Find Verified Computers Electronics Communications Electrical Suppliers, Manufacturers and Wholesalers

Specification
Material : polyurethane coated wire rope
Aperture shape :square or rectangular
Aperture range : 2mm to big
Wire rope diameter range : 1.5mm to big

Description
Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens.

The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering.
This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required.
The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top,
running in a cross-flow orientation, or positioned underneath the rope with the wire.

Features
Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck.
Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths.
The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflex s cloth construction.
The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer
periods between changeover and less downtime during busy screening periods.

The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes,
similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide.
The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion
protection along the hooks.

Pos. Number 135.2 Rear Liner 1.4517 used for Andritz S 125-400 DD Centrifugal Pumps.



The Rear Liner 135.2 suitable for Andritz S Series, the model: S 80-265, S 100-265, S 125-265, S 100-350, S 125-350, S150-330, S125-400, S 150-400, S 200-380, S 150-470, S 200-470, S 250-430, S 350-470, S 500-600, S 600-700.

manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps etc

The OPGW Hardware Fittings are instrument used for surge protection of communication and transmission lines. It replaces the earlier PLCC (using waves as the transport medium) with an optical signal which is faster and distortion free.
a professional manufacturer of OPGW & ADSS cable prefabricated parts with many years of experience. With a factory area of 26,593 square meters, we can produce and transport about 1,000,000 PCS of prefabricated parts (OPGW & ADSS) per year. We have world class certificates such as ISO 9001:2015 certification and are trusted by several companies. More than 15 professional R&D engineers and timely technical support ensure to provide high quality and competitively priced solutions to make customers more profitable in this industry.

The unique design of the lightweight HuaNeng Fitting mechanical suspension supports spans of optical ground wire (OPGW) cables through a wide range of line angle variations. HuaNeng Fitting's mechanical suspension is easy to install while supporting vertical, lateral, and longitudinal unbalanced loads and angular tension without damaging cable strands or affecting fiber performance. Separate bolts
Composition
inner twisted wire, Outer twisted wire, Rubber block and cast aluminum shell.

Uses
To play a supportive role, the optical fiber composite overhead ground wire (OPGW) are hung on a straight line on the tower.