OR-KRV310 Household Intelligent Sweeping Robot is light in design and easy to operate. It can be controlled remotely by infrared remote controller or APP. Built-in high-precision gyroscope, like a compass, can navigate the sweeping route, to ensure that the sweeping robot in the sweeping process to reduce leakage. The three processors cooperate with each other to collect and process sensor information synchronously. By locating and calculating, the map is constructed in real time and the sweeping path with edge first and Z glyph is formed. It is suitable for wood floor, tile, marble and other home environments.
Characteristics :
Gyroscope navigation planning, bow shaped sweep path, smooth path planning, low repeat route.
Ultra thin 5.6cm design, strong performance. The ultra thin body can clear the bottom of the bed, cabinet, sofa and so on.
The dust box water tank is two in one, the dust box capacity is 350ml, the water tank capacity is 150ml, no space is wasted, dust removal and water exchange are done once.
Wet and dry, one step in place. The mop is made of microfiber material for better water absorption and water retention.
Upgrade mobile APP, smart control system more simple and smart, one key to start, control anytime anywhere.
One key to start the automatic cleaning function, all-round automatic cleaning, when the power is less than 20%, the machine will automatically return to charge.
About 1000PA strong suction, can suck hair, paper scraps, dust and so on.
The machine is equipped with a down vision sensor around the head and four anti falling designs to protect the machine.
Equipped with 10 sets of sensitive anti-collision sensors, slow down when encountering furniture.
The off-road drive wheel has strong grip and can easily cross obstacles such as lines and carpets in the room.
The working noise is low.
Up to 2000mAh lithium battery, it can maintain super long cleaning time. Once charging, it can sweep the whole house easily.
OR-KRV310 Household Intelligent Sweeping Robot is light in design and easy to operate. It can be controlled remotely by infrared remote controller or APP. Built-in high-precision gyroscope, like a compass, can navigate the sweeping route, to ensure that the sweeping robot in the sweeping process to reduce leakage. The three processors cooperate with each other to collect and process sensor information synchronously. By locating and calculating, the map is constructed in real time and the sweeping path with edge first and Z glyph is formed. It is suitable for wood floor, tile, marble and other home environments.
Characteristics :
Gyroscope navigation planning, bow shaped sweep path, smooth path planning, low repeat route.
Ultra thin 5.6cm design, strong performance. The ultra thin body can clear the bottom of the bed, cabinet, sofa and so on.
The dust box water tank is two in one, the dust box capacity is 350ml, the water tank capacity is 150ml, no space is wasted, dust removal and water exchange are done once.
Wet and dry, one step in place. The mop is made of microfiber material for better water absorption and water retention.
Upgrade mobile APP, smart control system more simple and smart, one key to start, control anytime anywhere.
One key to start the automatic cleaning function, all-round automatic cleaning, when the power is less than 20%, the machine will automatically return to charge.
About 1000PA strong suction, can suck hair, paper scraps, dust and so on.
The machine is equipped with a down vision sensor around the head and four anti falling designs to protect the machine.
Equipped with 10 sets of sensitive anti-collision sensors, slow down when encountering furniture.
The off-road drive wheel has strong grip and can easily cross obstacles such as lines and carpets in the room.
The working noise is low.
Up to 2000mAh lithium battery, it can maintain super long cleaning time. Once charging, it can sweep the whole house easily.
OR602 is wet and dry dual-purpose dust suction and water suction machine. It is suitable for hotels, large workshops, factories, shopping malls, car wash and other industries. The machine designed with 2 motors of 2000W strong suction, stainless steel barrel, crush resistance, durable, longer life.
Characteristics ï¼?
· The stainless steel tank is strong and durable.
· With a powerful lower-noise motor, the vacuum cleaner has a specially strong suction.
· New-style large wheel plate.
· It is stable and beautiful, a complete set of accessories are supplied with vacuum cleaner.
· The barrel body is made of high quality stainless steel seamless welded with beautiful appearance. Stainless steel barrel body is resistant to fall, corrosion resistant and easy to clean.
· The lock design is simple and practical, and the hose can be easily inserted or removed with one hand.
· Equipped with waterproof and anti-leakage switch, it is more reliable to use.
· The barrel body is anti-static and can effectively prevent the motor from being damaged.
· Equipped with a powerful and quiet 2000W dual motor, strong suction.
· New wide base, more stable.
· Steady and beautiful, all the accessories are available.
· Built-in vacuum filter, made of non-woven material, can be used repeatedly. The dust filter has a high index and collects dust more thoroughly.
OR-P100A is especially suitable for using in hall, waiting hall, hospital, factory, pavement and etc.
There is no dust, noise when it is working. The flexible sweeper with light and smart construction can walk easily among crowd also it can be maintained easily.
Characteristics :
· Sweeping width of 1,000mm, efficiently clean your ground.
· Integrated with sweeping and vacuuming in one, fully functional, and watering function is optional.
· Main brush can be adjusted without tools, easy and convenient to use.
· High-power motor, effectively control dust.
· Adopt the new material for the tyre, prolong the service life.
· The simple operate panel makes easy operation.
· Compact structure and ergonomically designed to ensure maximum operation comfort.
· Foldable push rod, convenient storage.
Our induction lamp is better than led lighting. Saving 30% energy with the same watts of led lighting. The span life is more than 10 years, 5 years of garantia. The watts is from 18w to 400w, and the light eficience is more than 80lm/w, color temprature is 2100k-6500k, the cri>80 (ra), it is better for the outside lighting, especially for street light, tunnel light, highbay light, flood light etc.
