The ems39 is an integrated genset controller which incorporates full engine protection, lcd display of engine temperature, oil pressure, battery volts, speed and genset hours, provides manual start and stop buttons, autostart, and controls excitation of the battery charging alternator.
Low cost
Fully sequenced starting and stopping with retries
Lcd display of starting and running sequence icon alerts against low oil pressure, high engine temperature, low battery volts, excitation failure, high/low engine speed preheat output (if any) starts the engine easily under cold environment
Run output (if any) activates on successful engine start and controls load
Alarm output (if any) in the event of abnormal operation
Autostart imput allows remote control start
Speed detection directly from generator, mpu or alternator output
Nput can be external shutdown for emgency stop
Unit type:piece package weight:0.102kg (0.22lb.) package size:20cm x 20cm x 5cm (7.87in x 7.87in x 1.97in)
Dse5510 is an automatic engine control module, is designed to provide advanced load distribution function, used for diesel and gas turbine, including electronic and non electronic engine. The module also provides engine monitoring and protection function well.
Synchronization function of these modules including, with built-in synchronizer for automatic synchronization, and switching to non electric pump. Provide from direct and flexible output module, to allow the connection to the governor on the most commonly used and the automatic voltage regulator (avr). This module is designed to combine up to 16 generators, and 16 and up to the power of 20, in one system, for example: 16 generators and 4 electric (dse5560 must be synchronized with the power)
Unit type:piece package weight:2.000kg (4.41lb.) package size:18cm x 18cm x 18cm (7.09in x 7.09in x 7.09in)
3 analog input, can be used for pressure, temperature and oil level measurement, and built a variety of sensor selection, can be custom parameters.
More can define auxiliary control relay output.
More can be defined isolation switch input.
The controller panel button is used to select the control mode, start and stop running the program, data display and running protection parameter modification, led indicator for running state indicating the mode of the controller and the generator, lcd display of the measurement parameters and state.
Flexible adaptation of rs485, rs232 or usb communication interface, remote monitoring, through communication with the pc, fully realize the remote communication, telemetry, remote control function, operation parameters and can be read out and set the controller.
Unit type:piece package weight:1.500kg (3.31lb.) package size:20cm x 18cm x 17cm (7.87in x 7.09in x 6.69in)
E the internal temperature effectively.
4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable.
5.French tecumseh is used as compressor, with environment friendly refrigeration r232 or r404a
6. Lcd display screen, capable of displaying the measured value as well as the set value and time.
7. The control unit has the functions of multiples segment program editing, with quick or ramp rates control of temperature and humidity.
8. casters are provided for ease of mobility, with strong positioning screws.
Vices: fuse free switch, overloading protection switch for compressor, high and
Wooden case
959 Temperature Controllers Indicators Suppliers
Short on time? Let Temperature Controllers Indicators sellers contact you.
Per set includes a electric box, a heater and a control panel
1) plug-and-play mode is to get the easy operation and easy installation.
2) three working modes: normal mode, economic mode and filter mode.
3) 24 hours clock display and setup of circulation-cleaning.
4) synchronous changing color with multiple lights and fixed color light and ozone antivirus system.
13) compatible with heat pump
14) error code hinting
The temperature range of chilled fluid is from 5
It is better to use the chiller while the ambient temperature at or belo
We reserve the right to modify the above dimensions or parameters without further notice.
We manufacture a stock range of probes to suit the hand hold thermometers and will manufacture custom assemblies to suit your applications for food, liquid, surface, air, compost and immersion temperature measurement.
Specifications:
Wide operating temperature range: -20 to 125 degree celsius
Dielectric strength: 1, 500v ac for one second
Short thermal response time in water, high stability in moisture
Suitable for use in high-temperature and moisture environments
High accuracy, different tolerance available, cost-effective
Customized specifications are welcome
Characters:
Radio frequency:433mhz
Max controlling distances:≥30m
Ultra-high sensitive color wheel
9 programmed dynamic modes
8-step speed/brightness control
'memory' function
'auto-off' function
Independent zone on/off
Independent warm white, day white, cold white color
Rgb/rgbw output selectable via reposition jumper
Radio frequency:433mhz
Controlling distances:≥30m
Programmable(diy dynamic mode)
6 diy dynamic modes
8-step speed/brightness
'memory' function
'auto-off' function
Independent zone on/off
Independent warm white, day white,
Cold white color
Characters:
Radio frequency:433mhz
Max controlling distances:>30m
Ultra-high touch sensitive color wheel
2 audio modes
'spectrum' function
6 programmed dynamic modes
6 fixed acoustic sensitivites
Acoustic sensitivity setting on the remote control
Adjustable to any acoustic sensitivity(1-100%)
8-step speed/brightness control
'memory' function
Independent warm white, day white, cold white color
Feature:
1.Use for controlling the valves of hot runner according to different sequence, supporting the use of two colors or three colors injecting molding machine
2.Control 1~30 channels solenoid valves
3.Adopt 7 inches touch screen, display the working condition on the work screen and set the parameter on the set screen.
