* 3.5 inch touch screen, HVGA PX:320*480
* 512MB ROM 256MB RAM, support to extend TF card to 32GB maximally
* Dual cameras:
- 2.0 Mega pixel camera for picture&video capability, put out biggest size is 1600*1200
- Sub camera(640*480)
* U disk support function to keep the information storage
* FM radio
* Caller picture,caller ring tone,caller video.
specification:
* Quad-band network connection: GSM850,900/1800/1900 MHz(GPRS).
* Display:
- 1.5 inch 260k color TFT touch screen
- Flat design, flat-screen touch handwriting function
* Supports TF memory card(1GB-2GB)
* Hidden video recording design with 1.3 Mega pixels.
* supports FM radio connected to the headset to switch to the putting-in support of FM radio to connect to switch to a mono bluetooth headphones to listen to radio
* Hidden camera design, 1.3Mpixels camera
* supports network camera, support for WAP access
* support for MP3 playback, support for bluetooth mono listening to MP3 player
* Supports for 128x128 pixels 3GP/MPEG4 format video playback
* Supports taking pictures, viedo record and sound record.
* supports four types of calling patterns: normal/hands-free/wired headset/Bluetooth headset, call mode
* High-polymer battery 850mAh Li-ion battery
* supported languages: English, French, Spanish, Italian, German, Indonesian, Russian, Arabic, Traditional Chinese, Simplified Chinese.
Outdoor DIP module/full screen
p10 pixel:1r1g1b module size:320*160mm
p12 pixel:2r1g1b module size:192*96mm
p14 pixel:2r1g1b module size:224*112mm
P16 pixel:2r1g1b module size:256*128mm
p20 pixel:2r1g1b module size:320*160mm
p25 pixel:2r1g1b module size:200*200mm
p31.25 pixel:4r2g2b module size:250*250mm
p40 pixel:1r1g1b which is used IN BAR &STAGE backlighting
Both indoor and outdoor SMD 3IN1LED DISPLAY:
P10mm 1R1G1B 160mm x 160mm
P12mm 1R1G1B 192mm x 192mm
P16mm 1R1G1B 256mm x 128mm
P20mm 1R1G1B 320mm x 160mm
Outdoor led curtain(DIP 1R1G1B led type or SMD 3IN1 type, Stripe shapes,light weight,specially design for stage background or lighting,
P16mm 1R1G1B 768mm x 768mm x 80mm
P18mm 1R1G1B 576mm x 576mm x 80mm
P20mm 1R1G1B 640mm x 640mm x 80mm
P25mm 1R1G1B 600mm x 600mm x 80mm
P31.25mm 1R1G1B 750mm x 750mm x 80mm
P37.5mm 1R1G1B 900mm x 900mm x 80mm
Features:
1) Relatively low cost and High quality
2) Relatively stable capability II.Function and Technology Character
(1) Multiplied file formats, such as AVI, MOV, MPG, DAT, VOB are comprehensive, and also three display mode as VGA+VIDE and VGA. ,interfaces for Sound signal and vedio signal.
(2) 4096 grade grey control system and the color is over 16.7 millions, and the brightness, contrast,saturation,chroma can be adjusted by manual and sensor, whose scope is 256 grade.
(3) Show all kinds of word, text, graph, picture, vedio, 2-dimention, 3-dimention cartoon and other information with your PC does synchronously.
(4) Line-Double technology is adopted for the picture adjustment.
(5) Can be connected with PC and the webnet and show the content, and also can be controlled remotely via VPM+ADSL.
(6) Can be used outdoor in all kinds of weather, and excellent capability of antisepsis,waterproof lead time:around 20 days.
LED chip: epistar LED chip
Pitch:16mm
Pixel/m2:3, 906 dots
Brightness (stand led):>7, 500nits
Maximum power consumption: 650w/sqm,
Viewing angle :120 degree/ 50 degree
Refresh rate:> 480 hz
Mtbf:>10, 000 hours
Grey scale/color:display> 16.7m color (synchronized)
Water proof (front/back):ip 65
Scan method:static state same current
Operating humidity:0- 95%
Input voltage:ac220v/50hz or ac110v/60tz
Input frequency:"50/60hz
Best viewing distance:16m.
Two cabinets per export wooden box
Packing dimension :120cm ¡¨¢ 52cm ¡¨¢ 96cm = (0.6m3/box)
Gross weight : 99kg/box.
