This model of weighing indicator adopts plastic case, wiht good quality and powerful functions. It has weighing function, counting function, accumulation fuction and check weighing function.
Real time o?lock and RS232 interface
Auto calibration
Low power detect, charging status indication
Approval model with 3000
Up to 30000 display resolution
Simple counting
Check, management weigh
Auto switch on off
Hold function
Basic function:
High precision a/d conversion with readability to 1/30000
Easy to set and read the inner code for observing and analyzing tolerance without using weight
Special software to enhance the anti-vibration ability
Zero-tracking range set , zero(auto/manual) range set; zero-tracking speed set;. The velocity of zero adjustment could also be set.
Setting digital filter velocity, range and stability period
With counting function, weight saving protection against power failure
Multi-type backlight selectable
Rechargeable and indication of remaining battery power
Low power protection
With a 6v/4ah battery without maintenance
Rs232 interface optional, baud rate selectable, communication mode selectable
20ma current loop scoreboard interface optional
Recommendation
Kg/lb display selectable
Automatic average calculation
2 fixed value output for low speed weighing check
Ultra mini size with multi-function
Checking, animal weighing , parts counting, percentage, accumulating , weight hold , preset tare
Version:
Mini-e led display with 0.56' ;and 15 led diodes indication
Mini-l lcd display with 0.8' and 25 indication
Parameters:
Plastic front face and steel back
Size:170*78*40mm
Mini-l (0.8â??lcd, 25 indication); mini-e (0.8â??led, 15 indication)
5 function keys
1/60000 high s-? a/d conversion
2 rs232;
4 units: kg , g, lb, oz
8 at 350 ohm load cells connection
Linearity calibration on or off
3.7v2.6ah li rechargeable battery
Extend optional:
Connect to rs232 wireless to connect
With display or pc
632 Baby Weighing Scale Suppliers
Short on time? Let Baby Weighing Scale sellers contact you.
In our company, we have the stock of Diesel flow meter of all calibers. From this, it is not hard to find that our company has sufficient funds and our products sale good. Nowadays, there hardly exist companies who own the ability to keep stock. But we dare and have the strength to do that.
ITEM SPECIFICATION
MODEL WAW-25
EACH CARTON WEIGHT 10KG AND 20KG
CARTON SIZE (L*W*H) 381*290*230MM, 381*290*330MM
PUSH EMPTY CARTON BY MANUAL
WEIGHT TOLERANCE (20-25KG) AROUND 50G
CONTROL PLC PROGRAM CONTROL WITH TOUCH
SCREEN
When weighting to 10kg or 20kg, the system will close the valve automatically and send the carton with powder to outside through driven rollers for packing.
Sst20 inclinometer based on vigors advanced tilt measurement technology, to meet with low cost, high reliability and volume application, performs high performance-cost ratio.
Sst20 employed most universal & mass-produced components, casting aluminum alloy house, universal high reliability m12-5pin industrial connector; full epoxy seal with ip69k protection, auto-test/calibration equipment which not only ensure delivery speed, also keep the consistency of goods.
Thanks for vigor engineers, they adopt advanced technologies as:
- cae/eda simulation;
- modal test for both housing and pcb to eliminate resonance due to vibration;
- comprehensive performance & function test for component & firmware;
- calibration technology based on sst300 high accuracy inclinometer;
- refer mil/ en/ iso/iec standards to enhance sst20 durability & reliability.
Sst20 support remote diagnosis without disass embling. Mtbf more than 10 years per time. Can work in 10m submersible depth long time and has better emc ability.
Sst20 output rs485/ca
n/canopen and voltage/curre
nt signals. Better power management to meet with automotive /truck/vehicle application without regulated power.
Oem service is available with calibrated pcba or mil qualified.
This model is mainly used for balancing rotating work pieces, Such as large and medium- sized motor rotors, blowers, pump impellers, centrifugal, drying cylinders, and rollers, mine ventilator etc. The gimbals -driving offers several rotational speeds, large driving power, high precision and easy operation etc.
Specification Parameter:
Mass scope of workpiece(kg) 2000
Mass diameter of workpiece(mm) 1800
The distance between two bearing pedestals(mm) Min100
Journal diameter on roller carriages(mm) 40-240
Distance from coupling flange of drive shaft to center of farthest bearing (mm) 1800
Spindle speed(r/min) 280/560/900/1800
Motor Power(kw) 7.5(variable-frequency)
Universal coupling torque(N.m) 300
Minimum achievable Residual Unbalance(emar) 1g.mm/kg.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, turbocharger,textile machinery, fans,shaft, etc .. Driven by belt,it is simple to load and unload,quick to start and with high precision and low failure rate.
Specifications:
Parameters
Max Mass of Workpiece (kg)
50
Max Diameter of Workpiece (mm)
700
Distance between Two Support Bearings (mm)
80--700
Journal Diameter Scope of Workpiece (mm)
8~80
Diameter Scope of Driving Belt (mm)
18~200
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min)
650/1000/1300/2000
Motor Power (kw)
0.55/0.75
Min Achievable Residual Unbalance Amount (emar)
0.5g mm/kg
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, impeller,roller,textile machinery, fans, shaft, etc. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate.
Specifications Parameters:
Max Mass of Work piece (kg) 160
Max Diameter of Work piece (mm) 1000
Distance between Two Support Bearings (mm) 150--1200
Journal Diameter Scope of Work piece (mm) 10~140
Diameter Scope of Driving Belt (mm) 30~350
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 798/1274/1596/2548
Motor Power (kw) 1.3/1.8
Min Achievable Residual Unbalance Amount (emar) 0.5g mm/kg.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, crankshaft, textile machinery, fans, shaft, etc .. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate.
Specifications Parameters
Max Mass of Workpiece (kg) 50
Max Diameter of Work piece (mm) 700
Distance between Two Support Bearings (mm) 80--700
Journal Diameter Scope of Work piece (mm) 8~80
Diameter Scope of Driving Belt (mm) 18~200
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 650/1000/1300/2000
Motor Power (kw) 0.55/0.75
Min Achievable Residual Unbalance Amount (emar) 0.5g¡¤ mm/kg.
