Textile dividers are an excellent choice to protect parts with a sensitive surface. This cost-effective solution allows a higher quantity of parts to be safely included in one packaging unit.
Textile dividers� are an excellent choice to protect parts with a sensitive surface. This cost-effective solution allows a higher quantity of parts to be safely included in one packaging unit.
Transport rack for center consoles� is ideally suited to be used in combination with injection molded boxes, made to measure corrugated boxes, plastic containers, steel trolleys, etc.
Racks and trains with� multi-material internal dividers� that are made to measure to protect and transport your products. These metal packaging solutions are robust, reusable and ideally suited to many different designs and applications.
Suspended bag with ecoboxes textile� is a kind of� PVC coated fabric� which DERFLEX is been producing for over 20 years. Following are some of the� Internal trolley textile� specifications we export to Suspended bag manufacturers:
item
value
unit
test method
Basic fabric
1000D*1000D
Denier
construction
20*20
Threads/Inch2
total weight
650
gsm
DIN53352
Breaking strength
L� ï¼?2300
N/5CM
DIN53354
Wï¼?2100
Tearing strength
Lï¼?350
N/5CM
DIN53356
Wï¼?300
Adhesion
80
N/5CM
DIN53357
Color Fastness
â?¥7-8
Grade
Applicable
-30â??70
â??
As one of the leading� PVC tarpaulin manufacturers� in China, DERFLEX has 2 knife coating, 4 calendaring, 8 lamination production lines, together with more than 500 workers, 10 technicians highly graduated. Customers and potential customers are welcomed to visit our factories for deeper discussion.
The textile dividers can be fit in any kind of handling unit, whether plastic or steel, small or large, standard or custom made. Our engineering team guarantees a perfect marriage of textile divider and handling unit.
Sublimation direct print fabric is a kind of textile for digital printing. It can absorb and fix water sublimation ink through special dyeing, qualitative and finishing processing, and transfer the ink from the one side to the other side of the fabric, thinner fabric Can achieve the same color effect on both sides of the material.
The principle of the� poster sublimation fabric� is to make low-energy easily sublimated disperse dyes into ink through the sublimation digital direct injection machine, inkjet in the special treatment of polyester fabric, by heating (180-210 degrees Celsius), you can in 5-20 seconds will be complex, Multi-color image inkjet to chemical fiber fabrics and other materials, and color fixation and direct production of finished inkjet cloth, suitable for increasing environmental requirements and rapid production needs.
Dyeing fastness of� sublimation direct� printing fabric� printing, water washing degree of 4.5 or more. Than the traditional way through the transfer of paper, with better picture and sharper edges; Environmental protection, do not need to use transfer paper, save resources, Reducing the impact on the environment; increasing ease of operation and avoiding errors caused by the movement, folding and twisting of the transfer paper.
shining century direct inkjet FR fabric� is able to display applications in public places, with water-based thermal sublimation direct injection of ink to ensure that the screen high gloss, colorful, digital textile printing machine can be directly sprayed polyester fabric.
The specialty
1.The FR standard could reach German DIN 4102 B1 , it is the best ads material for public place
The picture on it is more brilliant, and with good effect on it, you could use it for all kinds of situation.
3.Eco-friend material, with no pollutant discharge, and simple printing condition, you only need print directly by input the picture from the computer to finish your design and exploitation.
4.The material including warp & weft knitting fabric, weaving fabric, non-woven fabric, all kinds of these fabric could be dealt with FR and direct inkjet printing.
Main application of� digital sublimation printing fabricï¼?
Archival Photo Albums
Flag fabric white material is produced by DERFLEX with from 90gsm-220gsm, it can be printed as different flags such as: beach flag, country flag, teardrop flag or other banner flag.
Shanghai DERFLEX can produce blockout sublimation fabric with customized design, such as black back sublimation banner for printing , grey sublimation directly blockout fabric, black middle sublimation fabric and so on.
DERFELX backlit fabric enhanced image resolution process competible with ecosolvent ink, solvent ink, Latex ink, UV and sublimation ink , our premium Backlit Fabric is printed with dense color, text clarity and contrast that is unmatched in the printing industry.
Product
item
Gram weight
Width(cm)
Roll length(m)
Compatible ink
Shanghai DER New Material Co., Ltd is a professional Textilene Mesh Manufacturer and exporter in china, that is concerned with the design, development and production of textilene fabric .
1 Introduction of the textilene table mat,
Textilene refers to a synthetic material composed of a mixture of polyester (the fibers are sheathed with PVC) which can withstand the weather and UV rays.
