Advantages:
*High performance stainless steel mixer with very good over run.
*Refrigerate quickly and achieve denmanded low temperature with powerful evaporator.
*Intelligent computer control , digital display, regulate the hardness at any time
*Our ice cream freezer has Humanization design, full automatic cleaning function
*Toothed pulley and synchronous belt
*Pre-cooling system could keep the mix fresh for long time
*New designed plastic air pump could make the ice cream reach to high overrun.
*Accessories of our machine
Compressor:
Aspera from Italy
Danfoss,from Denmark
Tecumseh,from France
Frozen expansion valve:Danfoss,from Denmark
Solenoid valve:Saginomiy,from Japan.
Cylinder:Two,1.9QT(1.8L)
Mix Hopper:Two,6.3QT(6L)
Capacity:30-35L/H
Power type: 220CV/50HZ,220V/60HZ
Beater motor: One,1.1KW
Refrigerant type : R404A,R134A
Installed power : 2.2KW
N.W:134KG
G.W.:159KG
Packing: wooden case
Product Size:730*547*1420mm
Carton Size: 850*670*1500mm
Advantage of our icecream machines:
High performance stainless steel mixer
Unique freezing cylinder optimizes refrigerant efficiency
Intelligent computer control, digital display, regulate the hardness at any time
Full automatic working, standby time for 3-9 minutes.
Our ice cream machine has humanization design, full automatic cleaning function timing mode , low noise.
Compressors:Aspera from Italy
Accessories of our icecream machines:
Frezon expansion valve is made in Denmark
Solenoid valve is made in Japan
Pre-colling system could keep the mixture fresh for long time.
Apply scope
(they are the same with household drinking water, miniature farming navigation for low water levels suburb or rural areas, high buildings and factroies, mines, enterprises, high reach water and long distance water.
Introduction of framework
(screw pumps are made up of machinery sealed parts with two ends of screw rubber stators, dry or horrent oil submersible electric engines, both electric engines and pumps adopt rubber or universal machinery linkers, no slot outside.
Pumps installation and applications
(qj submersible well motor pump is a complate set of equipment to puming water from deep-well.It is widely used for farm irrigation, water supply and drainage in factories and mines proving human being and animals with drinking water in plateau or mountain areas.
1).Material: brass cw614n, cuzn39pb3, cw617n, cuzn40pb2, dzr
2).Technology: forging, plating, polishing
3).Connection: male and female, coupling, union
4).Size: 12*16, 16*20, 20*25, 26*32, ......, 51*63.
5).Used for gas, water supply systems, drinking water..
2, advantage:
1) fast material supply. Have own copper bar factory of group.
2) every valve put through a six-step qc process before delivery.
Material control, machining quality control, in-coming material inspection, assembly line quality control, leakage testing, final inspection before delivery.
3) 100% leakage test.
4) strictly and perfect management in production.
5) guaranteed quality in competitive price.
6) on-time delivery.
7) complete r&d facilities and excellent team.
8) annual r&d projects reach the number of 100.
Have rich experience and strong ability to develop new products.
1)the package standard:standart export carton, box.
2)if customer has special requirement.It is available to provide the colorful package against the design of customer.
CM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Its maximize product capacity can reach 1600pcs/h.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000mL
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output 1,200 to 1,600
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5 to 38mm
* Molding:
o Max mold plate dimension (L x W): 350 x 380mm
o Max mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
* Power 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
Cm-8y semiautomatic bottle blow molding machine is suitable for producing pet plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle , mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
Adopting double crank to adjust mould , heavy locking mould, stable and fast , adopt infrared oven to heat the perform , the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate .
Main parameterú¦
Type item unit parameter
Container product material / pet pp pe
Volume l 0.1-2
Theoretical output pcs/h 1200-1600
Preform length mm 15-350
Preform inner diameter mm ª)5-38
Moulding max.Mould plate dimenstion(l x w) mm 350x380
Max.Mould thickness mm 180
Clamping force kn 45
Mould opening stroke mm 16
Machine size and weight main machine (l x w x h) cm 160x60x161
Main machine weight kg 500
Heater (l x w x h) cm 187x63x145
Heater weight kg 250
Power kw 17.5
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000ml
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output: 600 to 800 pieces/H
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5-38mm
* Molding:
o Maximum mold plate dimension (L x W): 350 x 380mm
o Maximum mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
o Power: 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
13 Drinking Soda Suppliers
Short on time? Let Drinking Soda sellers contact you.
