Bend-Insensitive Fiber Jumper Cables are used in a variety of carrier networks and private network environments. The key to manufacturing high-performance fiber assemblies is controlling polish radius, apex offset and fiber undercut.
Bend Insensitive is less attenuation compared with traditional fiber cables and this will make the installation and maintenance of the fiber cables more efficient. In FTTH networks, people require the fiber cables to be bend-insensitive, so that it is easier to deploy in the house.
Another benefit we can get from bending insensitive fiber cables is they are space saving, this is also the trend of future fiber optic network - smaller, denser and more efficient. Many companies are able to provide the bend insensitive fiber optic cables before theofficial standard ITU-T-G657 was made.
Bend insensitive cable support installation with small cable bending radius and compact organizers.
Protection
Riser and Plenum rated bend-insensitive jacket options available
Available in simplex, dual-round and dual zip-cord configurations
Access
Compact jacket design minimizes cable pile up
Industry standard terminations include ST, SC, FC, LC (ask a Clearfield representative for other connector availability)
Investment
Indoor Bend-Insensitive Fiber Jumper Cables offer an economical solution for deploying fiber in any optical network
Environmentally stable, low-insertion loss, minimal back reflection
All assemblies are 100% tested
Technical Specifications
Core Size and Type Singlemode (G.657.A1 and G.657.A2)
Fiber Count Simplex (1-fiber) and Duplex (2-fiber)
Jacket O.D. 2.0 mm
Cable Types Indoor Riser
Connector Types SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC, ST/UPC
Operating Temperature -40°C to 85°C (-40°F to 185°F)
Minimum Performance Specifications for Terminated Multimode Connectors
Connector Type Ferrule Material Polish Type Ins. Loss Typical (dB) Max. Ins. Loss (db)
ST Ceramic PC 0.25 =0.50
SC Ceramic PC 0.25 =0.50
FC Ceramic PC 0.25 =0.50
LC Ceramic PC 0.25 =0.50
Applications
· Date centre
· Telecommunication networks
· CATV
· LAN and WAN
· FTTX
· Broadband networkDate centre
Features
Compliant with 100GBASE-LR4
Support line rates from 103.125 Gbps to 111.81 Gbps
Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF
Digital Diagnostics Monitoring Interface
Duplex LC optical receptacle
No external reference clock
Single 3.3 V power supply
Case operating temperature range:0°C to 70°C
Power dissipation < 6W
Applications
Local Area Network (LAN)
Data Center
Ethernet switches and router applications
Standard
Compliant to IEEE 802.3ba
Compliant to CFP MSA CFP4 Hardware Specification
Compliant to CFP MSA Management Interface Specification
Fiber Optics PLC Splitters provide a cost effective and space saving product suitable to the ever changing networking requirements. With it's compact size,these splitters can be utilized in in-ground and aerial pedestals as well as rack mount systems. Installation is simple using a variety of connector types or fusion splicing.
Sophenol supply Planar Lightwave Circuits which are key components used in FTTx networks. We supply the PLC splitters including 1XN to 64 and 2XN to 32 types, they are with a wide range of working wavelength from 1260nm to 1620nm. The PLC splitter can be with optional various kinds of connectors and cable length, they feature compact size and very good optical performance.
Features:
•Value-added Modules for FTTx
•0.9/2.0/3.0mm Input and Output
•Fan-out Type Available
•Compact package Convenient for Small Application & High Density Areas
•Telcordia GR-1209 & GR-1221-CORE Compliant
•Jacketing Material Rated to -40 to +85 degree Celsius Operating Temperature
•Bend Insensitive G657A fiber
•Low Insertion Loss and PDL
•High Polarization Extinction Ratio & Excellent Uniformity
•Offer Unique Designs and Configurations & Support Industry Standard Applications
Fiber atenuador fibra optica are used for reducing the power of the light in the fber optic network. We supply many types fiber optic attenuators, fixed value fiber optic attenuator refer to the attenuator that reduce the power of fiber light at a fixed value loss, for example, 2dB. Wile adustable fiber optic attenuator can generate adjustable loss to the fiber optic link.
Sophenol offers male to female type fixed attenuators which are available in different connector types, such as LC, SC, FC, ST, E2000 and in different attenuation level from 1dB to 30dB. All our attenuators are manufactured according to industry standards and are 100% fully tested.
Features:
·Simple and reliable structure
·Good reliability and stability
·High Return Loss
·Fixed, Variable and In-line type
Specifications:
Housing: high temperature thermoplastic
Shell: phosphor bronze protects against EMI/PFI interference
Contact: phosphor bronze ,phosphor bronze with 3 to 50u” gold plate
Available in CAT.5E or CAT.6 T568A/T568B wiring, meeting every cabling international requirement
Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6mm
Insertion life :MIN 750 matching recycles
Contact resistance: no more than 2.5mO under normal atmospheric pressure
Electrical:
Voltage rating: 125V AC rms
Current rating: 1.5Amp
Contact resistance: 100m Ohms (maximum)
Insulation resistance: 1,000M Ohms (minimum) at 500V DC
Dielectric strength: 750V AC rms, 60Hz and one minute
Environment:
Storage temperature: -40 to +85°C
Operating temperature: 0 to 70°C
Mechanical:
Housing material: PC UL94V-0
Inner material: flame-retardant ABS UL94V-0
PCB material: FR-4
Thickness: 1.6mm
Contact material: phosphor bronze stamp and PIN T=0.35mm
IDC contact material: phosphor bronze, T=0.50mm with nickel plating
Wire: 24 to 26AWG
The MPO/MTP is a multi-fiber patch cord suitable for high-density back plane and Printed Circuit Board (PCB) solutions in data and telecom systems . Used in transmitters and receivers , this connector offer up to 12 times the density of standard connectors , providing significant space and cost savings .
Precision molded MT ferrules , together with metal guide pins and precise housing dimensions ensure fiber alignment when mating. Mass termination is combinations of 4 , 8 or 12 fiber ribbon cables are available . Single-mode versions are offered with premium low-loss or standard and multimode versions are also available. Cable types include bare fiber ribbon and ruggedized ribbon (PVC Jacketed) . Push-pull latching mechanism with audible click ensures proper connection .
Features:
• Push-On/Pull-Off latching connector
• Either 4 , 8 , 12 & 24 fibers available
• Bare fiber ribbon type , ruggedized type and fan-out cord available
• Precision guide oin assures fiber alignment at mating
• Meet IEC61754 , TIAFOCIS 5/604-5 , bellcore GR-143 requirements
• High density and economical solution for mass termination fiber
Advantages :
• No on-site assembly necessary
• Simple reconfiguration
• High Packing fraction
• Various Configurations
1.Comply with ansi/eia, rs-310-d;iec297-2; din4191:part1; din41494: part7; gb/t3047.2-92 standard, compatible with 19" international standard, metric system and etsi standard.
2.Knockdown and simple design, low cost, easy installation
3. Optional accessories(cable management, wire management, cantilever shelf, drawer flat)
4.19"frame, made by 2mm profiled steel, perforated at both sides
Color:ral9004/ral7035
Specifications:
1). Size: L2700*W1000*H4500mm
2). Level: 3level beam then 4level goods,level-hight can be adjustable freely
3). Loading Capacity: 600~5000kg/level
4). Finished: Powder coated
5). Be fit for: Pallet goods with pallet size 1200*1000mm
Notes:
1). This rack can be dismantled and assembled freely by yourself;
2). This rack can be made as per customer's special requirements:size,level,loading capacity,pallet size and powder coated color etc.
Specifications:
1). Size: L2700*W1000*H4500mm
2). Level: 3level beam then 4level goods,level-hight can be adjustable freely
3). Loading Capacity: 600~5000kg/level
4). Finished: Powder coated
5). Be fit for: Pallet goods with pallet size 1200*1000mm
Notes:
1). This rack can be dismantled and assembled freely by yourself;
2). This rack can be made as per customer's special requirements:size,level,loading capacity,pallet size and powder coated color etc.
1). Size: based on pallet size
2). Level: to order
3). Loading Capacity: to order
4). Finished:Powder coated
5). Be fit for: with pallets to put goods
Notes:
1). This rack can be dismantled and assembled freely by yourself;
2). This rack can be made as per customer's special requirements:size,level,loading capacity,pallet size,powder coated color etc.
Specifications:
1). Size: to order
2). Level: to order
3). Loading Capacity: 100~1000KG/two cantilevers
4). Finished:Powder coated
5). Be fit for: Directly put long products.
Notes:
1). This rack can be dismantled and assembled freely by yourself;
2). This rack can be made as per customer's special requirements:size,level,loading capacity,powder coated color etc.
Specifications:
1). Size: L2000*W600*H2000mm
2). Level: hen 4level goods,level-hight can be adjustable freely
3). Loading Capacity: 100~200kg/level
4). Finished: Coated
5). Be fit for: Directly put goods on it
Notes:
1). This rack can be dismantled and assembled freely by yourself;
2). This rack can be made as per customer's special requirements:size,level,loading capacity and powder coated color etc.
Specifications:
1). Size: L2000*W600*H2000mm
2). Level: 4level board then 4level goods,level-hight can be adjustable freely
3). Loading Capacity: 300~500kg/level
4). Finished: coated
5). Be fit for: Directly put goods on it
Notes:
1). This rack can be dismantled and assembled freely by yourself;
2). This rack can be made as per customer's special requirements:size,level,loading capacity and powder coated color etc.
