We supply fuel additive :
Vanadium inhibitor,
Two grades,
For gas turbine
Packing: 250 kg net in steel drum
Quantity: 3000mt per month
Please contact us for details if you need.
Best regards.
We are in strong position to supply :
Tbn booster,
Tbn 400,
Calcium sulphonate
Top quality,
Loading from china by sea. For more details, please contact us.
Best regards.
We are in strong position to supply :
Barium petroleum sulphonate
Grades: 45% and 55% of purity.
Loading from china by sea.
For more details, please contact us.
Best regards.
MS2000 is an adhesive and sealant based on MS-polymers to provide a two –part, fast curing product. It has an outstanding bonding strength and prime less adhesion on various types of substrates.
ADVANTAGES:
Eco-friendly, Green, Healthy
High efficiency, suitable for large-scale construction
Less than 5% of the waste, saving costs
Excellent weather resistance
Outstanding Surface compatibility with paint systems
No pollution to the substrate
Excellent adhesion
No pollution to the substrate
Low modulus, high elongation, suitable for large displacement seams
APPLICATION:
Joint sealing for PCA board
Joint sealing for metal wall hanging
Joint sealing for concrete products
Sealing Around the window frames.
NOTICE:
Not applied to GLASS
After the two-component mixing the gel time of 3 hours, the need for construction at this time
Must comply with the primer, otherwise no adhesion
TEST RESULT:
Item Results
GB/T22083-2008 F-25LM
Elastic recovery% 90
Tensile Modulus 23 0.2
- 20 0.3
Tensile properties NO DEMAGE
Adhesion/cohesion properties at variable temperatures NO DEMAGE
Adhesion/cohesion properties at constant temperature NO DEMAGE
Extension after immersion in water NO DEMAGE
Volume Loss(%) 2
Liquidity/MM 0
SPECIFICATION:
Properties Parameter
Appearance White paste, all colors
Ratio=main agent: harder: color paste 100:10:5
Shelf life(under 25) 6 months
Density(g/cm3) 1.1
Operation time 5 5
23 2/4/6
35 2( summer
Package 4L
1.Excellent dielectric property
2.Excellent water and oxidative resistant performance
3.Operating temperature range (-50C to 27;C)
4.Adhere well to metal, ceramic, rubber and other isolation materials
5.Excellent corona resistance
6.Non-poisonous and low volatile
PROPERTY STANDARD VALUE
Color Visual inspection Transparent/Light grey
Density 25C, g/cm3 1.0
Penetration (Static) mm/10 250
Penetration (Dynamic) mm/10 350 Max
Oil Bleed 24hours, 27;C 12% Max
Volatility 24hours, 27;C 2% Max
Volume resistance 27;C, ohm-cm61;¨¢1012
Dielectric constant MHz 2.9
Power factor 100Hz -10MHz 0.0025
dielectric strength
;Key Features
.Two-part : mixture addition type silicone adhesive
2.Low hardening shrinkage
3.Excellent electrical insulation in high temperature and stability
4.Good waterproof and moisture resistance
5.Excellent flame resistance, UL No: E34099
;Typical Applications
Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc.
;Technical Data Table
PROPERTY STANDARD/UNITS VALUE of SI2230
---- ---- PART A PART B
Color Visual inspection white / black viscous liquid white viscous liquid
Viscosity 27;C, cps 6;¨¤500 6;¨¤500
Density 27;C, g/cm3#6;¨¤0.05#6;¨¤0.05
Mixture ratio Mass ratio A:B=00:00
Viscosity of mixture 27;C, cps 6;¨¤500
Operation time 27;C, min 60¨¤0
Cure condition RTV/HEAT 27;C/ 4 hour;#7;C/ 30min
Cured appearance ---- White/ Gray-black elastomer
Hardness Shore A 56;¨¤5
Thermal conductivity W/mK 0.80
Linear expansion coefficient K-, ppm 300
Dielectric strength kV/mm, 27;C Y20
Volume resistance DC500V, ohm-cm .¨¢05
Loss factor MHz 0.009
Dielectric constant MHz 3.00
Application temperature C -60~200
It is used to clean the gun extrusion tube, adapter and other unwanted foam before cured. You might need this when using gun/ professional type PU foam (for straw/manual type PU foam, foam cleaner is not necessary). 2-year shelf life.
