Characteristic of hopper-bottom silos: volume: 7.2m3-1855m3 capacity: 5tons-1250tons diameter: 1.8m-11m
Full function of hopper bottom silo system
1, cleaning, drying and storing.
2, loading and unloading automatically and efficiently.
3, ventilation system can keep grain in a good quality.
4, temperature system for testing unusual temperature.
5, dedusting system for protecting environment
Standard packing inside container or as you required
ZB0603-38 (General model)
Mirror Polished 316 stainless steel Marine Boat Yacht Caravan Water Tank Deck Fuel Filler Keyless
Description:
*ã??Fitmentã??Suitable for 50mm/2 inches 38mm/1.5 inches diameter Gas hose, and cap contains a high grade O-ring seal.Fits for Boats, yachts, caravans, RV, trucks, tractors and trailer fuel tanks etc.
*ã??Easy to Installã??Humanization design, complete with stainless steel retaining chain, to avoid losing or misplacing cap.Great design sturdy and easy to install.contain Key Cap
*ã??Made of High Quality Materialã??Made with high quality stainless steel for maximum durability.
*ã??Durableã??Anti-corrosion, anti-rust and wear resistant.Excellent seawater corrosion resistance and high oxidation resistance.
Pressure tanks are used in closed water circulation systems to balance water flow and pressure, avoiding frequent opening of safety valves and frequent replenishment of automatic water valves. The expansion tank not only serves to accommodate the expansion water, but also serves as a makeup water tank. The expansion tank is filled with air and can obtain a larger volume to accommodate the expansion water. High and low pressure expansion tanks can use their own pressure to supplement water to the pressure stabilization system in parallel. The control of each point of this device is interlocking reaction, automatic operation, small pressure fluctuation range, safe and reliable, energy-saving, and good economic effect.
858 Storage Tanks Suppliers
Short on time? Let Storage Tanks sellers contact you.
What is a storage tank
The design is based on the given working conditions and process size, considering the requirements of manufacturing and installation and maintenance, the correct selection of materials for each component load analysis, stress analysis.
Material:carbon steel stainless steel 304, 316L,duplex stainless steel 2205,Titanium etc.
Wall thickness: 3mm-20mm
Pressure range:0.1-10MPa
Layer: single layer,double layer (customizable)
Volume:50L-30000L
Installation :vertical /horizontal foods
Application filed :Food, pharmaceutical industry, chemical industry, dairy products, fruit juice beverages and biological engineering etc.
Advantages
1.Easy cleaning :Internal and external mirror polishing,fillet welding of tank no dead angle
2.Easy operation :Humanized structure design
3.Discharge outlet at bottom:It suits the purification area of pharmaceutical industry and the liquid compounding of food or fermentation and the treatment of water .
4.Flexible customization :The sampling place, inlet and outlet of liquid, hole for reservation and inlet and outlet of head/cold medium can all be customized to meet your unique processing and storage needs.
� Shandong Qinglei Environmental Technology Co.,Ltd is an equipment manufacturer integrating design, production and assembly. Our products include heat exchangers, heat exchange units, pressure vessels, storage tanks, TCU temperature control systems, reactors, distillation towers, VOCS purification and recovery systems, vacuum� frying machine.
If you need any of them,please donot hesitate to let me know,I will reply you ASAP.
Tank volume: 3.5 cu.ft./ 0.5 liter
Tank material: aviation aluminum
Tank size:35*6*6 cm
Color: green, blue, black, custom
Usage scenario: backup air for deep diving, snorkeling, fire protection, call fall into river self-rescue, training, clean boat bottom etc.
Logo: customizable
Breathing time:5-10 minutes
Limited depth: 10m/ 32 feet
Product information: 1* 3.5 cu.ft./ 0.5 liter, 1* breathing head
Product name: microwave digestion tank
Specification: BZH-55ml
Temperature resistance: - 200 +260
Size: total H 203mm, tank H 191mm
Material:
Outer tank:Yuhang fiber composite/Kevlar fiber
Inner tank: body TFM, cover PFA, spring cushion PTFE/TFM
(PFA can also be selected for individual instrument inner tank)
The advantages of the sealed dissolving bomb show
It consumes less acid and solvent, and is specially designed for the geological industry. It has the advantages of practicality, compactness and sealing.
