Product Description
ACR Straight Tube is mainly used for Air Conditioning and Refrigeration. We can produce the ACR Straight Tube according to ASTM B280, JIS H3300, AS/NZS 1571 standards.
The ACR straight tube is also with R410 A rated quality. Generally supplied with lengths of 19ft, 20ft and 6 meters, 5.8 meters, Shorter lengths are available to suit special requirements.
Outside Diameter: From 3/8 inch to 4-1/8 inch (British system)
Wall Thickness: From 0.030 inch to 0.110 inch (British system)
The same outside diameter with different wall thickness also available.
ACR Straight Tube is usually supplied in the hard and half hard temper, annealed temper is also available if requested.
Features: small volume and convenient installation, probe fault indicator, 220v power supply.
Power consumption: less than 3w
Measurement range:-30~+110¡ã c
Accuracy: 1%
Display eee ntc sensor failure (short circuit or open circuit)
Power supply: 220v
Dimension: 64(l) x31(w)
Mounting hole dimension: 58.4(l) x 25.7(w) mm
Display eee ntc sensor failure (short circuit or open circuit)
Power supply: 220v
Dimension: 64(l) x31(w)
Mounting hole dimension: 58.4(l) x 25.7(w) mm
Mfld electromagnetic flowmeter is operating based on principle of the electromagnetic induction law of faraday, and the sensor consists of measuring tube, electrode, induction winding, iron core and yoke. It is mainly used to measure the volume flow of the conductive liquid and slurry in a close tube, such as the acid, alkali, salt and other fluid which is easurement will not be affected by the density, viscosity, temperature, pressure and conductivity of the liquid. The lining and electrode materials are manufactured with good corrosion resistance and abrasion resistance. Adopt a novel way e and conductivity of the liquid.
E program is reliable;
7. The measuring system is bidirectional and three integrators inside: positive total, reverse total and difference value total. The positive total and reverse total are both displayable. It also has multiple ways of output: electric current, pulse; digital communication, hart.
8. The mounting technology of converter is surface mount technology (smt) which possesses self-check and self-diagnose functions.
Export standard packing according to buyer's requirements
Mfld electromagnetic flowmeter operates based on the principle of electromagnetic induction law of faraday. Sensor consists of measuring tube, electrode, induction winding, iron core and yoke. It is mainly used to measure the volume flow of the conductive fluid and slurry in a close tube, such as the acid, alkali, salt and other fuild which is high le for the sity, viscosity, temperature, pressure and conductivity of the fluid.
2. There is no obstacle or loss of pressure in the measuring tube. Low requirements for straight tube.
3. The range of caliber is dn15~dn3000, multiple choices are available for the lining of converter and the material of electrode.
4. Adopt a novel way of excitation. Low power consumption, stable zero point and high accuracy. The volume flow range could be up to 1500:1
5. Sensor and transmitter can be made up into two forms: compact-type and remote-type;
Export standard packing according to buyer's requirements
956 Temperature Controllers Indicators Suppliers
Short on time? Let Temperature Controllers Indicators sellers contact you.
Lugb vortex flowmeter is a internationally advanced new type of flowmeter, which is developed based on karman vortex street theory. It is applicable to the measurement of superheated steam, saturated steam, general gas and fluid. Advantages: low pressure loss, wide measurement ratio and high accuracy, simple structure, no moving parts, high reliability . The measurement will not be affected by the density, viscosity, temperature and pressure of the fluid. This item could work smoothly under the temperature of -20¡æ~+250¡æ. Pulse and analog signal can be choose, which could well operate with the computer system.
Medium: gas, liquid and steam.
¡«90% rh50¡æ
Material : stainless steel, aluminum alloy.
Energy supply: dc 24v, li 3.6v
Explosion-proof grade: iaiibt3-t6 (intrinsically safe explosion-proof)
Export standard packing according to buyer's requirements
Lugb vortex flowmeter is an internationally advanced new type of flowmeter, which is developed based on karman vortex street theory. It is applicable to the measurement of superheated steam, saturated steam, general gas and fluid. Advantages: low pressure loss, wide measurement ratio and high accuracy, simple structure, no moving parts, high reliability. The measurement will not be affected by the density, viscosity, temperature and pressure of the fluid. This item could work smoothly under the temperature of -20¡æ~+250¡æ. Pulse and analog signal can be choose, which could well operate with the computer system.
Medium: gas, liquid and steam.
Duty cycle: 50%, transmission distance: 1000m
Ambient temperature: -25¡æ¡«+55¡æ; ambient humidity: 5¡«90% rh50¡æ
Material: stainless steel, aluminum alloy.