4.Separately set the multigroup interval and working time of every channel
5.With the manul test function, separately open or close to test every channel
6.External 1/2 24v signal to trigger start
7.Trouble signal output, input and other signals are selectable
1.Temperature controller adopts Japans and Italian (P.I.D) programmed sensor
internal storage, which calculates automatically.
Its precision is controlled within +1¡æ and it can save above 35% power.
2. Two sets of tubular electric heating element can use one or both.
3. Short heating of cooling time and stable temperature.
4. Electric heating can is made of stainless steel.
5. Perfect security protection and fault indication system
6.Use the advanced unit from foreign countries with long life.
7. CAD system design that is easier to handle and maintain.
LONG;1100
WIDE;600
HIGH;600
WEIGHT;110KG
PACKING; STANDARD WOODEN CASE
1.Temperature controller adopts japans and italian (p.I.D) programmed sensor
Internal storage, which calculates automatically.
Its precision is controlled within +1¡æ and it can save above 35% power.
2. Two sets of tubular electric heating element can use one or both.
3. Short heating of cooling time and stable temperature.
4. Electric heating can is made of stainless steel.
5. Perfect security protection and fault indication system
6.Use the advanced unit from foreign countries with long life.
7. Cad system design that is easier to handle and maintain.
Long;1100
Wide;600
High;600
Weight;110kg
Packing; standard wooden case
Display type: mono stn lcd
Display color:16 shades of blue
Display size: 5.7¡± (diagonal); display area is 117.2 x 88.4mm
Number of pixels :320x240; number of 8x8 characters displayable is 40x30.
Input power: 24vdc15% ; less than 20w
Ram :512 k bytes
Cpu :32 bits risc
Battery backed memory:512 k bytes
Com1 9-pin female connector: rs232/rs485
Com2 25-pin female connector: rs232/rs422/rs485
Multi-functional port 26-pin connector to: printer or 64 external keys
Ethernet:yes
External dimensions (mm) 195(w) x 145(h) x 59.1(d)
Cut-out dimensions (mm) 185.8 x 135.8
Weight 0.81 kg
PTC thermistors current protector, also called PTC thermistor resettable fuses, protect load against over-current, overload, short circuit. No need for replacement, resume protective function after a short cooling-down time.
Ceramic PTC (positive temperature coefficient) thermistors are used instead of conventional fuses to protect load, such as motors, transformers, or electronic circuit, against overcurrent for circuit protection. PTC thermistor protector not only respond to inadmissibly high currents but also if a preset temperature limit is exceeded. PTC thermistor over-current protector limits the power dissipation of the whole circuit by increasing their resistance and thus reducing the current to a harmless residual value. In contrast to conventional fuses, PTC thermistor resettable fuses do not have to be replaced after elimination of the fault but resume their protective function immediately after a short cooling-down time.
PTC Thermistor Over-current Protector Application
It applies in the over-current overload and short circuit protection of transformers, battery charger, switches, switch power supply, adaptor, meter, instrumentation, apparatus, electronic coils, control panels, air conditioner, automotive electron, etc.
Operating Principle of PTC Thermistor for Overload Over-current Protection
The operating principle is as indicated in the following. When a circuit is in the normal status, the current through PTC is lower than the rated current and PTC thermistor protector is in the normal state with small resistance value, which will not affect the normal operation of the protected circuit. In case of some fault in the circuit and the current is greater than the rated current, the PTC thermistor protector will become hot quickly and present a high resistance state, which sets the circuit relatively "off" to protect the circuit from damage. After the fault is removed, PTC thermistor protector will automatically restore its low resistance state and the circuit will resume normal operation.
Normally, when PTC thermistor is used as an overcurrent protection component, it is preferred to select maximum operating current, maximum operating voltage and proper specifications. Furthermore such factors should be taken into consideration as the dimensions of the components, rated zero-power resistance, operating temperature range, etc.
959 Temperature Controllers Indicators Suppliers
Short on time? Let Temperature Controllers Indicators sellers contact you.