1. Good sealing, the elements are not easy to volatilize;
2. Strong pressure bearing capacity and good permeability resistance;
3. Scientific design, more resistant to deformation;
4. Select high-purity experimental grade TFM (or PTFE), the blank value is lower, and the analysis data is more accurate;
5. Professional manufacturers with 30 years of design and production experience, can customize various sizes and styles (such as double-layer inner cup digestion tanks, Teflon coated digestion tanks, etc.), and the inner cup material can be made of PFA.
High pressure digestion tank, it can decompose of refractory material is a kind of airtight container, in the gas phase, liquid phase, plasma mass spectrometry, atomic absorption and atomic fluorescence spectrum in the chemical analysis methods such as sample preparation, used in food, medicine, the centers for disease control and prevention, more dairy products, environmental center, agricultural products, seafood, aquatic products and other industries to green tea art, rare earths, fruits and vegetables, grain and oil, eggs, meat, milk powder, etc in the lead, cadmium, chromium, methyl mercury, inorganic arsenic and other heavy metal detection.
Our unit digestion tank solved the customer in the process of digestion in a large number, high requirements, small volume and difficult to resolve the problem
Microwave digestion method is applicable to digestion of food, environment, polymer, cosmetics, pharmacy, chemistry, petrochemical and other samples. It has the characteristics of short digestion time, high digestion efficiency, stability and uniformity. It not only saves energy and environmental protection, but also can easily digest various insoluble samples.
Anton parr HVT50 microwave digestion tank characteristicï¼?
1. The inner tank is made of modified polytetrafluoroethylene (TFM);
2. The materials are selected, and no return material is added. The clean processing environment optimizes the processing technology to ensure an extremely low background;
3. TFM is resistant to high and low temperatures - 200~+260 â??, with lower blank value, better deformation resistance, penetration resistance, and stronger recovery under high temperature and high pressure;
4. The experimental data is no less than the original factory, and the cost is low, which greatly reduces the cost of consumables purchased by many scientific research institutions;
5. The production process specially developed by our factory ensures the smoothness of the super long inner tank of special manufacturers (such as CEM in the United States);
6. The inner tank can be used together with the acid flushing electric heating plate of our factory as a special acid flushing device at the later stage of the experiment.
PFA sample dissolving tank is also called sample dissolving cup, digestion bottle, tubular bottle, etc; It is widely used for digestion of geological, geological and mineral experimental samples and dissolution of samples at medium and low pressures, supporting ICP-MS/ICP-OES analysis and other trace analysis experiments. According to the requirements of the experiment, there are U-bottom, flat bottom and V-bottom designs. It is used with the electric heating plate of our company, especially the perforated digestion instrument.
characteristic:
1. translucent appearance, smooth inner wall, no water hanging, easy to clean;
2. High and low temperature resistance: the operating temperature is - 200~+260 â?? (it is better not to exceed 150 â?? under closed conditions);
3. Threaded port, excellent sealing, no air leakage;
4. Insulation resistance: the dielectric property is independent of temperature and frequency;
5. Anti pollution: low blank value of metal elements;
6. Extremely low dissolution and precipitation, it is an excellent utensil for storing reference materials, highly corrosive, expensive and ultra pure reagents;
7. When falling from a height of 1.2m above the ground, the bottle body will not crack, the bottle cap will not fall off, and there will be no leakage. The open mouth can be autoclaved;
8. No toxicity: It is physiologically inert and can be implanted into the body;
9. The cover and body can be numbered without confusion;
10. The design of V-shaped bottom makes it more convenient to collect a small amount of samples; The U-shaped bottom design is suitable for the detection of geophysical and geochemical samples.
