There are three designs for Wire Mesh Welder, Manual Feeding,Semi-automatic Feeding and Automatic Double-molds Feeding;
Manual Feeding:
Manually place the work piece, and feed it lo the welding station. start the welding machine to weld the work piece in a row. then push it to the next station until finish the whole work piece. ThiS type is with low cost and high work intensity.
Semi-automatic Feeding:
Manually place the work piece, automatically feed it to the welding SlaIion, and weld the work piece in a row, then automatically push it to the next station until finish the whole work piece.The finished parts will return automatically, or return from back.This type can improve the productivity, reduce the work intensity and improve the quality.
Automatic Double-molds Feeding:
The application of advanced PLC and flexible man-machine interface controlling and the precise servo motor driving system makes it available on continuous automatically feeding and welding It is with front and back two layers table, so when one layer lable is in welding work,the other can be applied to place the work piece. then change the work after welding. It effectively improves the work efficiency. and also it can weld the different specifications of metal wire mesh conveniently through adjusting the man-machine interface.
Application:
In this modern society, metal wire mesh is widely applied in express way, sport fields,golf,park,villa,farm.etc. Our metal wire mesh welder applies microcomputer controlling technology by Mitsubishi PLC.
Metal Wire Mesh: can be applied in fence welding of high way, railway, tennis court, palestra. farm.etc.
Hardware: can be applied in welding of all kinds of electroplate,paint shelf,exhibition shelf,barbecue mesh,etc.
Storage Shelf: can be applied in shelt welding of heavy goods shelf. warehouse cage, shopping cart,etc.
Optic fiber clamp for fiber cable, power cable, double type 6 holes
Optic fiber clamp for fiber cable, power cable, double type 6 holes
Model: TEL-OFC-003
Description:
Combined cable clamp for fiber optical cable(FO) and power cable(DC)
Telsto optic fiber clamps are used to fix power cable and fiber optical cable at the same time. Itâ??s available for power cable: 10-14mm, Optic fiber cable: 6.8mm. It can fix three fiber cables and three power cables at most. The C-shape bracket and pressing board are compact and terse. It is simple to fix the cables reliably.
Features/Benefits
l Customized products
l High quality materials
l Total fastening
Optic fiber clamp for fiber cable, power cable, double type 6 holes
Hansen 50ohm RF 50 1/2´ Regular Standard Coaxial feeder Cable
Hansen 50ohm RF 50 1/2 Regular Standard Coaxial feeder Cable
construction
inner conductor material conpper clad aluminum wire
dia. 4.80±0.05 mm
insulation material physically foamed PE
dia. 12.20±0.30 mm
outer conductor material ring corrugated copper
diameter 13.80�±0.20 mm
jacket material PVC or fire retardant PE
diameter 15.80�±0.20 mm
mechanical properties
bending
Apple Nano Touch Technology
Advanced and practical: Different from infrared technology, it solves the problem of incorrect touch caused by chalk dust falling on the infrared frame or blocked by the sleeve.Precise touch: higher precision and better sensitivity. Compared with the infrared touch technology invented 25 years ago, it has better stability and more advanced.Convenient operation: Meet with teachers' daily habits, support multiple people writing on it at the same time, five-finger erasing, ten-finger switching screen.
Green-eye protection
Edutech Smart Blackboard also has the advantage of eye protection. Our company used spectrum shift technology to completely remove blue light of 415 to 455 nanometers that is harmful to human eyes. This ensures green and healthy eye protection and has Chinese optic protection accreditation. There is no safety or maintenance issue because the screen is blast proof and scratch proof. The screen is also anti-glare. The display effect is very lifelike because our product uses 4K High Definition display screen.