It is a one-part polyurethane product formulated by Gorcci International. It reacts with moisture in the air to form a kind of elastomer with high strength, aging, vibration, low and corrosive resistance properties. PU Sealant was widely used to join the front, back and side glass of the cars and also can keep a steady balance between the glass and the paint on the bottom. Normally we need to use a sealant guns to press out when it shaped in a line or in bead.
It is widely used in blending industrial lubricating oils such as those for internal combustion engine, hydraulic facilities, gear, bearing, slideway and metal working, etc. The recommended dosage in oil is 0.5-3.0%.
The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
This product is primarily used in blending marine oil and high quality internal combustion engine oil, especially the engine oil for high-sulfur fuel. It is brown liquid. The recommended dosage is 0.5-25.0%.
Characteristics
Strong acid neutralization capacity
Good oil solubility
Scatter glial and ash
Good anti-rust and anti-foam ability
Good thermal stability and hydrolytic stability
Excellent performance of water resistance and high-temperature detergency.
This gear oil additive package can be used in blending the following grads of API GL-5 vehicle gear oil: SAE90, 80W/90, 85W/90, 85W/140 and the following grads of industrial gear oil: N68, N100, N150, N220, N320, N460. It is brown transparent liquid.
Characteristics:
Be available for all kinds of base oils
The GL-5 80W/90 vehicle gear oils with the dosage of 4.5% G353 have passed the test of CRCL-42, CRCL-33, CRCL-37 and CRCL-60 etc.
The 320 heavy load industrial gear oils with the dosage of 1.6% G353 meet the standard of American steel USS-224.
This product is a compound of zinc-dithiophosphate, detergent, dispersant and antioxidant. It is primarily used in blending various low-grade and middle-grade lubricant oils. With very low dosage, it can meet the requirements of SB/CB and SC/CC grade oils. The product is brown liquid.
This product is primarily used for blending cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. The recommended dosage in oil is 2.0-4.0%.
The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
Is a one component polyurethane foam used to seal gaps and crevices. The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure. Pu foam is widely used in sealing around doors, windows, pipes, indoor fittings or any other application in construction. Provides an excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
USD650/T FOB shanghai.This is Heaven Zhu from Chemix Specialty Chemical Co.,ltd(C.S.C), in China.
We are promoting 98% Calcium Formate on construction grade.
It can achieve good adhesion effect, environmental taste , high strength adhesion, cold resistance, aging resistance, etc. Excellent performance and stable quality can provide the perfect adhesion scheme to various manufacturers. Belongs to green environmental protection paper filter core special adhesive. Softening point of 80 degrees or so, oil resistance, water resistance, resistance to high and low temperature alternating, weak acid, excellent aseismic performance and good stick relay, fundamentally solve the industry's long plagued a/filter degumming problem such as adhesive, plastic shrinkage, crack, is currently the most ideal paper filter adhesive. Room temperature curing, the process is simple, easy to use, can be manipulated manually, can also mechanical operation. Welcome to the skycarving website www.Tiandiao.Com.For consultation.
This series product is suitable for use in medical industry, the softening point of 80 degrees or so, wide range of uses, specific have infusion stick adhesive, base cloth, pressure sensitive adhesive products, such as white, yellow and black lump hot melt adhesive, to ensure product safety and health, no harm to human body, health, to ensure that the use of rest assured, with enjoyable. Hot melt adhesive is an environmental hot melt adhesive which meets the international fda standard and is not allergic to the skin. With the constant innovation of medical supplies, hot melt adhesive is more and more play its unique role, it has long been used in medical supplies material bonding, now it is a bigger role as the carrier of drug and skin nicely. Welcome to the skycarving website www.Tiandiao.Com.For consultation.
75 Lubricants Suppliers
Short on time? Let Lubricants sellers contact you.