Energy supply: dc 24v, li 3.6v
Explosion-proof grade: iaiibt3-t6 (intrinsically safe explosion-proof)
Export standard packing according to buyer's requirements
Material hopper separates with main controller.Safer and more convenient
With isolated filter, it is easy to clean
It is equipped with the special device to reduce the working noise
Material hopper is made of stainless steel, light and durable
Separately-designed controll chest is operated by micro computer
It is equipped with motor auto protection device
Warning device works automatically when lacking material
Motor can rotate anti-closewise to get rid of dust
Features£º
Oil type thermal controller of zhenfei series standard style and high temperature style mould and keep temperature can be used heating mould and keep temperature
The temperature can be controlled +-3¡æ error
Adopt high efficiency pump good pressure and steady
It can find out the problem automatcally and showed by alarm when there is breakdown
It is convenient to be repaired and dismantled
The heating pipe is made of stainless steel
The temperature of standard style can reach 200¡æ, and 300¡æ for high temperature style
uter through the computer operation furnace free software more information see: computer control system.
Heating faster (heating rate 1 ¡æ / h to 40 ¡æ / min adjustable).
Energy saving (furnace imported fiber production and become, high temperature resistant, resistant to sudden heat quench)
Furnace body the delicate coating corrosion resistance to acid and alkali,
Furnace and furnace isolation adopt the cold furnace wall temperature close to room temperature.
Double circuit protection (over-temperature, over-pressure, super flow, section i, cut power, etc.)
Imported refractory materials, excellent heat preservation performance, high temperature resistant.
Temperature category: 1200 ¡æ 1400 ¡æ 1600 ¡æ 1700 ¡æ 1800 ¡æ
Pvc applicator and strain relief makes insertion easy while protecting the lead wire from kinks and thinner lead wire is more pliable and provides greater accuracy.
Description
The esophageal/rectal probes provide for accurate measurement of body temperature. The probe can be placed in the esophagus, rectum, nasopharynx, or axilla. The probes are available in both 9fr and 12fr meeting the needs of adult and pediatric patients. Our probes are compatible with all series ysi400 patients monitoring equipment.
In addition, our esophageal/real probes can be customized being. A tip-to-end pvc sleeve protects the lead wire from strain, breaks, kinks, and interference from ambient air, enhancing product quality and temperature accuracy.
mia equipment providing an accurate, low cost alternative.
mps and other lighting, improving sensor accuracy.
Thinner lead wire is less stiff and more pliable for application on the skin and reduces the interference of ambient air on the temperature reading (the stem effect).
The sensor is embedded in the centre of the foam disk to reduce the likelihood of sensor separation from the foam. This feature also decreases the risk of irritation in patients with, sensitive skin.
The ems39 is an integrated genset controller which incorporates full engine protection, lcd display of engine temperature, oil pressure, battery volts, speed and genset hours, provides manual start and stop buttons, autostart, and controls excitation of the battery charging alternator.
Low cost
Fully sequenced starting and stopping with retries
Lcd display of starting and running sequence icon alerts against low oil pressure, high engine temperature, low battery volts, excitation failure, high/low engine speed preheat output (if any) starts the engine easily under cold environment
Run output (if any) activates on successful engine start and controls load
Alarm output (if any) in the event of abnormal operation
Autostart imput allows remote control start
Speed detection directly from generator, mpu or alternator output
Nput can be external shutdown for emgency stop
Unit type:piece package weight:0.102kg (0.22lb.) package size:20cm x 20cm x 5cm (7.87in x 7.87in x 1.97in)
Dse5510 is an automatic engine control module, is designed to provide advanced load distribution function, used for diesel and gas turbine, including electronic and non electronic engine. The module also provides engine monitoring and protection function well.
Synchronization function of these modules including, with built-in synchronizer for automatic synchronization, and switching to non electric pump. Provide from direct and flexible output module, to allow the connection to the governor on the most commonly used and the automatic voltage regulator (avr). This module is designed to combine up to 16 generators, and 16 and up to the power of 20, in one system, for example: 16 generators and 4 electric (dse5560 must be synchronized with the power)
Unit type:piece package weight:2.000kg (4.41lb.) package size:18cm x 18cm x 18cm (7.09in x 7.09in x 7.09in)
3 analog input, can be used for pressure, temperature and oil level measurement, and built a variety of sensor selection, can be custom parameters.
More can define auxiliary control relay output.
More can be defined isolation switch input.
The controller panel button is used to select the control mode, start and stop running the program, data display and running protection parameter modification, led indicator for running state indicating the mode of the controller and the generator, lcd display of the measurement parameters and state.
Flexible adaptation of rs485, rs232 or usb communication interface, remote monitoring, through communication with the pc, fully realize the remote communication, telemetry, remote control function, operation parameters and can be read out and set the controller.
Unit type:piece package weight:1.500kg (3.31lb.) package size:20cm x 18cm x 17cm (7.87in x 7.09in x 6.69in)
E the internal temperature effectively.
4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable.
5.French tecumseh is used as compressor, with environment friendly refrigeration r232 or r404a
6. Lcd display screen, capable of displaying the measured value as well as the set value and time.
7. The control unit has the functions of multiples segment program editing, with quick or ramp rates control of temperature and humidity.
8. casters are provided for ease of mobility, with strong positioning screws.
Vices: fuse free switch, overloading protection switch for compressor, high and
Wooden case
956 Temperature Controllers Indicators Suppliers
Short on time? Let Temperature Controllers Indicators sellers contact you.