Six-in-one application software, easy to operate
Edutech Smart Blackboard contains a six in one software with functions of documents camera, electronic whiteboard, wireless projection, PowerPoint annotation and replay. By clicking one button, the user can employ the according function. For example, when teacher is about to demonstrate a test paper or courseware, the teacher only needs to gently put the paper on the documents camera platform and click "Projector". It is also easy to operate when the teacher wants to annotate while explaining the courseware. Just directly annotate on it! For example, the sixth question's answer is C. You can directly write on the screen to annotate. If you want to explain one specific question, it is also quite simple. Just click Snapshot and crop out the fourth question and insert it into the whiteboard. Then, you can continue to explain and make further annotations. The whole process is very easy and convenient.
High-cost performance
Edutech smart blackboard has high-cost performance, including not only the traditional touching function, but also the functions of computers, high-speed cameras, etc. You can write on the whole page when the power is turned off.
4K high-definition display
Scratch-proof
Our smart blackboard is scratch-proof and solves the storage problem of the equipment.
2678 Communication Suppliers
Short on time? Let Communication sellers contact you.
1~2 Channels L-band Satellite Optical Transceiver
Introduction
CLB satellite L band signal optical transceiver consist of transmitter and receivermainly convert the L-band analog signal or digital signal from LNB of satellite antenna into optical signal, and transmit it via fiber in fully transparent, high quality and long distance methodMainly apply in space satellite, military satellite live satellite L-Band fiber uplink /downlink
Features:
1. Use in multiple antenna signal transmission such as C band, KU band etc., transmit 1~2 channels 950MHz~2150MHz satellite signal
2. Adopts 19 1U standard frame chassis, the color LCD on front panel shows the information of optical power, temperature, working voltage, input or output RF Level etc.
3. For LNB, transmitter can supply power via RF port, on does not supply power for it, if supply power, the output voltage is +13V or +18V Max. output electric current is 450mA user can set it via LCD color screen
4. The LCD of optical transmitter can show optical transmitting power, LD working electric current, the temperature of optical transmitter, the output Voltage for LNB, Input RF signal level
5. Optical receiver can supply power via RF port, input voltage is +13V or +18VMax. Output electric current is 300mAalso can supply power via the AC220V dual power supply of the equipment
Cybervision CHM-4K series Ultra HD-SDI optical transceiver consists of optical transmitter CHM-4KT and Optical receiver CHM-4KR for transmitting 1 channels 4K ultra HD-SDI signal , or 4 channels 3G ultra HD video, and downward compatible with SD-SDI with bit rate of 143, 177, 270, 300, 1485Mbps etc.
With circuit reducing the signal jitter at CHM-4KR, it can deal with the distorted signal well, it can provide more than 120m automatic balance for 3GMbps signal, more than 250m for 270Mbps signal.
With built-in distribution amplifier, CHM-4KR provides 2 channels output.
CHM-4K supports SMPTE178 standardpassed the test of SDI pathology.
Features:
1. Supports SMPTE424M, SMPTE292M, SMPTE259M
2. Supports 3G-SDI/HD-SDI/SD-SDI/DVB-ASI
3. The best solution for live casting by connecting with 4 channels 3G-SDI
4. With cable equalize at the input/Output, it can make up the loss of cable transmission
5. With circuit reducing the signal jitter, it can deal with the distorted signal well. Input/output cable transmission distance can be up to 120m@3G (BELDEN8281 cable)
6. LCD at both transmitter and receiver show working status, it is convenience to operate and maintain:
1) Optical interface type;
2) laser working wavelength;
3) transmitting/receiving optical power;
4) working temperature;
5) input/output working status of each channel signal;
6) voltage of dual power supplies for main board;
7. With clear working status, there are LED indicators on panel for input SDI signal, optical signal, power supply.
8. Supports SMPTE178 standardpassed the test of SDI pathology
9. Dual power suppliers can be selected, which can supply power independently, backup redundantly
10. Network management can be selected, support SNMP and web monitoring
Multi-Function Digital Audio Optical Transceiver
Introduction
Cybervision CA021 Multifunction digital audio optical transceiver consists of digital audio transmitter CAT and digital audio receiver CAR for transmitting 2 channels analog audio and 1 channel digital audio AES/EBU in high-fidelity. In the process of transmission, analog audio convert to digital audio via A/D, and transmit it in digital method. At the receiving end, it outputs 2 channels analog audio and 1 channels AES/EBU digital audio.