2 Advantage of the textilene fabric supplier
Textilene is smooth surface, bright colors, waterproof, anti-oil, anti-ultraviolet, non-toxic, cool, wear, long life and low prices.
3ã??Specification of the� Textilene Mesh supplier
1)70%PVC and 30% high polyester
2)Color: according to your requirement
3)Max width: 300cm
4)Roll length: 50m
4ã??Application of the� textilene manufacturer
The textilene used for Sandy beach mesh, curtain mesh, PVC mesh, leisure chair mesh, technical mesh, place mat, table mat, bag, tent and etc
Stock solution aramid 1313 flame retardant and fireproof fabric weft woven air layer high temperature resistant fabric
650gsm aramid 1414 flame retardant wool fabric heat insulation fire resistance high temperature protection high-performance fabric
a. permanent heatproof and flame retardant, with good heat protection and no drops with fire, no toxic gas.
b. Together with conductive fibre and excellent anti-static.
c. permanent anti-erosion of acid, alkali and organic solvents
d. with high strength, high abrasion resistant and high broken strength
e. The fabric will be thick while burning, it will enhance sealing with no broken.with good breathability and lighter
f. good laundering durability, non-fading, non- deformation, stable construction
Fabrics for fire protection clothing lining
plain weave/twill weave/satin weave
Unit: 100g-350g per square meter
Width:1.5meters
Color: orange,ary green,white black ect..... and we can make other colors according to customers' requiresThis fabric can be used
for fireman suit, army uniform, rescue uniform, petrochemical industry uniform and also for metallurgy, casting , welding, and
flying industry.
Standard: GB 8965.1-2009,EN11612,EN11611,EN469:1995,NFPA 1971
Aramid Fabric Technical index:
1.Color fastness to washing: Dope dyed 5 Grade or above, Piece dyed 4 Grade or above
2.Color fastness to perspiration: Dope dyed 5 Grade or above, Piece dyed 3 Grade or above
3.Color fastness to Rubbing:Dope dyed 5 Grade or above, Piece dyed 4 Grade or above
4.Color fastness to Light: Dope dyed 4 Grade or above, Piece dyed 3 Grade or above
5.Shrinkage to washing: more or less 2%
*Inherent flame retardant ;
*Anti static;
*High temperature resistance;*Resistant to Chemicals;
*No melt or drop with flames and no toxic gas;
*Cut resistance ;
*Good laundering durability, good fastness, stable construction
Airgrande filter media are made of different fibers and scrims, such as PE, PAN, m-Aramide, PPS, PI, PTFE and glass fibers, they are used in various conditions according to gas condition and emission requirements. According to different requirements, filter media can be treated through singing, calendaring, ePTFE membrane, anti-static, water, oil repellent, etc.
We have filter media for any type of industrial dust filter. The cloth width is up to 2.5 meters. The weight is from 300-950 g/m2. We can produce filter media according to your requirements.
The advantages of Airgrande filter media:
1. Long service life
2. Constant pressure drop
3. Dimensional stable and mechanically resistant
4. Easy elimination of dust cake
5. Required dust emission
Quick description
Type
Geotextiles
Geotextile type
Non-woven
Raw material
Pet , pp or as customer request
Producing craft
Screw extrusion , spray forming, needle punched
Place of origin
Shangdong, china
Brand name
Oem
Model number
Snw350
Color
White and as your requirement
Weight
100-800gsm
Thickness
0.8-5.5mm
Roll width
2-6m
Length
50-100m/roll or at request
Certification
Iso9001:2008
Sample
Available
Package
Woven geotextile and as your requirement
Project
Road paving, railway , air port, river bank , tunnel
Function
Reinforcement , filtration, separation, drainage
Packaging detail
Packed in roll or as customer's requirements
Standard
Gb/t 17639-2008/astm/ce
Specification datasheet
Snw350 specification data
Property
Test method(astm)
Unit
Mass per unit area
D5261
Gsm
350
Thickness
D5199
Mm
2.7
Tensile strength
D4595
Kn/m
11
Elongation
D4632
%
50
Aos
D4751
Mm
0.07-0.2
Permittivity
D4491
Sec-1
Trapezoidal tear strength
D4533
N
240
Cbr puncture strength
D6241
N
1500
Uv resistance
(% retained after 500 hours)
D4355
%
50
Woven/knit and non woven fabric and its relative products like disposable medical products, home/hotel textiles, essential oils, household appliances, kitchenware, fiberglass mesh cloth, etc..
