Garnet sand for waterjet cutting of honest horse brand
We have more than 10 years experience of garnet sand production and sale. Honest horse garnet is rock garnet mined from natural garnet rocks 200 meters underground.
Micro grains of garnet like grade are perfectly suitable for the water jet cutting media in the industrial purpose. Uniformity in grain size, hardness, and sturdiness result in cutting-edge quality, optimum efficiency and low economics. It is perfectly suitable for the applications given below.Carbon steel, stainless steel, marble, ceramics and road painting
Garnet sand for waterjet cutting suitable for:
Most metal surfaces
Wood
Plastic
Rubber
Glass
Natural stone and concrete
Turbine blades
Fibreglass hulls
We have more than 10 years experience of garnet sand production and sale. Honest horse garnet
Is rock garnet mined from natural garnet rocks 200 meters underground.
It goes through crushing, magnetic separation, washing and drying production procedures.
Being crushed from natural garnet rocks, our garnet sand has high hardness and sharper
Edges. With many times magnetic separations to remove impurities, it keeps high qualified red
Grains. Then several times washing removes the powder away. After screening of sifting bed,
Each size has the uniform particle distribution.
Garnet sand size:
Normally
We also can produce according to your size distribution requirement
Garnet sand production technology:
Crushing--magnetic separation--washing--drying--screening
Zircon sand is generally found in land of ancient coastlines,some of which can be found very far inland,where the heavier mineral sands formed hardened deposits.These deposits are typically mined via dry or wet(dredge)mining techniques.
Typical chemical analysis:
ZrO2+HfO2:65.5-66.5%
Fe2O3:0.04-0.07%
TIO2:0.15-0.19%
Al2O3:0.40-0.90%
P2O5:0.06-0.09%
SiO2(Total):32.2-33.2%
Free SiO2:0.25-0.45%
Physical Properties
Refractive Index:1.93-2.01
Specific Gravity:4.6-4.71g/cm3
Mohs Hardness:7.5+
Melting Point:2340-2550
Packing:30/40kgs pvc bags+1mt big bag
Main Applications
Foundry Ceramic Chemical Glass Refractory abrasive washing/Cleaning/Blasting and nuclear industry etc
Available Sizes:60-100mesh 80-120mesh 100-200mesh 200-325mesh 200mesh 325mesh 2000mesh
389 Sandstones Sands Suppliers
Short on time? Let Sandstones Sands sellers contact you.
South Africa chromite sand casting
South Africa chromite sand casting , Originally from South Africa ,is a special kind of sand for casting , chromite sand casting is a natural spinel mainly composed of chromite , Chromite sand casting used as a highly fireproof sharpener for moulds and cores.
Purpose
1 foundry industry
Its properties enable the material to be used in high duty grey iron and steel foundries as core and mould making sand.
2 steel industry
In steel production, Chromite Sand Casting is used as well filler for protection of the sliding gate in large steel holding ladles.
3 glass industry
When ground to a fine flour, Chromite Sand casting is used for the production of green glass beverage containers
Alluvial River Garnet is not exposed to chloride contamination like Alluvial Beach Garnets. Itâ??s unique characteristics improve production rates, reduce abrasive usage, and lower disposal and clean-up costs.
The process of shell type steel filling (dry sand) is to put the shell type into the barrel and fill the steel balls (dry sand) around the barrel to reinforce the shell
A casting process in which a mold is formed and a molten iron is cast. Castings are cooled by steel pellets, the faster the cooling speed, the better the air permeability, the better the recovery of steel pellets, the smaller the equipment investment, the slower the die consumption, and the easier the mold change.
South africa chrome ore lumpy is a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Physical composition
Bulk Density 2.5-3g/cm3
Specific Gravity 4.0-4.8g/cm3
PH Value 7-9
The amount of the acid 2ML max
Percent soil 0.1%max
The sintered 1600
Filling Density 2.6g/cm3
melting temperature 2180°C
Available size
AFS30-35 AFS35-40 AFS40-45 AFS45-50 AFS50-55 AFS55-60 AFS60-65
Foundry chromite sand for foundry use as a highly fireproof sharpener for moulds and cores. Originally from South Africa. The sand is produced by crushing chrome ore and its washing in spiral concentrators, subsequent drying, dust cleaning, screening and sorting as per grain size.
Chemical composition
Cr2O3 46.0%min
SiO2 1.0%max
FeO 26.5%max
CaO 0.3%max
MgO 10.0%max
Al2O3 15.5%max
P 0.003%max
S 0.003%max
Cr/Fe 1.55/1
Chromite ore, also known as chromite ore, is a special sand for casting, is a natural spinel based on chromite, after crushing, grinding, screening into a specified size, suitable for molding (core) sand.
Foundry chromite sand is a natural process products of chromite through the broken screen classification, chrome ore, its main chemical composition of cr2o3, this kind of sand heated volume stability, high thermal conductivity, when in contact information with the molten metal, not only has good resistance to basic slag, not with ferric oxide and other chemical reactions, and itself has the characteristics of the solid phase sintering, can be a very good prevent the infiltration of molten metal, avoid to touch sand defects, suitable for all kinds of stainless steel, alloy steel and carbon steel gradually shape the original sand core and coating.
Step1: chrome ore raw material is processed by water washing.
Step2, drying raw materials to remove water;
Step3, drying raw materials into the vibrating screen, screening out the size of the customer needs;
Step4, the size of the sieve for magnetic separation, the purpose of iron and silicon removal. After magnetic separation, the chromium content reached more than 46% and the silicon content was less than 1%.
Step5: package the finished product.
Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries.
Details:
Details:
1.Place of original: HENAN?china
2.Material: Almanding garnet.
3.Real Density: 3.96-4.2g/m3
4.Bulk density: 1.96-2.15 g/m3
5.Melting point: 1300
6.Conductivity:
