Absolutely new modern service is available for you with a new GPS signals jammer - a GPS jammer which can block any GPS signal and actually make you perfectly invisible for spies.
It is a GPS jammer used for cars blocks practically most signals of GPS tracking system and L1, L2 and L5 bands. While using this GPS tracking jammer, you are blocking all GPS signals in 15 meters radius and each GPS tracker will be neutralized in or around your car.
The power source of the GPS tracking jammer is an embedded rechargeable battery. The battery works for 2-3 hours. Power adapters are also useful to supply your tracking jamming device directly and turn it on at every time you want.
This GPS jammer is a car portable and GLONASS jamming device and its technology was developed in Sweden. It is able to avoid any kind of tracking. This device is easy in usage and handheld, so you have a protection from those who want to disturb your privacy.
At a Glance:
Jammer covers such civil GPS systems as L1, L2, L5
Approximate jamming radius â??Up to 15 meters
Useful cooler for durable work
The rechargeable battery is built-in
It includes power adapters for direct supply
Rubber/SMA screw antennas
Compact size, imperceptible, completely portable
Easy usage and guaranteed blocking ability
Specification:
GPS Tracking Channels: GPS L1, GPS L2, GPS L5
L1(1500-1600MHZ)
L2(1200-1300MHZ)
L5(1100â??1200MHZ)
Power: 75dbm
Operating Zone:Up to 15 m
Power Supply: 2 special power adapters/battery
Operating Current: about 1100mA
Battery Characteristics: Li-ion 8.4V 2600mAh, works for 2-3 hours, charges for 2-3 hours
Adapters Description: AC adapter: 110V-250V â?? DC 5V (2000mA), automobile adapter: 12V-24V DC 5V â?? (2000mA)
Antennas: 3 x 3dbm rubber isotropic SMA
Size: 111/190x62x35mm
Weight: Jammer - 280 g, Full package â?? 1 kg
Temperature: 0 C â?? 50 C
Air Humidity: up to 80 %
Accessories:
GPS jammer
AC adaptor
Car adaptor
Antennas
Camouflage Design Fabric Material Portable Jammer Case
Product Description
300W High Power VHF UHF NMT CDMA Single Jammer (Waterproof & shockproof design, it is specially customized to accommodate a fully integrated broad band jamming system which provides the ultimate solution for Military and Police convoys or VIP protection.
At a Glance
6 modules are controlled separately and also can work simultaneously.
Each module with antenna can be used as a single jammer.
The pelican case is portable (can be carried like a suitcase).
Can be fixed in car and temporary occasion.
Frequency band is optional.
With excellent heat dispersion.
Specification:
6 Bands Walky-talky (VHF):
Walky-talky (UHF/300MHz)/135-155MHz
Walky-talky (UHF/350MHz)/155-175MHz
Walky-talky (UHF/400MHz)/300-350MHz
Walky-talky (UHF/450MHz)/350-400MHz
Cellular NMT/400-440MHz
Cellular CDMA 450/440-480MHz
Total Output Power:300W
Control:Each bands can work independently
Housing Waterproof & shockproof design suitable indoor or outdoor use
Size:56*46*27 cm
Total System Weight:Approx 60 kg (with omni directional antennaS.)
Humidity:Up to 80%
Operation Temperature:-20 ...+50 Centigrade degree
Antenna Type:6pcs External( 2-3dBi ) omnidirectional ( Standard )
Shielding Range 300 to 500m ( signal strength
High RF power, cover 100% drones UAVs Like Dji Phantom 4, Phantom 3 Professional, Advanced, Standard series, Inspire Series...
Directional Jamming range: 300~2500 Meters
6-8 Bands in One Device.
More details and specifications of this selectable handheld 2G 3G 4G Lojack jammer are just as follows, if you want to know more just come and get the overall information.
Advantages
Each unit can jam up to 6-8 frequency bands simultaneously.
Continuous operation even in hot climates with no time limits.
Design for outdoor installation.