Utstarcom gf210 gsm/wifi dualmode phone with gprs class 10 supported
Aside from the gsm and wifi dual-mode, the mobile phone only brings a set of basic features including a 1.8 inch 65k color display, text messaging, polyphonic ringtones, call forwarding, call waiting /hold /barring /conferencing, mms support, built-in games, a wap browser, alarm clock, organizer, notes, calculator, measure converter, world time and stop watch, so basically, everything a basic user can’t do without when considering to purchase a mobile phone.
Utstarcom gf210 additional features
• dual mode gsm/wifi dual mode phone
• gsm
O supports gsm triband networks
O 900/1800/1900 mhz
O limited support for 850 mhz
O voice codec: hr, fr, efr
O gprs class 10 supported
O wap 2.0*
O mms 1.2*
• wifi
O supports 2.4 ghz 802.11b
O auto scan/manual network selection
O effective range: up to 70m indoor, up to 120m outdoor
O protocols:
Sip, rtp/rtcp
Dhcp/static ip, stun, dns
Sip server failover
O voice process
Codec g.711a/’
Comfort noise generation
Voice activity detection
Adaptive jitter buffer
Echo cancellation
Inband/rfc2833 for dtmf
O security
Wpa-psk/wep (64/128 bit)
Supports 802.1x-md5/wpa2
O supports sip-message over wifi
O local/remote tftp/http firmware upgrade and provisioning
Utstarcom gf210 features
• display: 1.8’ 65k color cstn (128 x 160)
• call forwarding*
• call waiting/hold/barring/conference*
• ezi predictive text
• pim manager via syncml
• multilingual: english, chinese, german, spanish, french
• phonebook with 500 entries
• 40 polyphonic ringtones
• size: (h) 107 x (w) 45 x (d) 20 mm
• weight: 95 grams.
Packed in box of each piece, 10 boxes to a carton.
Carton size:35*32*22.5cm
G.W.:5.5kgs
N.W.:4.6kgs.
Description:
WLAN-2300-1W is an indoor solution 1W bi-direction Booster designed for 2.4GHz wireless LANs. This unit comes with an easy plug-and-play installation, which works together with an indoor Wireless Access Point to improve its operation range and performance. In certain conditions the unit is able to double the range of the wireless device. The unit extends signal range and can eliminate the use of an additional radio with its associated data line, power outlet, signal interference, and setup headaches.
The unit is the fast and easy way to extend your signal range in any environment. The unit is ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 11 mbps IEEE802.11b devices.
The amplifiers increase range by providing transmit gain as well as low-noise receive gain. This receive gain increase the receive sensitivity of wireless LAN Access poing. Full output power of 500mW is achieved with only 32 mW input into the Booster.
Specifications:
Operating range : 2400-2500MHz
Operating mode : Bi-directional, half-duplex Time Division Duplex Senses RF carrier from Transmitter and automatically switches receive to transmit mode
Connector Type: SMA Receptacle (50 ohm)
Transmit gain : 15dB (Adjustable)
Input Trigger Power: 5~20 dBm
Optimal Input Power: 9~13 dBm
Receiver Gain: <12 dBm
Noise Figure: 3.5dB typical
Frequency Response: ¡À 1dB over operating range
Power Adaptor: 5~7V /DC 105~240V for AC Adapter
Operating Temperature: -20 to 70 ¡ãC
Operating Humidity: Up to 95% relative humidity
Material: Cast Aluminum
Package Weight: 560g.
Designed for extending the range of 2.4GHz wireless radio devices, the booster amplifier is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems . The unit provides the transmit power gain as well as receive signal gain.
Proprietary in-house MMIC design allows sensing of input power level and protects itself against over power or reverse power operating conditions.
Feature:
• Strengthen radio signal to Increase the effective range and coverage area for Wi-Fi communication
Save wiring costs, easily build a wireless infrastructure for home or business use
Make broadband wireless application in possible coverage
No software required, easy to install
Specification
Frequency Range 2.4GHz
P1dB 33dBm
Linear Pout 26dBm (@5.5%EVM) , 64QAM
Tx Mode Turn on Power > 2dBm
Tx Gain 13~17dBm
Rx Gain 8~12dBm
Turn on Power > 2dBm
Tx Gain 13~17dBm
Rx Gain 8~12dBm
Rx Noise Figure 3.0dB
VSWR, input/output < 2
DC supply 9~12V
Operating temperature -40~+70 oC .
