Features:
M built-in membranes ceramic cartridge;
Cleanable filter cartridge, without recontamination;
Changes filtrated water and tap water flexible;
Installs easily, fits most standard faucet.
The water enters the meter from the inlet of the meter body and impacts the vane wheel at the tip of the vane blades to make it rotate. The water flows out from the outlet of the body. The rotation of the vane wheel (proportional to the velocity of water flow) is transmitted directly to the central gear in the vacuum-sealed register by the magnetic coupling. The sealed register totalizes and indicates the water volume passing through the meter.
Working condition
-Water temperature≤ 50º C (Hot water meter≤ 90º C)
-Water pressure≤ 1MPa (PN: 1.6MPa/16bar)
-Δ P≤ 0.1MPa
Accuracy
-From minimum flow-rate (qmin) inclusive, to transitional flow-rate (qt), exclusive: ± 5%
-From transitional flow-rate (qt) inclusive, to overload flow-rate (QS), exclusive: ± 2% (Hot water meter: ± 3%.
Features
1. Wet, dry, liquid sealed
2. For hot or cold water
3. Small, light
4. Brass body or plastic body, optional
5. Brass body can be painted or nickel coated
6. High accuracy
7. The meters conform to ISO4064 Standard Class B or Class C.
Use ultrasonic flow measurement technology, no mechanical moving parts drift diameter design, no pressure loss, cut down the electric consumption of the pump and help untilities reduce cost.
Features:
Low in initial flowrate, and the min. Flow velocity measured is0.002 m/s;
Measurement cycle 1 time per second, battery powered (One battery can work
continuously for 6 years);
Multi-channel construction design, double cross section measurement, and be able
to ensure the measurement accuracy to the largest extent;
Be able to work at any flow point for long time;
IP68 of the whole meter, for each unit of the meter is IP68 designed;
Micro-consumption design, less than 0.0008W;
Drift diameter design, no pressure loss.
Operating on velocity-difference principle, the LG-UWM68 series is specially designed for urban water supply and building-use. The conventional water meters suffer from the drawbacks that they are only operable at a higher flowrate and are insensitive to a small flowrate. However, the LG-UWM68 series water meter can help tackle the bottleneck. And the meter is highly adaptable to diversified industrial conditions
Due to the use of ultrasonic flow measurement technology, it has no mechanical moving parts drift diameter design, no pressure loss, cut down the electric consumption of the pump and help the enterprises reduce cost
Be able to work at any flow point for a long time and high in reliability, immune to magnetic interference
Battery-powered capable of operating continuously for a period of over 6 years with a single cell
High sensitive to minimal flowrate and high in measuring accuracy
Capable of performing various output function, and it is capable of making wireless transmission of meter reading to form a monitoring system via the GSM network to monitoring the meter's running status and the pipe network conditions.
Three design versions are available, i. e. The ordinary version, 2-way version and fire water version are cater to different needs of users
Ordinary version: Measurements of the flowrate and cumulative running time in positive direction
2-way version: Capable of measuring flowrate, cumulative flowrate cumulative running time in positive/reverse direction;
Fire water version: Much bigger range ratio, and specially designed for fire water.
CE: 2004/108/EC
The meter is in conformity with Standard on Measurement of Water Flow in Fully Charged Closed Conduits_Meters for Cold Potable Water and Hot Water GB/T 778-2007-a standard is issued by the People's Republic of China
L Ex-factory calibration of the meter is made in conformity with Standard on Water Meter for Potable Cold Meter JJG162-2009- a standard is issued by the People's Republic of China.
Profile
A certain amount of water as defined by meter body passing through makes piston move. The measuring structure records its movements. Movements times defined amount making total amount of water passed registered.
Features
1. Rotary piston structure. It registers total amount of water passed in the tube by calculating how many times the piston rotates.
2. Dry and wet type are both separated from water so as to keep the registering clear.
3. Registering is stable and high-graded measurement. Easy to install.
4. Long endurance with no rotating inclination and long work life.
5. Various types available to register pure water or to be installed in any position.
6. Remote transmission device can be added upon request.
7. Different structures and specifications with beautiful appearances are available.
8. Meter bodies can be of copper, SS or plastic.
9. All technical figures are conformed with GB/T778.1~3-1996 which is equivalent to IS04064 Standard Class C.
Working condition
L Water temperature≤ 45º C
L Water pressure≤ 1Mpa (≤ 0.6Mpa for LXH-8S).
Maximum permissible error
L From the minimum flow-rate (qmin ) inclusive to the lower zone of the transitional flow-rate (qt ) exclusive: ± 5%.