Secure design to avoid sabotage.
Antenna type options-Omni or directional antennas.
Selection of antennas to provide more flexibility regarding jamming coverage.
Additional option: wireless RC or Ethernet PC remote control.
100% Safe VSWR over protection for each modula.
Specifications
Total output power:600W
Jamming Range: Up to 2500m (depend on cell phone signal Length)
Power Supply: AC 110 or 220V, DC 12V or DC 24V (Option)
Antennas Details: high-tech rubber (8 units)
Dimensions Of Device: 450x380x350mm
Weight Of Product: 35.00kg
Accessories
8*Antennas
Car Charger
AC Charger
Remove Control (Option)
Suitable for almost all current money in the market.
Unique advanced detecting technique, and dynamic quantificational analyze, provide you accurate and reliable detecting result.
Magnetic distribution detecting: Advanced high-sensitivity magnetic sensor, to analyze the feature of special character of money by dynamic quantificational analysis.
Detection of the ink on the note: using IR ink detecting technique to detect the special character of certain IR ink on the note, achieve the detecting goal.
Sound alarm and light caution when fake notes come across.
Upgrading jack, easy for its promotion.
More portable and more convenient.
update software by USB
Specifications:
Notes available:EURO Note denomination 500,200,100,50,20,10,5
Working voltage: 4.5V
Working current: < 0.1A
Power consumption after power off : �?� 0.1-0.15mA
Duration of Non-stop working > 3 Hrs
Weight: 73g
Applied ambience:1.temperature: 0~40�??
2.humidity: �?� 90%RH
3.without the interfere of strong light and magnetism
1.Simple and fashion: appearance is created by top professional design masters, highlighting simple fashion, classic and elegant design style.
2.Scope: banknotes, checks, drafts, invoices, certificates, passport, cash all over the world.
3.Detect method: ir detection.
4.Automatic induction function: pull the banknote or document out of visual area, the device will automatically observe the banknote. Directly perceived through the screen, see the amplified images clearly.
5.Simple and easy to operate.Small and light, easy to carry.
6.Both can be used to identify notes authenticity, and can carry on business training.
2220 Safety Security Equipment Suppliers
Short on time? Let Safety Security Equipment sellers contact you.
High-risk security situations do not leave any margin for error thus requiring intricate security procedures designed to ensure safety and piece of mind. The TM-915 has been created specifically with this in mind. TM-915 mainly used in detecting the close state of door and window, when the door or window opened as unknown reason and the detector will send out specific radio wave to alarm host to achieve remote alarm.
1.Wireless communication with Alarm Host;
2.Rolling code for anti-crack;
3. Super low power consumption;
4.Low voltage alert;
5.Anti High-frequency interference.
High-risk security situations do not leave any margin for error thus requiring intricate security procedures designed to ensure safety and piece of mind. The TM-915 has been created specifically with this in mind. TM-915 mainly used in detecting the close state of door and window, when the door or window opened as unknown reason and the detector will send out specific radio wave to alarm host to achieve remote alarm.
1.Wireless communication with Alarm Host;
2.Rolling code for anti-crack;
3. Super low power consumption;
4.Low voltage alert;
5.Anti High-frequency interference.
Smoke and flames from a fire are easy to see, but a fire that begins in a vacant part of the house or starts in the middle of the night can spread undetected. Once a fire starts, it can grow quickly. So a smart smoke detector is recommended installed to protect your property and family.
GD-100 from Ansee is a high stability and low power consumption wireless smoke detector. By adopting optoelectronic processing technology and single-chip micro-processing technology, it has features such as high stability, easy operation, high detection and anti false alarm performance. When smoke enters the detection area, the detector will send out the light and sound alarm signal, and also send the wireless alarm signal to the alarm host. This smoke detector can be widely used in home living area, building, villa, factory building, market, warehouse, office building etc. to make sure the safety.
