Thermal spraying with zinc wire was 99.99%, when the atmospheric conditions is not in serious corrosion (such as dry weather), can reduce the the purity to 99.95%.Zinc has good plasticity, can draw wire material, used for wire arc spraying and flame spraying.When in the flame spraying, purity of zinc in the process of spraying generally will not change.
Characters
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters.
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
The surface of the zinc wire smooth and bright, broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use.
The raw materials used in all 0# zinc distillation zinc ingot quality, high purity zinc, the zinc content of more than 99.995%, the strict implementation of national standard gb/t470-2008;the raw material aluminum ingot all uses the high-quality aluminum ingot, the aluminum ingot purity is high, the aluminum content above 99.8%, strictly carries out the national standard, the remelting uses the aluminum ingot gb/t1196 - 2008
Characters
1. Zinc aluminum alloy coatings have similar stability with spraying aluminum coatings and the electrochemical protection as well as spraying zinc coating, zinc aluminum alloy coating is an ideal anticorrosion protective coating of sea water.
2. Compared with the zinc wire and pure aluminum wire, it's coating has coherence, the resistance to wear and corrosion resistivity is better as well as the construction of superior performance. The zinc aluminum alloy wire makes the sacrifice anode and sprays coating in the steel and iron component surface layerand it make the component service life lengthen 5-10 times
Specification
Znal content :zn :84-86% al :14-15%
Diameter of zinc aluminum alloy wire :1.2-10mm
Package :bundle (20-100kg)spool/axle(20kg)barrel(50-250kg)
Applicable to ductile pipes, dockyard, power capacitors, power tower, tower, container, derrick, bridges gate, tunnel framework, metal stents, large steel structure surface thermal spraying zinc corrosion protection industry.
Application
Zinc aluminum alloy wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
99.995% diameter 1.6mm zinc wire for metal
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-5.0mm (1.4mm , 1.6mm, 2.0mm, 2.5mm, 3.17, 4.76mm..)
Package:20--50kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Contact
Assortment
Electro galvanized wire ;hot dipped galvanized iron wire
-electro galvanized iron wire
It can be supplied in the form of coil wire, bobbins wire, spool wire, cut wire .
Electro galvanized iron wire, also written as electric galvanized steel wire, or galvanized iron wire, galvanized wire. Electro galvanized steel wire and hot-dipped galvanized steel wire .
Material
Low carton steel wire, q195.
Technical explanation
Electro galvanized wire gauge from bwg8-bwg32
Tensile strength is 45kg/mm2-70kg/mm2
Firmed coating layer
The single roll wire without any inter-cuts of breaks
Characteristicï¹ application
High zinc coating with super in corrosion resistance, firmed and well-proportioned zinc coating, slippery surface, uses in the weaving of wire mesh and reprocess, widely used in industry., agriculture and stockbreeding etc.
-hot dipped galvanized iron wire
Material
Low carton steel wire, q 195.
Technical assortment
Hot dipped galvanized iron wire, zinc coating: 30g/m2-370g/m2
The standard wire guage from bwg8-bwg32.
Tensile strength is 45kg/mm2-70kg/mm2.
The single roll wire without any inter-cuts or breaks
Characteristicï¹ application
High zinc coating with super in corrosion resistance, firmed and well-proportioned and zinc coating, slippery surface. Uses in the weaving wire mesh and process, widely used in industry and stockbreeding etc.
Package
0.3kgs to 1000kgs are available, plastic inside and weaving bag outside.
Before the big pull, there will be a surface treatment: Pickling----Washing----Phosphide-----Soaping----Drying. The treatment function is rust removing, Phosphide and soaping are good for next pulling proess.
Row material
Low carbon steel wire , Q195 or Q235
Advantages
Soften and flexible character
Low costs and economy
Easy to handle or install
Pure zinc wire / wholesale zinc wire 3.17mm zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire /high-quality zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire /cheap zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storaget is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Drum zinc wire price
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storaget is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Spray zinc wire factory
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Cheap zinc wire
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc wire brand
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageït is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire / zinc wire for corrosion resistant
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageïit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package20-25kg/bundle 15kg20kg/shaft 50kg250kg/barrel
Materialadopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications:
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire / zinc wire suppliers
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
Pure zinc wire /zinc wire brands
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Promotions zinc wire manufacturers
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
China manufacturer thermal spray zinc wire 99.995%
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Materialadopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Contact
