We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
Nanjing Xiante Storage System
This is a typical energy storage independent capacity expansion project.Due to owner's business expansion, the original transformer is overload for long time.In order to avoid the risk of electricity consumption, an energy storage system is installed. This system will dynamically adjust the discharge power according to the load situation during daytime, so as to ensure transformer is in a safe operating range at any time.
This system could reduce capacity charge by provide a large amount of power to the load in a short period of time after slowly charging.
DESCRIPTION
Application of Marine Pressure Water Tank:
The pressure water tank can be used to provide fresh water for living and cleaning of ship and drilling platforms.
Principle description:
The device uses the pressure water pumped by water pump in tank to compress air so as to keep the water in tank under a proper pressure for the use on board.
Main Technical Parameters of Marine Pressure Water Tank:
Capacity: A(0.12m3, 0.2 m3,0.3 m3)
B(0.5 m3,1.0 m3)
C(0.5 m3,1.0 m3,1.5 m3,2.0 m3,3.0 m3)
Working Pressure: 0.6MPa
Design Pressure: 0.7MPa
Strength Test Pressure: 1.05MPa
Tightness test pressure: 0.875MPa
Safety valve open pressure: 0.63MPa
Pillow Plate is a highly versatile panel-type heat exchanger that can be welded, formed, or fitted to meet your exact needs. It can be applied in irregular shapes, at high pressures, high temperatures, or in corrosive environments.
Thermally efficient types of Pillow Plate
1. Immersion heating and cooling
2. Can heating,cooling, or heat preservation outside the container
3. Built-in for heating or cooling, such as internal heated fluidized bed
4. Special heat exchanger
5. Evaporator, Condenser
6. Clamp-on heating, cooling, and temperature maintenance
7. Polymerizer cooling, heating baffles
8. Ice storage
9. Plate heat recovery group
10. Drum Insulation
11. Equipment trough jacket
12. Conical head jacket
13. Dyeing heater
14. Flue gas heat recovery plate group
15. Falling film cold water ( brine ) Unit
16. Built concentrator or reboiler
17. Large built-in bezel set for cooling vegetable oil
Popular Laser Welding High Efficiency Pillow Plate
Features
1. Available in most materials, like stainless steel 304, 316L, 2205 and titanium
2. High operating pressures
3. High operating temperatures
4. No gaskets required
5. Corrosion resistant
6. Easily formed to fit the shape you need
7. Cutouts are easily provided
8. Thermally efficient types of heat transfer
9. Immersion heating and cooling.
10. Clamp-on heating, cooling, and temperature maintenance
11. Integral jacketing for heating and cooling
12. Custom heat exchanger design
13. Evaporators
14. Condensers
15. Easily cleanable, attractive finishes available
16. Low pressure drop design
17. Pharmaceutical and food-grade designs available
18. More active heat transfer surface available
The type of Pillow Plate
Double Embossed
Double-sided pressure molding, usually used for most applications
Suitable for heating and cooling process, generally, the thickness on both sides plate are the same.
The materials can be stainless steel , hastelloy and carbon steel and so on . The different material and thickness can meet different working pressure.
Popular Laser Welding High Efficiency Pillow Plate
Double Embossed Pillow Double embossed pillow is ideally suited as a heat exchanger for liquids or powders and granules. Due to the laser welding technique, a pillow plate having a relatively low wall thickness can withstand (very high) high working pressures. The high degree of design flexibility also offers many opportunities to achieve the best possible product with the best possible heat transfer. Extremely versatile applications Double embossed pillow plates are used, for example, as cooling technology and as heat exchangers in the food industry. Double embossed pillow blocks are deployed for complete installation, such as drop film water coolers, immersion coolers or ice banks. Double embossed foam board for heating and cooling, the use of a wide range of coolants and heating agents, such as water, steam, ethylene glycol, freon, NH3, CO2 and so on.
With good integral property and long service life, flyer steel silo is used for storage of slag, mineral powder, fine powder and fly ash.
The steel silo is constructed with special equipment when it was built. In the process of rolling, the ektexine of the silo was made to a spiral convex band with thickness five times more than the material, and width of 30 to 40 mm, which highly strengthened the carrying capacity of the silo, and make the overall intensity, stability as well as shock resistance preceding over other silos.
Galvanized steel coil with strong anti-corrosion property is used to make the service life of flyer steel silo longer than the other products.
The diameter of the silo is 3-28 m. The theoretical height can reach 30 meters.
Look forward to coorperate with you.
858 Storage Tanks Suppliers
Short on time? Let Storage Tanks sellers contact you.
The technology of storing coal in silos has been used in some power plants and coal mines. Coal storage silo usually use cement silo or steel silo, at present, there are more application of cement silo. However, cement silo take a long construction period and high investment. Lipp steel silo as the leader of steel silo, has been gradually used in grain and oil, brewing, building materials, environmental protection, chemical industry, energy and other industries, such as yidong group, ningbo kangli glass co., ltd, etc.
Lipp silo is well-known by the technology invented by germans named mr.Xaver.Lipp. In 1960s and 1970s introduced to china. In 1980s start application in the field of cement building materials, now widely used in cement plant, grinding station, hydropower station, thermal power station, cement transfer depot, etc.
Our company mainly design, manufacture all kinds of storage tank, gas, reaction kettle, heat exchanger, stirred tank and other pressure vessels.Design and manufacture according to GB testing standards, ASME and PED.Non-standard equipment
Ordering instruction :
1. Processing with supplied drawings and samples by customers
2. Independent design to confirm
You need to provide parameters are as follows:
device traffic, filtering medium,fluid operating pressure, filter precision, operating temperature,the interface size, the interface position and size.
3. Can provide a standard form of filters for customers to choose.
It is working capacity 1000Liter Steam heated emulsifying Tank,Material,All made of SUS316L,others SUS304,Semi-open cover,3-walls with full jacket for heating or cooling and polyurethane insulation,Equipped with ONE complete set of Paddle agitator,motor 1.5kw,speed 60rpm,the other one with a Homogenizer on the bottom,motor 3kw,speed 2800rpm.The others accessories as a CIP automatic-rotating cleaning ball inside,one material Inlet,spare holes,one manhole,one ordinary thermometer(0-150C),one ordinary pressure gauge,two medium inlets,one medium outlet,one control box(Power on/off,Stirring on/off,temperature display etc)one bottom material outlet discharge etc,the tank with Platform & staircase. as per the final production drawing.nner 3mm,inner normal pressure,Jacket 3mm,working pressure 0.2mpa,design 0.25mpa,Insulation layer 50mm,outer 2mm.Inner&outer mirror polish.Power Supply:380V/50HZ/1-phase.
Hello, This is Jonshua from Weihai Haiwang Technology Co.,Ltd. The leading manufacturer of mining machinery in China since 1989 and is one of the largest cyclone manufacturers and suppliers in the Asian-Pacific region.
If any new inquiry of Filtration Equipment ,Mineral Processing EPC, Mining Machine, Hydrocyclone, Heavy Medium Cyclone, High Frequency Linear vibrating Screen , We have been a professional mineral processing equipment manufacturer in China for almost 30 years. We are very glad to help you.
1.what the material that you deal with?(iron,copper,chorm ore,or other)
2.what the overflow and underflow do you want? and what the machine use which process or stage?
3.and whats your capacity required and your
solid concentration
if you can answer above question,i would be appreciate.
We are the largest manufacturer of glass fused to steel tank in China since 1989,now we are the only one can produce AA(acid and alkali proof)steel sheet in China. We design our tank strictly according to AWWA,OSHA,EN ISO28765 ect. international standards. We have the most advanced production line,and it pass the ISO 9001:2008 quality system standard.
Application:
Water storage/treatment
Agriculture dry bulk storage
Anaerobic digester/ biogas storage
Power and energy
Sewage treatment
Advantages:
1. Color can be customized,with beautiful appearance
2. Not subject to weather and site condition
3. Easy construction,no need any big equipments
4. Over 30 years' service life,maintenance cost is little
5. Can be dismantled and rebuilt
6. With Excellent anti-UV, will not aging.
7. Cost effective
Center Enamel Co., ltd. is a manufacturer dedicated in vitreous enamel products, since 1989. We are not only the enamel production base in China , but also the first one to produce double -sides enamel hot-rolled steel in China. We are the largest and the most professional enamel bolted tank supplier in China.
Our tank can be applied to drinking water storage, waste water treatment,anaerobic digester ect. application. We exported tanks to USA, Australia, Malaysia,Thailand,Indonesia ect. 35 countries.
Our company covers an area of 80,000 square meters, 2013 total annual turnover nearly 30 million dollars, including 7.6 million dollars for GFS tank. Products have already been exported to more than 20 countries.
We are the largest manufacturer of glass fused to steel tank in China since 1989,now we are the only one can produce AA(acid and alkali proof)steel sheet in China. We design our tank strictly according to AWWA,OSHA,EN ISO28765 ect. international standards. We have the most advanced production line,and it pass the ISO 9001:2008 quality system standard.
Application:
Water storage/treatment
Agriculture dry bulk storage
Anaerobic digester/ biogas storage
Power and energy
Sewage treatment
Fire water storage
Advantages:
1. Color can be customized,with beautiful appearance
2. Not subject to weather and site condition
3. Easy construction,no need any big equipments
4. Over 30 years' service life,maintenance cost is little
5. Can be dismantled and rebuilt
6. With Excellent anti-UV, will not aging.
7. Cost effective
We are the largest manufacturer of glass fused to steel tank in China since 1989,now we are the only one can produce AA(acid and alkali proof)steel sheet in China. We design our tank strictly according to AWWA,OSHA,EN ISO28765 ect. international standards. We have the most advanced production line,and it pass the ISO 9001:2008 quality system standard.
Application:
Water storage/treatment
Agriculture dry bulk storage
Anaerobic digester/ biogas storage
Power and energy
Sewage treatment
Irrigation water storage
Advantages:
1. Color can be customized,with beautiful appearance
2. Not subject to weather and site condition
3. Easy construction,no need any big equipments
4. Over 30 years' service life,maintenance cost is little
5. Can be dismantled and rebuilt
6. With Excellent anti-UV, will not aging.
7. Cost effective
The bigger the impeller diameter is, the more powerful the agitating capacity is.
The higher the impeller rpm is, the more powerful the agitating capacity is.
The umbrella shape of impeller greatly increases the agitating capacity.
That the agitating capacity is boosted improves the circulation ability of minerals and reagents.
The baffle can compress negative pressure to a limited space and improve suction capability. As a result, the circulation capacity is enhanced.
Umbrella-shaped impellers produce huge downward pressures, increasing the suction and circulation capacity.
Only when the surface of mineral is completely reacted with reagent, the beneficiation standard is improved.
Fernise pull-out storage baskets helps to organize and maximize the wardrobe space effectively. It saves your time to collecting things and can be mounted as an add-on for existing wardrobes. It is widely applied to high-end furniture industry and individual home improvements.
Condition: new
Capacity: 5~200 m3, 5-200m3
Place of origin: zhejiang, china (mainland)
Brand name: cyy energy
Model number: cyyst
Dimension(l*w*h): customerized
Weight: 2-30t
Certification: asme/tped/dot/gb
Warranty: 5 years
After-sales service provided: engineers available to service machinery overseas working pressure: 1~40bar
Medium: lox/lin/lar/lng/lpg
Condition: new
Capacity: 20m3
Place of origin: zhejiang, china (mainland)
Brand name: cyy energy
Model number: cyyt
Dimension(l*w*h): customerized
Weight: 2-30ton
Certification: asme/gb
Warranty: 5 years
After-sales service provided: engineers available to service machinery overseas material: stainless steel
Medium: lox/lin/lar/lco2/lng portable gas station
Working pressure: 1~40bar
Main business: craft beer equipment\packaging equipment/turnkey brewery equipment/s/s tanks.
Cassmanis the most famous and leading supplier of beer brewing equipment in china, we focus on the full range of the whole brewing process, which included the raw material handing system, brew house and fermentation system, cold/hot water system, control system etc. What we provide is the turn key project for the craft breweries.
Cassman facility: the plant covers an area of 8, 000 square meters, with four workshops, equipped argon gas welding machines, auto polish machine, stainless steel handling machine. Certified with self-support imports and exports right, obtained the iso and ce certification. More than 20 engineers and brew masters were registered.
Cassman is always striving to make the products more reliable, energy-saving and beautiful, provide the joviality environment for the unique craft beer.
-warranty: 12 months
-certification: iso9001 / ce
-stainless steel 304 or 304l or copper cladding
-heating source: steam, electric heat and direct fire
-plc control orsemi-automatic control
-100% tig welded and sanitary polish
-thickness: inner 3mm, jacket 2mm, insulation 80mm
-design pressure 2 bar, tested at3 bar
-side manway
-360 degree cip spray ball
-temperature and pressure gauges
-stainless steel 304 brewing platform
-option: vapor condensing system
Flexitank is used in the 20 feet container which can be transported by sea or by train, which is largely used in the transportation of bulk liquid, as for sunflower oil. palm oil. cooking oil, lubricant oil and glycerin, non hazardous chemicals. Any liquid that are not in the MSDS list all can be packed with flexitank.
The composition of the flexitank
1.food grade pe and pp woven fabric
2.3” ball valve or butterfly valve, with valve protection bulkhead
3.Warning labels, tie clips and tapes, camlock
4.Air vent if available,
5.Accessories :steel bars. Corrugated paper, bulkhead.
The classification of flexitank by loading measures
1.Top loading &discharging flexitank
2.Bottom l loading &discharging flexitank
3.Top loading & bottom discharging flexitank
The advantages of flexitank
1.Cut transportation cost greatly,
2.Convenient to use and dispose, environment friendly.
What are we good at?
1. Quality control teams
2.Be at our customer’ position
3.Professional manufacture and operator
4.Reputed company with all the certificates of operation
FRP water tank is a new product used internationally . Assembled using FRP board possessing the advantages of non-pollution, light in weight, corrosion proofing, long service live and simple maintenance. High water quality is assured for the use of food grade resin. Our FRP water tank is recommended by China Construction Material
water tank Application
Industry, Mining, enterprises, public institution, residences, hotels, restaurants, reclainmed water disposal, fire controlling, other buildings to serve as the water storage facilities for drinking water, other water storage usage.
water tank structure
The SMC FRP water tank is make up of SMC moulded signal board,sealing material, metallic structure, and plumbing .We can according to customers requirements assemble 1-1000M3 water tank.
water tank Specifications
Clean Water-We deliver clean water as it is to you. The tank is designed to satisfy the following basic requirements by using panels.
* Clean and Hygienic
* Long life
* No leakage
* Stable structure
* Easy transportation
* Easy assembly
* No limit in size
The panel size respectively is 1m*1m*, 1m*0.5m, 0.5m*0.5m.
woodenpackage
858 Storage Tanks Suppliers
Short on time? Let Storage Tanks sellers contact you.