ABS waterfall basin faucet with led temperature control light
1, Water saving
2, CE and ROHS
3, No need battery
4, Competive price
1,The product buit-in device for mini generating electricity,illuminated by water without battery,the light will go out when the water was turned off.
2.The illuminated colour will change according to the water temperiture.
1).When water flows down, the LED will light instantly an automatically;
When water temperature is ¡Ü32¡ãC,Green color will show automatically ;
2). When water temperature is between 33¡ãC-41¡ãC,Blue color will show automatically;
3). When water temperature is between 42¡ãC-45¡ãC,Red color will show automatically;
4). When water temperature is above 46¡ãC,Red color will flash immediately.
5). Two Universal adaptors (included) fits most water faucets.
QTY:40pcs
Weight:0.3kg (net weight of LED shower)
Weight:0.53kg (with stainless steel hose and holder)
N.W/ G.W:12.5/13.5KGS
MEAS:510x420x520mm
20-inch cabinets: 8730PCS
40-inch cabinets:17790PCS.
Name: fan-wheel liquid-sealed anti-reverse water meter for cold water
Category: plastic shell water meter->
Model number: lxsy-15/z-20/z
Specification: 15-20
Content: meter design
1. High quality materials(frpa), corrosion resistance.
2. The measuring mechanism can be exchanged.
Special features
1. Overload flowrate:qs=2qp(qn=nominal flowrate)
2. Digital-wheel and register are sealed with special with special liquid
3. Clearly reading for a long time
4. Steady and reliable performance
5. Measuring accuracy is up to iso 4064b
6. Anti-reverse water meter, it can be calculated normally when installation is reverse direction of flow.
Working condition
Water temperaturef_300c
Working pressuref_1mpa
Feature curve diagram:
Reading error:between qs. Flowrate and qt flowrate
Max.Reading errorf+2%
Between qt flowrate(not including qt):max.Reading errorf+5%
Anti-reverse, it can be read nomally and the reading error qp is positive value when meter installed reversedly.
YJ-120 series Mechanical Flow meter is used for fuel transferring application, diesel fuel, kerosene ect.These flow meters are reliable, inexpensive, and easy to install and simple to calibrate on the workplace.lt has the advantage of easy reading, quick resetting, and knob, flexible flow ports can be positioned vertically or horizontally. The easy reset register indicates product use up to 999/999.9.The master totalizer registers up to 999999/9999, 9999.Aluminium metering chamber, thread connection. Mechanical readout device with rotating wheels.
Digital oil flowmeter suitable for the lubrication oil flow meter guns and suitable for metering the engine oil,motor oil,freeze oil,hydraulic oil and all kinds of lubrication oil...
YJ-120 series Mechanical Flow meter is used for fuel transferring application, diesel fuel, kerosene ect.These flow meters are reliable, inexpensive, and easy to install and simple to calibrate on the workplace.lt has the advantage of easy reading, quick resetting, and knob, flexible flow ports can be positioned vertically or horizontally. The easy reset register indicates product use up to 999/999.9.The master totalizer registers up to 999999/9999, 9999.Aluminium metering chamber, thread connection. Mechanical readout device with rotating wheels.
Digital oil flowmeter suitable for the lubrication oil flow meter guns and suitable for metering the engine oil,motor oil,freeze oil,hydraulic oil and all kinds of lubrication oil...
Apply to engine oil, gear oil, automatic gear-box oil, hydraulic oil, antifreeze and similar products of precision filling;
Filling the total memory, a single volume displays filling function;
5 easy to read LCD display, a 3V battery-powered; Automatic power-saving mode.
Real-time error coefficient of calibration, easy to operate;
Multi-unit selection
With anti-drip function, anti-drip muzzle
Rotary Joints 1 / 2 "easy to use, anti-collision switch design.
Interchangeable probes
Water Quality Meter - 850081
Using interchangeable, plug and play probes, this versatile meter reads pH, mV, ORP, conductivity, salinity, TDS, DO and temperature. Order probes only for parameters currently required, and add additional probes in the future. The back-lit display simultaneously reads temperature in user selectable °C & °F. All measurements are automatically temperature compensated and DO measurements can be compensated for salinity and altitude as well. Automatic calibration recognition of pH buffers 4, 7 and 10. Also features auto power off, hold, min/max, fold-out easel back and a tripod screw. Comes with 9V battery and hard-shell, foam-lined carrying case with room for one or two probes. PROBES NOT INCLUDED. EPA Equivalency Method: 360.1 and Alpha Method 2580.1992.