Multi-channels audio optical transceiver with compatibility with analog and digital can be customized.
Features:
1. Be able to transmit analog audio, and digital audio also, automatically identify and switch digital and analog audio at input end, digital signal is priority.
2. Output digital audio and analog audio at same time
3. 24 bit digital decode
4. Audio output balance/unbalance automatically convert; ESD protection, it is more safety and reliable for using
5. LCD in both transmitter and receiver show working status:
1) Optical interface type;
2) laser working wavelength and optical power of transmitter
3) receiving wavelength and optical power of receiver
4) working temperature of optical transceiver and optical modules;
5) Level working status of each channel input/output audio;
6) voltage of dual power supplies for main board;
7) At the optical receiver, the working status and optical link loss of transmitter can be checked
6. System topology can be point to point, point to multi-point
7. Large analog audio dynamic scaleï¼?Max. input/output audio can be up to +18dBm or +24dBm
8. There are LCD for monitoring.
9. There are LED indicators on panel for input/output audio, optical signal, inner statusand, power supply.
10. Power supply support hot back, how swap.
Inner Communication System Optical Transceiver
Introduction
CA-D inner communication system can construct an optical transmission system by connecting with the equipment with some distance fiber; it can realize the function to transmit multi-channels audio and data signal in two-way via one fiber, extend the transmission distance of ClearCom and Drake brand inner communication system
Features:
1. Support Clear-Com and Drake Brand Inner Communication System
2. Transmitting 8 channels audio and 8 channels control data in two-way via single fiber
3. 24bit digital codec
4. Single level transmission distance can be up to 100Km (standard configuration is 40Km)
5. Large audio dynamic scaleMax. input/output audio can be up to +18dBm
6. There are LED indicators on front for input/output audio signal, optical signal, status in the equipment, and power supply
Waders For Saltwater Fishing Custom Attributes
1. Colour: customized/optional
2.Feature: Adjustable Belt/100% water proof/anti-slip boots
3.OEM: Yes
4.sample: Available
5. Gender: Unisex
6. Logo: Customized
7.Usage: Hunting, Forest, Fishing, Offshore work, Chemical industry,or other usages
8. Custom size: accept
9. Delivery date: 15days
10. Price: Competitive
Characters
1.Not easy to aging, not easy to open the glue;
2.With wear resistance, not easy to be scratched, very easy to repair;
3.Acid, alkali and oil resistant, will not be corroded by acid and alkali;
4.Good quality, light weight, more comfortable wearing on the body;
5.The quality is stable, the price is relatively reasonable.
Main Applications
Suitable for sailors, dockers, aquaculture, fishermen, waterways workers, sewer workers, plumbers, shipbuilding employees, ship launches, pond maintenance, plant care work, nature lovers and other workers in wet and muddy conditions, which requires a protective layer to prevent liquids or hazardous materials.
Advantages
Top fabric with environmental protection technology
2.Not stiff, more comfortable to wear with excellent elasticity
3.Acid and alkali resistant, wearable, aging resistant, corrosion resistant, tear resistant
4.The texture is thick, and the material quality is guaranteed
5.High grade with good workmanship
Factory Overview
DERDEX was founded in 1998 and located in Yancheng, Jiangsu province, China. We are specialized in manufacturing waterproof clothing with experience of more than 20 years, such as fishing waders, raincoat, rain boots etc. We have more than 30 thousand square meters of factory workshop with more than 600 employees and more than 30 professional and technical personnel to ensure production capacity.
All the options and are more of an upscale quality but with a medium price point
Clamp & grommet mount
Wire management
Quick assembly including branded assembly instructions
Quick release vesa mounts
Quick clamp assembly - top to buttom
Gas spring arms
Premium packaging including branding if required
40-45 day production time
Fob shanghai
Moq 100 pieces per style / per model /per color
Color choice white silve black
