1. Standard: CCS, DNV, GL, ABS, LR, BV, etc
2. Grade: A,B,C,D,E(Z15,Z25,Z35) AH32-FH32,AH36-FH36, API SPEC 2H Gr42,Gr50,A514,GrF/Q
Thickness: 6mm-650mm
Width: 1500mm-4020mm
Length: 3000mm-18800mm
The maximum single weight can be 27.5 tons.
Also we can produce even bigger standard steel plates as customer requirement.
High manganese steel x120mn12 mn13 1.3401
1.Standard: en, gb, astm, din
Mn13(x120mn12)wroughtsteel plate have wonderful abrasion resistance of high impact abrasion
And big stress abrasion, when using it will not appear crash.It also has the excellence of easy for
Cutting , welding , curving and other mechanical properties for process.The traditional used high
Chrome forging only have the good wear-resistance of moving abrasion.
Mn13(x120mn12 rolled plate is reduced the cost of useing for quick wear part of low equipment
And save the overhaul fee of equipment, so it improves the competition.
1. Standard: gb, astm, jis, din
American standard: us a128
Europe standard: x120mn12
Jis:scmnh11
China standard:mn13
Zgmn13 china cast steel
High manganese steel
2. Brand name: chongqing special steel, tisco or baosteel
3. Specification: tk3-200mm, width: 500-3000mm, length: 1000-12000mm
4. Chemical composition (%)
C
Si
Mn
P
S
Cr
1.1~1.3
0.3~0.5
12.0~13.0
¡¨¹0.100
¡y0.040
(1.50)
5. Mechanical properties
Tensile
Strength
Rm(mqa)
Yield strength
Re(mpa)
Reduction
Of area a(%)
Ballistic work
Akv(j)
880~1130
¡y410
¡y40
We are one of the largest ten steel exporter and importer in china.We supply different kinds of hot/cold rolled steel plate as follows:
Steel garde: q235b/ss400/a36/dc01/dc02/dc03/dc04/dc05/dc06/spcc/sphc/sgh-340/saph440/st12
Baosteel Released Carbon Steel Flats Futures Price Policy for September
On August 10, Baosteel released carbon steel flats futures price policy for September based on price policy for August 2020. (Following prices exclude VAT unless specified)
I Heavy Plate (Baoshan base, Dongshan base)
Base price of carbon steel heavy plate: up 200 yuan/t;
II Section Steel (Qingshan Base)
Base price of steel sheet piling: up 260 yuan/t; guard rail: up 200 yuan/t;
The rest is unchanged.
III HRC (Baoshan base, Qingshan base, Dongshan base and Meishan base):
Base price: up 200 yuan/t;
IV Pickled coil (Baoshan base, Qingshan base, Dongshan base and Meishan base):
Base price for plain carbon and non-automotive steel products: up 260 yuan/t;
Base price for automotive steel products: up 100 yuan/t;
V Plain Carbon CR steel (Baoshan base, Qingshan base, Dongshan base and Meishan base)
Product name: astm duplex 2b ba no.4 stainless steel plate
Grade: 2205 2507 etc
Chemical composition: c, si, mn, p, s etc.
Standard: aisi
Payment: t/t.30% deposit and the balance against the copy of b/l.
Application: household appliance
Type: plate
Surface: 2b/ba/2d/no.1/no.4, ect.
Product name: factory supply inox stainless steel plate
Grade: 300 series
Chemical composition: c, si, mn, p, s etc.
Standard: aisi
Payment: t/t.30% deposit and the balance against the copy of b/l.
Application: household appliance
Type: plate
Surface: 2b/ba/2d/no.1/no.4, ect.
Product name: astm standard stainless steel tread plate
Grade: 300 series
Chemical composition: c, si, mn, p, s etc.
Standard: aisi
Payment: t/t.30% deposit and the balance against the copy of b/l.
Application: household appliance
Type: plate
Surface: 2b/ba/2d/no.1/no.4, ect.
Product name: 201 stainless steel plate
Grade: 200 series
Chemical composition: c, si, mn, p, s etc.
Standard: aisi
Payment: t/t.30% deposit and the balance against the copy of b/l.
Application: household appliance
Type: plate
Surface: 2b/ba/2d/no.1/no.4, ect.
Product name
stainless steel plate
Grade
(200 series& 300 series& 400 series..etc)
201,202,301,303,304,304L,305,316,316L,321,410,416,420,430...
1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597,1.4541, etc
Standard
GB, JIS, ASTM, AISI
Surface
pickled,bright or black
Thickness
sheets:4mm,range from 4-60mm or above.
Width
10mm-3000mm
Length
AS PER CUSTOMER
Usage
1.Widely used in the areas such as stainless steel fasteners,chains.kitchen and sanitarywares,furniture handles,handrail,electroplating and electrolyzing pendants,food,electro,petroleum,construction and decoration,etc.
2.electronic products parts,medical appliances,springs,bus inside and outside packing and building,street lamp posts,etc.decoration materials and outdoor publicity billboard.used for the products which have the anti-stress corrosion requirement.electron products,table-wares,bolts,nuts,screen mesh, combustor and so on.
Surface finish
NO.1
Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks
and chem i cal devices.
NO.2D
Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used
as auto mo bile parts, build ing materrials and pipings.
NO.2B
The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surface
treament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses.
NO.3
Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse
stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen
uten sils etc.
NO.4
Polished with abrasive belt of grit #150-#180, have better brightness with discontinuous coarse stria,
but thinner than NO.3, are used as bathtud building inner and external ornaments electrical appliances,
kitchen utensils and food processing equipment etc.
#320
Polished with abrasive belt of grit #320, have better brightness with discontinuous coarse stria,
but thinner NO.3, are used as bathtub building inner and external ornaments electrical appliances,
kitchen utensils and food lprocessing equipment etc.
HL
Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks,
mainly used as building ornaments, elevators, door of building, frontal plate etc.
BA
Cold rolled, bright an nealed and skin-passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror,
used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc.
Product name
Stainless steel plate
Grade
(200 series& 300 series& 400 series..Etc)
201, 202, 301, 303, 304, 304l, 305, 316, 316l, 321, 410, 416, 420, 430...
1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597, 1.4541, etc
Standard
Gb, jis, astm, aisi
Surface
Pickled, bright or black
Thickness
Sheets:4mm, range from 4-60mm or above.
Width
10mm-3000mm
Length
As per customer
Usage
1.Widely used in the areas such as stainless steel fasteners, chains.Kitchen and sanitarywares, furniture handles, handrail, electroplating and electrolyzing pendants, food, electro, petroleum, construction anddecoration, etc.
2.Electronic products parts, medical appliances, springs, bus inside and outside packing and building, street lamp posts, etc.Decoration materials and outdoor publicity billboard.Used for the products which have the anti-stress corrosion requirement.Electron products, table-wares, bolts, nuts, screen mesh, combustor and so on.
Condition of delivery
Austenite in solution, ferrite in anneal or in accordance with client's detailed requirement
Moq
1 metric ton
Price terms
Cif or fob shanghai
Payment terms
L/c or t/t
Supply ability25 metric tons per day
Delivery detail7-30 days, according to the quantity.
Packaging detail full wrap by plastic packing-cloth
118 Steel Plates Suppliers
Short on time? Let Steel Plates sellers contact you.