Hd-m
Product name led double-zone control controller asynchronously
The rang of control
Single color 64 * 640 ¡¢ 48 * 832 ¡¢ 32 * 1280
Double color 64 * 320¡¢ 48 * 416 ¡¢ 32 * 640.
The basic parameter
Divided into 3 district discretionarily
Supporting most moudles, 1/16, 1/8, 4/4, 4 /2 and static scan, etc.
Supporting 20 series water border
Supporting 30display effects.24 series clear-screen effect
Supporting 10 lever brightness settings.3 brightness adjustment mode
Supporting 1 group turn on /off timely.
Hd-u
Product type led multi-zone control card asynchronously
(including usb interface)
Range of controled
Single color 128 * 1024 64 * 2048
Double color 128 * 512 64 * 1024
The basic parameter
Supporting usb interface
Divided into 5 districts discretionarily
Supporting 20 series water border
Supporting 30 series display effects.24 series clear-screen effects
Supporting 10 levels brightness settings, 3 brightness adjustment modes
Supporting1 group turn on /off timely.
Product type led multi-zone control card asynchronously
(including usb interface)
Range of controled
Single color 256*512 128*1024 64*204 32*2048
Dual color 256*256 128*512 64*1024 32*2048
The basic parameter
Supporting usb interface
Divided into 5 districts discretionarily
Supporting 20 series water border
Supporting 30 series display effects.24 series clear-screen effects
Supporting 10 levels brightness settings.3 brightness adjustment modes
Supporting1 group turn on /off timely.
Hd-n
Product type led multi-zone control card asynchronously
(including usb interface)
Range of controled
Singel color 128*512¡¢ 64*1024 ¡¢32*2048
Double color 128*256¡¢ 64*512¡¢ 32*1024
The basic parameter
Supporting usb interface
Divided into 5 districts discretionarily
Supporting 20 series water border
Supporting 30 series display effects.24 series clear-screen effects
Supporting 10 levels brightness settings.3 brightness adjustment modes
Supporting1 group turn on /off timely.
HD-E
Product type LED multi-zone control card asynchronously
(100m internet interface)
Range of controled
singel color 128*512 64*1024 32*2048
double color 128*256 64*512 32*1024
The basic parameter
supporting USB interface
divided into 5 districts discretionarily
supporting 20 series water border
supporting 30 series display effects.24 series clear-screen effects
supporting 10 levels brightness settings.3 brightness adjustment modes
supporting1 group turn on /off timely.
FC adapter metal housing and either a precision zirconia or a rugged phosphor bronze sleeves.
Zirconia sleeve enables stable connection and thus enhances performance, and is ideal for single mode applications. Phosphor bronze sleeve provides durability, and is ideal for multimode applications. Square flange mount and "D" hole mount styles are available.
Features :
Low insertion loss
Good exchangeability and repeatability
Zirconia or phosphor-bronze sleeve
Simplex or duplex
Flange mount style
Applications:
Telecommunication
Computer networks
CATV networks
Active device termination
Instrumentation
1 U Fiber optic patch panel
Rack mounted 24 ports
Instal SC,FC,ST and LC adaptor
intensified & insulated material
Features:
The shell is high intensified & insulated material, thus having excellent mechanic performance
It is solid and durable
Fiber input:4
Adapters output:24 cores
Strength core and shell was insulation, add with grounding lead
Suitable for inserting installation of SC,FC,ST and LC adaptor
Full accessories for convenient operations
ò GSM Quad band: 850/900/1800/1900MHz ò WLAN 802.11b auto roaming support
ò Integrated VoIP over WLAN using SIP protocol on IMS system
ò Supporting active call handover between GSM and WLAN network
ò Form factor û Candy Bar : 112mm x 50mm x 12.5mm
ò Talk time û 3 hours (GSM); Standby û120 hours
ò 2.2ö QVGA 262K color TFT LCD 256K.
Hy-2613a is one series of wireless calling systems. The basic function is when press the button on the requester, the number will display on the host screen.
Hy-2613a is wireless receiver, the host of hy-2613a system. It used for reciving and displaying the numbers that transmit by requesters.
Weight:1.8kg
Dimensions:810*320*150(mm)
28050 Communication Suppliers
Short on time? Let Communication sellers contact you.
