200mm/s
Power supply 220v 10a
Cutting width0.3-3mm(optional)
Max. Thickness25mm
Color separationYes
Cutting precision 0.02mm
Image form PLT, EPS, BMP, DXF
Control system:Movement control board/CNC
Transmission Ballscrew
Driving systemServo motor
Air feed meansAir.
Technical parameters
(the working area and laser power can be customized according to requirement)
Model of machine HLM-SD-50
Laser tubeSemi-conductor mould
Cutting area110mm 110mm /300mm 300mm(optional)
Laser power 50w
Marking speed0-7000mm/s
Operating voltage Ac220 10%, 50hz
Location precision 0.003mm
Working environmentTemperature: 0-40 centidegree, humidity: 45%-85%
Marking depth 0-0.3mm
Min. Line width 0.02mm
Min. Character 0.2mm
Graphic format supported BMP, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, compatible hpg order, support DXF, PLT, BMP and dxt(tiandao embroider software), etc.
Working tableLift platform up to 1, 000mm from the bottom to the top
Auxiliary deviceExhaust fan and cooling system
Laser wavelength1064nm.
Technical parameters
Model HL-W-200
Working table dimension200mm x 100mm(customized)
Welding depth0. 1-2mm
Max output power 200w
Laser wavelength 1064nm
Pulse width 0.3-20ms
Welding frequency 1-100hz
Pump sourceXenon lamp
Single pulse engrgy 105j
Consumed power 18kw
Electrical source 220v 10%/50hz/40a
Adjustable facula size0.2-2mm
Waveform number 16
Power consumed 6kw
Cooling mode Water-cooling
Control of worktable Manual+CNC programming (optional)
Consumable material Krypton lamp / filter / water / electricity
Optional accessories Anti-laser glasses
Usage environmentClean, no shaking, temperature 13 humidity 5% -75%.
High efficiency,save energy ,protected environment
• High stability and low ripple, increase light efficiency and decrease light attention
• Meet to safety standard and EMC
• Assure LED stability long lift and light efficiency by constant current
• Passed high ,low temperature and waterproof testing.
• Integrity protection,over loading, over voltage ,over current
• 8Hrs and 100% full load burn-in test.
We develop, manufacture and supply high quality, high performance and competitive price of 3-phase ac servo drive (50w-5.5kw) and ac permanent magnet servo motor (0.6N.M-35N.M, 50W-5.5KW).
Servo drive: EP100/EP1/EP2/EP3.
The configuration:
50w, 70w Diode pumped, Rotating device
Performance characteristics:
1. Rotating device formulate
2. Rotating device is suitable for any type of Laser Marking Machine and cylindrical, conical work piece to mark in circumference direction 360-degree.
3. The marking speed and rotational speed is consistent .Rotating and marking synchronously.
4. Marking head light base can fluctuate lift and the distance for 250mm.
Application scope:
Applied to any metal (including rare metal) íóalloy and oxidesíóepoxy resin íóink and so on. Widely used in electroníóglassesíóautoíócommunications productsíóelectronic componentsíóplastic buttonsíóhardware productsíótools accessoriesíóprecision machineryíóSanitary wareíójewelryíóescutcheoníóauto partsíóelectrical appliancesíóbags decorative claspíóKnives, lock, the cooking utensils, integrated circuit IC, medical equipment, etc.
Technical parameters:
Marking scale Marking speed Marking depth Maximum output power Laser wavelength Cooling way The machine power Marking precision
100*110mm <7000mm/s 0.02mm 50w/75w 1064nm Intelligent water-cooling 2kw 0.02mm
Machine characteristics:
Adopt the newest Carbon dioxide laser device , Laser tube life more than 2 million hours ,apply to laser beam cuttingú¼engraving ,making. All parts focus on a cabinet, which operate easily .
Application field:Engraving non-metal materials.
Apply to garment accessories, package , architectural pottery, beverage packing, rubber product, electronic components and so on .
Technical parameters:
Marking scale Marking speed Marking precision Marking depth Maximum output power Laser wavelength Cooling way The machine power
70*70mm <7000mm/s 0.02mm <0.2mm 10w 10.6UM Intelligent aircooled 1kw
Samples
Mechanical characteristics :
Applied the krypton lamp to the laser source, adopt imported with original packaging key accessories such as ceramic cavity(English), Q-switch (English),Laser source, laser power (Singapore) and so on ,which ensure the high marking precision and speed. Having stable and the long-term work performance that belongs to the general model.
