This machine is applicable to sew the thin moderate thickness cotton, wool and chemical fiber fabrics and light-weighted leather goods, well-designed, customized with perfect performance, the machine operates smoothly with character of low noise, and nice to use, its automatic lubricating system and oil volume valves spare parts and accessories, which convenient to users in purchasing the spare parts. It is the ideal sewing machine for garment manufacturers, caps and shoes manufacturers.
Type: Knitting Needle
Place of Origin: Zhejiang, China (Mainland)
Brand Name: xindew
Model Number: XDPK-002
Material: Plastic
Length: 35cm
Size: 5.0mm-10.0mm
Packing: one pair per OPP bag,500 pairs per carton
Delivery time: about 25 days, or accordding to order quantity
Type: Knitting Needle
Place of Origin: Zhejiang, China (Mainland)
Brand Name: xindew
Model Number: XDHH-004
Material: Bamboo
Length: 15cm
Size: 3.0mm-10.0mm
Packing: One PC Per PVC Bag or 12 PCS Per OPP Bag,Then Put
Delivery time: about 25 days, or accordding to order quantity
Type: Knitting Needle
Place of Origin: Zhejiang, China (Mainland)
Brand Name: XINDEW
Model Number: XDBKN-003
Material: bamboo
Packaging: one pair per PVC bag
Delivery Detail: 30days
115 Tattoo Needles Suppliers
Short on time? Let Tattoo Needles sellers contact you.
Type: Knitting Needle
Place of Origin: Zhejiang, China (Mainland)
Brand Name: xindew
Model Number: XDSKN-001
Material: Steel
Length: 20cm
Size: 2.0,2.5,2.75,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5.mm
Packing: 5pcs/size/bag,1set 11size, 55pcs
Delivery time: about 30 days, or accordding to order quantity
Type: Knitting Needle
Place of Origin: Zhejiang, China (Mainland)
Brand Name: xindew
Model Number: XDBC-002
Material: Bamboo, and steel wire
Length: 80cm,100cm,120cm..
Size: 3.0mm-12.0mm
Packing: one PC per OPP bag with Back card.
Delivery time: about 20 days, or accordding to order quantity
The following is the operation of the product
1, insert the used syinge needle to the destorye mouth.
2.Move the handle down to close the destroyer mouth and cut off the needle
3, move the handle up to open the destroyer mouth, now the needle has been destroyed, 4, move the handle to facilitate needle falling into the container
The following is more detail information of our products:
For the valve hole accuracy 1 m hydraulic needle valve, although AAK is 20% more expensive, its service life is twice that of its peers
At the beginning of this year, Samuel asked by email about the production time of 1,000 hydraulic needle valves, He specially emphasized that the technical parameters of the hydraulic needle valves need to be the same as those samples made before, especially the valve hole accuracy must be 100% within 1 m or less. Samuel has been cooperating with AAK for 3 years. It is the first time that he deliberately emphasized as such in email. After communication, I learned that the hydraulic needle valves that AAK made samples for last time was 20% higher than that of other hydraulic valve manufacturers, so he placed the order with another manufacturer. However, now this batch of hydraulic needle valves have been complained by customers that the hydraulic winch is stuck. The root cause is that the accuracy of the hydraulic needle valve holes is uneven, and some are less than 1 m, and some higher than 1 m. After the original hydraulic needle valves were replaced by the manufacturer, complaints still continued. The boss was very dissatisfied with Samuel's purchase this time and asked him to source another hydraulic needle valve supplier.
Samuel can only get back to AAK, because the sample accuracy of AAK hydraulic needle valve hole was 1 m or less. I told Samuel that the shipment of AAK hydraulic needle valves has never been lower than the sample standard. The next day, Samuel sent us the PO of 1,000 hydraulic needle valves. After 45 days, AAK delivered 1,000 hydraulic needle valves.
Last week, Samuel sent an email saying that AAK hydraulic needle valves had been installed on the equipment for more than half a year, and no complaint was received. His boss would rather spend 20% more cost and must purchase the hydraulic needle valves with valve hole accuracy 1 m for 100%. I told him that even if AAK hydraulic needle valve is used properly in another year, it will not get stuck.
Samuel was surprised at how AAK ensured 100% accuracy of the hydraulic needle valve hole within 1 m? For the control of the manufacturing quality of hydraulic needle valves, AAK's 3 characteristics lead the majority of hydraulic valve manufacturers.
1. On the processing equipment, the valve hole is finished with the TAMIX one-time tool walking high-speed ultra precision honing mill imported from Japan, which is thoroughly ground without traces. In mass production, the wear-resistant SPA tool effectively ensures the stability of processing, and the valve hole accuracy is guaranteed to be 0.8-1.0 m and the surface roughness reaches Ra0.2-0.3.
2. In the processing process, AAK has more than 10 years of experienced technicians with special machines and special personnel, who have engraved the dimensional accuracy of each element in their minds.