1.Good sealing.Will not leak
2.High compressive strength.reasonable product structure sress tested over 200 times for immutability
3.Small footprint
4.Easy to install Ready to use after installation
5.Long service life, can be used for 70 years
6.Low cost.The total cost is 65% of the concrete structure
7.Easy to use
Design Code: ASMEVIII-I
Design Pressure: Up to 35 Mpa
Material Code: From ASME & ASTM
Diameter Range: Up to 4 Meter
Length Range: Up to 50 Meter
Available Material:CS, SS, Alloy, High Alloy
Major Markets: Refinery, Petrochemical, Chemical, Offshore, Pharmaceutical, Marine industries
For most farmers, water and fertilizer storage tanks play an important role in farming. This precious resource is the lifeblood of everything from crops to cattle. Reliable and on-demand water supply is essential for operational survival. The economics and forecasting of agriculture-related industries are critical. As one of the world's leading tank suppliers, we are committed to providing farmers and ranchers with agricultural and irrigation tank solutions to store water, chemicals, feed, whether it be soybeans, turf or sunflowers.
Glass Fused to Steel agriculture water storage tanks are the leader of Water Storage Solutions, which is widely used as water and fertilizer storage tanks in Farm Plant. With the advantage of both GLASS and STEEL, Glass lined steel agriculture water storage tanks can resist corrosion of Waste Water of PH 1 - 14.
About Center Enamel Co., Ltd
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel provides industry glass coated steel water storage tanks with AWWA D103-09 standards. Our factory glass coated steel water tank is a unique tank finish. Two materials are fused together to achieve the best of both materials the strength and flexibility of steel combined with the corrosion resistance of glass. Applied to both interior and exterior surfaces, Glass-Fused-to-Steel is able to provide many years of trouble free service in harsh environments.
Center Enamel's GFS water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.
Advantage of GFS water tanks
---- Short construction period,low project cost;
---- Superior corrosion resistance, service life is more than 30 years;
---- Convenient installation, easy construction, good quality;
---- Beautiful appearance, color can be customized;
---- Not subject to weather conditions;
---- No need big installation equipment;
---- Easily expand, dismantle, move.
About Us
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel Co., Ltd is the industry leader and has been designing and manufacturing and installing Stainless Steel Bolted frac sand storage tanks for more than 30 years. We provide high quality Stainless Steel Bolted frac sand storage tanks. The ability to place the bolted tanks in shipping containers allows us to service the entire world. With more than 10, 000 storage tanks successfully installed in 65 countries and thousands of applications, no other Asian company can match Center Enamelâ??s bulk tank experience in the design, manufacture and installation of bulk storage tanks .We are one of the few manufacturing companies that fabricates our own Stainless Steel Bolted frac sand storage tanks ensuring product quality.
The construction speed of the Stainless Steel Bolted storage tank can be increased by three times, saving the construction and life cycle cost for our customer. All tank panels are manufactured in the factory and shipped in full to the construction site in time. Experience, expertise and efficiency make Center Enamel the best choice for buying frac sand silos . Our frac sand storage tanks capacity ranges from 20m�³ to 20,000 m�³,
Our Stainless Steel Bolted storage tanks can withstand abrasive wear and have the longest service life of any tank. After decades of field testing and application, Center Enamel bolted steel frac sand storage tank is the best choice for all dry bulk storage tanks on the market.
Coating color dark blue, dark green, white, and customized
A standard steel plate size effective size 2400mm x 1200 m
Steel plates thickness 3mm - 12mm, depends on the diameter & height
Coating thickness 0.25mm - 0.4mm, two coatings internal and external
Acid and alkalinity proof standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14
Adhesion 3,450N/cm
Elastic same as steel sheet, around 500KN/mm
Hardness 6.0 Mohs
Service life >30 years
Spark test >1500 V
Permeability gas and liquid impermeable
Easy yo clean smooth, glossy, inert, anti-adhesion
Corrosion resistance excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil,
salt fox, organic and inorganic compounds
858 Storage Tanks Suppliers
Short on time? Let Storage Tanks sellers contact you.