1.Audible & Visual Alarm;
2.Wireless communication with Alarm Host;
3.Anti High-frequency interference;
4.Intelligent environment analysis to avoid fault alarm;
5.Rolling code for anti-crack;
6.Super low power consumption.
BWR-01A is a fuel gas detector with high stability, used for checking the leakage of fuel gas and increase the safety. It adopts advanced catalytic gas sensor with high stability and sensitivity features. The detector supports microprocessor technology, it can trigger light and sound alarm, and remotely send related gas density value to alarm host by RF. It is suitable for areas where gas leakage may easily occurs. The gas detector can be used standalone, also can work as accessory in smart home application to realize remote alarm.
1.Audible & Visual Alarm;
2.Wireless communication with Alarm Host;
3.Anti High-frequency interference;
4.Automatic Fault Detection Indication;
5.Rolling code for anti-crack;
6.High Reliable Catalytic Gas Sensor.
WD-01A is a smart curtain controller for modern smart home system. By connecting to Ansee IP Camera wirelessly, it can control opening/closing curtains remotely through cellphone anywhere. WD-01A adopts a motorized chute structure to realize full on/off or stop with just one click. User can check the curtain status in cellphone. Besides, there is manual control function on site.
Ansee K series Smart Light Control Switch replaces a standard light switch in your home and can be controlled remotely with an Android/IOS smart phone or tablet or by touch the switch, which allows you to turn lights on and off from anywhere. Remote control function is available after connecting the switch with AX-360 IP Camera. By working with AX-X03 series alarm host, the switch can turn on light automatically after once receiving alarm signals.
After connecting with alarm host, KG-100Z is not just a remote switch. Its stand-alone solution can fit well to your smart home by time-switch, energy saving, ease use of electricity.
1.Wireless communication with Alarm Host;
2.Remote control through cellphone;
3.Anti High-frequency interference;
4.Rolling code for anti-crack;
5.Super low power consumption.
RC-915 allows you to operate your Alarm system remotely. Using this controller, you are able to arm and disarm the system remotely when you are outside. It even has a panic button you can use in an emergency. This remote controller is compatible with all Ansee alarm host.
1.Wireless communication with Alarm Hostï¼?
2.SOS Panic Buttonï¼?
3.One-key arming and disarmingï¼?
4.Mute Alarm
The mini 2 zone panel HS-CK1002 have Master panel and Slave panel. One Master panel can connect 31 Slave panel, and the Master panel could show the fire and fault of all slave panel. The slave panel can only show itself fire and fault.
2. Specifications
Item No.
HS-CK1002
HS-CK1004
HS-CK1008
HS-CK1016
Zones
2
4
8
16
Sound output
1
1
2
4
AC power
220VAC/50Hz
220VAC/50Hz
220VAC/50Hz
220VAC/50Hz
Battery
Sealed lead-acid only
Total DC24V system power
3.0 amps
Max current per NAC
1.25amps
Max battery charging capability
18AH
Cabinet weight(net/gross)
3.5/4kg w/o battery
6.0/6.6kg w/o battery
6.0/6.6kg w/o battery
6.0/6.6kg w/o battery
3. Features
our Style B (Class B) Initiating Device Circuits (IDCs).
One Master Panel also has two zones, each zone can connect max.25 conventional detectors.
One slave Panel has two zones, each zone can connect max.25 conventional detectors.
The Mater panel could show the fire and fault of all slave panel. The slave panel can only show itself fire and fault.
2 wire 9V-28VDC powered conbined Smoke detector and Heat Detector electronic conbined fire alarm HS-FT103
1pc/blister box(103*103*55mm,155g) ;60pcs/carton box
They work perfectly with all conventional intelligent fire control panels
Advanced MCU Expert Algorithm Software.
Easy installation and maintenance
Durable sensor head, no need for replacement
HS-SB106 Manual Call Point, Designed for Conventional Fire Alarm Systems and Security Alarm system for reporting fire or emergency condition by pressing its breakable glass. The manual call point can be test by a test key without breaking the glass.