Carter comes from an manufacturing company in , and the purchase of hydraulic needle valves has been smooth in recent years. At the beginning of last year, an excavator sold by their company for less than 6 months was complained by customer. The boom of the excavator falls too fast due to its own weight, which is easy to cause danger. Their technician found that there was a problem with the hydraulic needle valve of the hydraulic system. There were obvious wear marks at the contact point between the valve spool and valve seat of the hydraulic needle valve, which was easy to leak. The leakage of the hydraulic needle valve will cause the oil saving and speed limiting circuit of the hydraulic cylinder to be uncontrollable. The boss was very angry that the equipment sold for only half a year was complained and asked Carter to find out the cause of the hydraulic needle valve problem and solve it.
Carter contacted the original manufacturer of the hydraulic needle valves and requested to replace the hydraulic needle valves. The manufacturer said that the service life of hydraulic needle valves under 450bar working condition is basically 6 months. The only way to solve this complaint is to replace the hydraulic needle valves every 6 months. Such reply made Carter speechless, because his customer would not accept the high-frequency replacement of hydraulic needle valves, which not only brought a bad user experience, but also the after-sales cost was not cheap. Carter contacted all of his hydraulic needle valve suppliers, and they all replied that they were not sure to achieve a hydraulic needle valve with a service life of 1 year under the working condition of 450bar.
When browsing the website, he found and left a message on the How long is the service life of hydraulic needle valves with pressure resistance of 450bar We replied directly for 1 year or more. The next day, he told the problems encountered in purchasing hydraulic needle valves at the beginning of last year in detail. After receiving the drawing of the hydraulic needle valve, we found that the hydraulic needle valve needed by Carter has much higher requirements than the ordinary hydraulic needle valves. We replied that will select specific materials for samples, which can ensure that the hydraulic needle valves can be used for more than 1 year under normal conditions. If possible, he can directly test the samples.
Material: plastic and led light
Length:13", 14"
Size:6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 10.5 mm, 11 mm, 13 mm, 15 mm
Color: colorful
Moq: 500 pieces
Price: fob ningbo usd 1.89-2.4/piece
1.It is suitable for mattress panel, mattress pad,bedspreads,comforters,bedding ,upholstery and more.
2.New fabric loading design, easy loading material.
3.Tilted body design, easy to operate and maintain.
4.Thread brake detector.
5.Using air cylinder for thread cutting tail length.
6.Operated using high quality sealed bearings that do not need lubrication.
7.Adjustable presser foot lifting mechanism enables you to quilt a broad range of material thickness.
8.Emergency safety devices.
9.Improved quilting software control system allows more precise and stable quilting operations.
10.CAD pattern drawing pattern system allows you to create your own designs.
11.Machine comes with 100-300 design patterns.
12.Error problem detection system.
13.Pattern compensation.
Model SS-2500
Size (length*width*height)5100*1500*2000mm
Weight 4500kg
Quilt width 2450mm
Rotation speed 600-1200RPM
Production speed 80-230m/h
Needle type120/21,140/22,160/23,180/24
Needle arrangement (50.8,76.2,127)(76.2,76.2,152.4)
Max.horizontal movement 450mm
Needle space 25.4mm
Power supply 380v/220v 50Hz/60Hz
Stitch size 2-7mm
Quilting thickness ¡Ü80mm
power 7kw.
The following is the operation of the product
1, insert the used syinge needle to the destorye mouth.
2.Move the handle down to close the destroyer mouth and cut off the needle
3, move the handle up to open the destroyer mouth, now the needle has been destroyed, 4, move the handle to facilitate needle falling into the container
The following is more detail information of our products:
The following is advantage of the syringe needle destroyer
1.It is used for processing after using needle . so the product is helpful to protect the environment and useful for hospital,medical organization and government.
2.The product is manual operation ,not electrical,so it not only can save the electric power but also more safety.
3.The cutting edge can be replaced, and it can cutting more than 50,000 times of needles according to the Quality Inspection Center Test Report (ICTR).
4.The materials of products is stainless steel. Which is not rust and looking very beautiful.
The following is the operation of the product
1, Insert the used syringe needle to the destroyer mouth.
2.Move the handle down to close the destroyer mouth and cut off the needle
3, Move the handle up to open the destroyer mouth, now the needle has been destroyed, 4,Move the handle to facilitate needle falling into the container
The following is more detail information of our products:
(CE Cettificated)Min Order QuantitY:3000Units
N/W: 0.814KG/UNIT
Volume of the container: 350ml
Size of the cutter:16.5*8.5*14cm
Quantity of the needle hub:900-1000pcs according to the size of the needle hub
Samples delivery Time: anytime
Products delivery Time: according the quantity you ordered.
Payment Terms: T/T
Package: 46.5*45*17cm 10box/ctn, G/W:10.8KG/CTN
A new generation model designed for a quiet and smooth performance, the machine delovers improved seam quality, the room operable is wider, reliability and beautiful seam. It features a distinstive reverse feed mechanism, make you sewing thin material without crinkle and thick material without break thread. This machine is characterized for heavy-duty operation through its auto-lubricating system with stable feature and low noise as high speed of operation.