Dim: 7" x 2¾" x 2" (177 x 68 x 45 mm).
Weight: 16 oz (489 g).
Water Quality Meter pH Kit - 850086
Includes everything needed for immediate field use as a pH meter: Water Quality Meter 850081, pH Probe 840016; ATC Temperature Probe 840038; instructions, pH buffers 4, 7 & 10, deionized water; and a 9V battery. All of these are contained in a hard-shell, foam-lined carrying case. EPA Equivalency Method: 360.1 and Alpha Method 2580.1992.
MF5700 Series Protable Gas Flow Meters General description
MF5700 series mass flow meters feature cost effective ultra low power operating on 4 AAbatteries. The portable design has excellent exchangeable mechanical adaptors, easy dataaccessible and user programmable capabilities. The internal data storage can also help forpurpose flow applications.
MF5700 Series Protable Gas Flow Meters Features and Applications
- Ultra low power by batteries or optional external AC adaptor
- Potable design with rotatable meter head and easy exchangeable mechanical adaptors
- Customizable flow range with over 30:1 turn-down
- Rs485 Modbus protocol ready for networking
- User programmable range alarm for safety and other monitoring/control functionality
- Internal data storage for additional data safety
- Hygienic and oxygen safe copper body for various fluids
MF5700 Series Protable Gas Flow Meters Applications
Mechanics
Food
Tobacco
Chemistry
Beverage
Glass
Agriculture
Research
Pharmaceutics
Instrumentation
Model: S251
Name: GSM GPRS 3G 4G Power Distribution Monitoring System
Keyword:
GSM GPRS 3G 4G Power Distribution Monitoring Systems, GSM GPRS 3G 4G power quality monitoring, GSM GPRS 3G 4G Power transmission line monitoring system , GSM 3G Transmission Line Security Monitor, GSM 3G energy monitoring system, GSM 3G Transformer Monitoring, GSM 3G Transformer Oil Monitoringâ??, GSM 3G Transformer Oil Health Monitoring, GSM 3G Transformer oil moisture monitoring, GSM 3G transformer oil level monitoring, gsm 3g Transformer Fire alarm, gsm 3g Remote online transformer monitoring. GSM 3G Power distribution safety monitoring system.
The GSM GPRS 3G 4G Power Distribution Monitoring System is not only a smart power meter for measuring the power distributor voltage, current, factor, watts, frequency, active power, reactive power, when over current or exceed the pre-set value, will alarm immediately.
The GSM GPRS 3G 4G Power Distribution Monitoring System can be used for monitoring the oil temperature, oil level of the transformers. GSM 3G Wireless Power Line monitoring.
The GSM GPRS 3G 4G Power Distribution Monitoring System also can be used as a wireless security alarm system for the transformers, e.g.: theft-proof, fall down, and so on.
Model Description
S250 GSM GPRS Power Cable Anti-Theft Alarm System
S251 GSM 3G Power Distribution Monitoring System
Mainly Features:
1.ARM® Cortex�-M4 32 Bit RISC Core, 72MHz inside, RTOS system;
2.Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication;
3.Programmable by SMS Commands or PC Configurator via USB;
4.A/B/C phase power up it directly, Inbuilt large capacity rechargeable backup battery;
5.Suitable for three-phase four-wire system, input voltage: 100~400V, input current:0~5A;
6.Monitoring A/B/C 3 Phase input over current, over voltage , factor, watts, active power, reactive power exceeds alarm;
7.Power input PT,CT rate are programmable;
8.Accuracy of current, voltage is 0.2 class, power and watts is 0.5 class, sampling is 0.1seond.
9.Large internal memory can save 1000 event historical data;
10.6 analog inputs, 16bits, supports 0-5V, 0-20mA, 4-20mA;
11.2 digital outputs, 5A/30VDC,5A/250VAC, can be program to events or turn on/off by SMS;
12.8 digital inputs, NC/NO/EOL type, when digital input recover can alert by SMS;
13.I/O ports with opto-isolated and lightning protection;
14.Provide one 5VDC@1A power for additional device;
15.Equips LCD to display the real time data and for programming;
16.2 IP data centers, supports GDW 376.1â??2009 protocol over GPRS/3G network;
17.1 RS485 can be used as data transparent transmission for additional intelligent meters or PLC, with 15KV ESD protection;
18.Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
19.8 SMS Alert and auto dial numbers, can program to receive specified alarm message.
20.Automatically report its status to users by the specified time.