2. Specifications
Name
6" Alarm Bell
Manual call point
Product category
2 wire, Compatible with all existing conventional fire alarm control panel
Item No.
HS-JL188-6
HS-SB106
Operating voltage
DC24V
DC24V
Alarm current
70mA @ DC24V
30mA @ DC24V
Alarm sound intensity
Minimum 95dB
N/A
Dimension
Diameter 155mm, height 45mm
88mm*88mm*52mm
Weight
650g
172g
Features
Easy to install bracket
Break glass
3. Features
a. Available for flush or surface mounting
b. Plastic film on glass
c. Test key inserted from side
d. Open circuit with series resistor
e. Suitable for the majority of conventional fire alarm systems
The manual call points provide a textured finger-hold area that includes Braille text.
In addition to PUSH IN and PULL DOWN text, there are arrows indicating how to
operate the station, provided for non-English-speaking people.
HS-SB106 Manual Call Point, Designed for Fire Alarm Systems and Security Alarm system.
Key Specifications/Special Features
Available for flush or surface mounting
Plastic film on glass
Test key inserted from side
Open circuit with series resistor
Suitable for the majority of conventional fire alarm systems
1.Six overlapping detection region of the same height of human body.
2.With LED alarm light on columns displaying the accurate position of the targets.
3.Four corresponding infrared transmitters and receivers,no blind area.
4.Sensitivity of every area can be adjusted independently from 0-99,without the interference of scheduled metals.
5.Microprocessor digital control technology,strong anti interference ability.
6.The function of statistics:the number of passengers and alarms can be count.
7.It can be used independently or work together with the same mod(minimum spacing can be up to 40cm),to meet the requirements of the personnel large flow.
8.Password protection function:only the authorized person can operate it.
9.No harm to people, film and magnetic recording materials.
10.Installed conveniently:just put self-made four corner screws fixed door,plug in 220V power supply can be put into use
1.Highly sensitivity.
2.Simple and convenient to use, no adjustment is required.
3.The detection distance will not be changed when the battery voltage drops from 9V to about 7V.
4.Low power consumption, can work for 40 hours continuously.
5.There is automatic and continues alarm when the battery is used up.
6.Switch on/off audio prompt function.
7.With external rechargeable socket hole.
8.Has audio, Light and vibration hand off switch.
Model: RTU5025
Name: GSM 3G Gate Opener Access Control
The GSM 3G Gate Opener is special for authorized door access, and require turning ON/OFF your equipments remotely with a FREE call from your mobile phone and protect your assets. It supports to open the gate at the specified time. Also, the historical data can be read out via USB port.
The RTU5025 supports GPRS communication function, very suitable for remotely monitoring outdoor cabinets and stations of telecom company, traffic origination, power supply company and so on. It can be authorized different repair person or maintains person to open the cabinets or stations at the specified time, saving time to get the keys for the locks and saving cost to repair or replace the locks while the person lost the key. And also can remote monitoring the door is opened or closed, or illegal opened.
1. Quad-band, 3G WCDMA, 3G CDMA, can work in the worldwide GSM and 3G Networks;
2. No call charges. the GPRS-3G Gate Opener rejects the call from authorized number then carries out the turn ON/OFF action on the first 'ring';
3. Multiple applications. (gates, bollards, barriers, garage doors, shutters and access doors or machines);
4. Add or remove users by SMS Text command or over GPRS Network or USB Port;
5. No need to provide a remote control or keys for different users;
6. Up to 999 authorized phone numbers can be configured at the specified time;
7. Remotely upload the historical data or via USB port, the record capacity is 10000events;
8. 1 Digital inputs for motion sensors or other sensors to protect your door and windows;
9. 1 input special for monitoring door status and automatically armed when door closed;
10. 1 output with relay rating 3A/240VAC for connecting the switch of the door or machines;
2220 Safety Security Equipment Suppliers
Short on time? Let Safety Security Equipment sellers contact you.