Applicable materials and field:
1. Can be carved on the metal and many kinds of nonmetal materials.
2. Widely applied in electronic components, integrated circuit, electrical appliances, mobile communications, hardware products, tools accessories, precision instruments, glasses watches, jewelry ornaments, auto parts, plastic buttons, building materials, PVC pipes medical devices, etc.
In order to supply automobile, machinery, electronics, metallurgy, petroleum chemical industry urgently needed in the depth of the laser marking and sculpture technology and system research and development, to provide enterprises meet the needs of the market and industrialization of laser products and technology. Recently, the successful development of the new generation laser engraving equipment - lamp pumped solid laser depth marking engraving system. This technology overcome traditional laser marking machine carving depth dive, carving slow faults, can achieve very beautiful deep engraving.
This system incorporates laser marking and sculpture at an organic whole, is both a high-speed laser marking machine, is also a depth laser engraver machines multi-usage, simple operation, convenient and flexible.
A, Technical features
1, the key parts is superior device such as a sound-light switch, pump lamp, etc, to ensure the high quality of laser system.
2, can use already long pulse width, high-energy laser engraver, and use short pulse width, peak value power laser to sculpture.
3, adopt special measures, under the same power consumption circumstances, peak power than ordinary lamp pumped solid state lasers to high, up to 10 times more likely to 300kW.
4, beam quality good, energy conversion, high efficiency.
5, the world's deepest power-forward, the fastest marking carving machines, one of engraving of high precision, good effect, the biggest engraving depth could exceed 5mm.
6, carving mode: can undertake 3 dimension two-dimensional or three-dimensional sculpture (namely sculptured figures and planar surface with fixed depth or different depth).
B.Areas of application
Can be used in automobile, motorcycle parts, hardware tools, stainless steel wares, medical apparatus and instruments, clocks jewelry, industrial bearings, mould etc many need deep engraving industry, may to the copper, aluminum, zinc , stainless steel etc in-depth engraving.
C.Technique parameters
Maximum laser average power 100W
Maximum laser peak power 300KW
Laser wavelength 1064nm
Engraving range <110x110mm
maximum engraving depth ¦5mm(as different material)
Maximum linear scanning speed maximum7000mm/s
Minimum line width 0.05mm
Minimum characters 0.3mm
Repeat precision ¦0.005mm
Power input 380V/50Hz 4.5KW
Features of the machine:
The company in many years development based on the experience of using new ideas created the novel style and superior performance of Semiconductor Laser marking machine. This machine that the lightning high conversion efficiency, output beam quality good, long life, and various performance indexes have reached the international advanced level. Its core components: diode pumped module, servo scanning galvanometer, sound-light Q switch, Q drives, laser power all has the profession leading level of the world.
Applicable materials and field:
Can be carved on the metal and many kinds of nonmetal materials, it is especially suitable for some require careful, high precision of the occasion such as electronic components, integrated circuit, electrical appliances, mobile communications, hardware products, tools accessories, precision instruments, glasses watches, jewelry ornaments, auto parts, plastic buttonsíóbuilding materials, PVC pipes medical devices, etc.
1. Battery charger
1. Professional mount: according to anton/bauer product, install with gold mount("a" type mount), and the link is safe and reliable.
2. Fast charge system: many batteries can be charged simultaneously, double, voltage 16.8v, current is 2 a; 4 batteries, voltage 16.8v, current is 1.5a
3. Input voltage: ac100~240v
4. Adapter output: 12v 50w
5. Dc power function: as an adapter. Can offer dc 12v power supply for camera.
6. Lcd display function: charge voltage, battery capacity, current, cycle times, model, manufacture date, temperature etc.
7. Perfect protection function: according to the characters of the battery, the charge system provides suitable charging process for the battery.
8. Light design is easy to carry
9. Comhensive use for camera
10. High quality, competitive price
1. Battery charger
1. Professional mount: according to anton/bauer product, install with gold mount("a" type mount), and the link is safe and reliable.
2. Fast charge system: many batteries can be charged simultaneously, double, voltage 16.8v, current is 2 a; 4 batteries, voltage 16.8v, current is 1.5a
3. Input voltage: ac100~240v
4. Adapter output: 12v 50w
5. Dc power function: as an adapter. Can offer dc 12v power supply for camera.
6. Lcd display function: charge voltage, battery capacity, current, cycle times, model, manufacture date, temperature etc.
7. Perfect protection function: according to the characters of the battery, the charge system provides suitable charging process for the battery.
8. Light design is easy to carry
9. Comhensive use for camera
10. High quality, competitive price