Our induction lamp is better than led lighting. Saving 30% energy with the same watts of led lighting. The span life is more than 10 years, 5 years of garantia. The watts is from 18w to 400w, and the light eficience is more than 80lm/w, color temprature is 2100k-6500k, the cri>80 (ra), it is better for the outside lighting, especially for street light, tunnel light, highbay light, flood light etc.
Wattage: 5W, 8W, 10W,13W ( 1w=45 lumens)
Cap / base: E26/E27/E14/B22
Voltage: 110~130, 220~240V
Color temp.:2700k, 4200k, 6400k, blue, green, redDia. (mm):63 Length (mm):115
Cap color: Transparent, Abrasive Sand
lampshape: we could according to your request to produce them
Average life time: 15,000hours
Silent design, operating quieter.
Special structural design can discharge impeller through return air.
Fan coil can be repaired, and has seasonal maintenance cleaning.
WAII unit for use with MS-pressure series.
There are four models available for options.
1. On the basis of request, return air box can keep new drafts.
2. On the basis of request, condensation water plate can be increased the length and the valve is in the water plate.
3. On the basis of request, condensation water plate can use stainless material.
Functions & properties:
Excellent stabilization and dispersion, equally lubricating inside and outside, bring excellent processing property and stabilization in light and heat, materials color is hard to change as well. Xxc-1a can effect as compatibility. Xxc-1ah had capacity of color up earlier and widely processing range. Xxc-1as xxc-1hf have a fast plasticization, so the melting liquid will be plasticized more even, the processing property and physical capacity will be better, the products will get high welding angle and smooth surface.
Referenced usage:
Put this product resin and other additive into high speed compounding machine till the temperature reach 120-130
Package:
Krafe paper sack with braided bag as liner 250.2kg/sack net
Storage:
Store in dry place, prevent from sulfide
Metal oxidate content%>=38
Package:
Krafe paper sack with braided bag as liner 250.2kg/sack net
Power AC devices such as laptop computers, portable TVs, stereos and fax machines from a vehicle's cigarette outlet. The inverter takes the car's 12 volt DC power and converts it to 110 volts AC. External on/off switch, power LED and overload indicator.
Housing jacket: pvc 2.4*4.8+/0.2mm
Insulation: pp 0.96*/-0.01mm
Conductor:5*0.1copper/ccs; 4*0.1 tinsel
We can produce according to the dimension of customers
Our sentry hd recovery card is an innovative hard disk protection product, which can dynamically safeguard hd data and instantly recover them. There are various modes available for data protection, recovery and updating. It can prevent virus, fdisk, low-level formatting from damaging hard disk data. Moreover, it can protect cmos settings
Major features
Prevent virus, fdisk, low-level formatting from damaging hard disk data. Data can be dynamically kept and restored at your discretion anytime. In several seconds shall update data and recovery be completed. Provide various flexible recovery modes, such as auto recover, manually recover, timing recover, reserve data and fully open mode.
Provide bios configurations auto detection and recovery function. Support hard disk copy, facilitating batch installation. Support multiple operating systems, such as windows 95/98, windows nt, windows me, windows 2000, windows xp.
Support multi-partition protection. Support big hard disk larger than 120g.
Support multiple file formats, such as fat12, fat16, bigdos, fat32, ntfs, etc.
Support various hard disks, such as ide, eide, sata, support dma33 / 66 / 100/133 high-speed hard disks.
Hardware requirements
Cpu: 386 or higher compatible pc
Hard disk: 50mb remaining space or more available
Ram: 8 mb or more
Bus expansion slot: at least one pci idle expansion slot available
Software requirements(operating system)
Windows 95/98, windows nt (service pack 4), windows me, windows 2000, windows xp
EV charging cable usually refers to Mode 3 cable, which plugs into a wall box or charging station for an AC charge. It does not include an inner-cable control box, instead, it has two plugs at both ends, one for connecting into the electric vehicle and the other for an EV charger. Consumers are often required to bring their own Mode 3 cable to use public AC charging stations
There are mainly two categories of charging cables, Type 1 to Type 2 and Type 2 to Type 2. provides both. Type 1 to Type 2 means one end of the cable is compatible with Type 1 inlet of the car while the other end suits for Type 2 outlet on an EV charger; Type 2 to Type 2 means one end of the cable is compatible with Type 2 inlet of the car while the other end suits for Type 2 outlet on an EV charger.
We have two series of charging cables: MS series and WS series. Each series contains Type 1 to Type 2 and Type 2 to Type 2. The wire can be straight or spring. The length is usually 16 feet/5m by default. You may customize the length, color or wire kind of the cable, the color or logo pattern of the plug, and the box, sticker, tag or any other related aspects of the packaging as long as MOQ is reached.
Our WS045 series portable EV charger supports Level 2 charging for electric vehicles with the power of 8.8 kW, applicable for most regions on this planet , etc. It supports 32A and 40A current level, suitable for different charging environments.
It has passed IP66 and IK10 certifications. The ABS+PC Plastic shell is solid and durable. You may customize the cable length, color, logo, the packaging box, sticker, tag or any other related aspects as long as MOQ is reached.
Built on the CE standard, our portable charger is equipped with vehicular communication and safety protection.
Our unique charging display allows users to know the various charging status and makes safer charging available.
DLAA automotive lamps, specializing in the production of automotive LED. Including front and rear headlights, retrofit lights and fog lights. One of Nissan suppliers in China.
QL-ROS series LTE wireless routers adopt a new generation of wireless technology solutions, with stable performance and richer functions, which can bring users more experience. 2.4G wireless transmission rate is 300M. Provide 1 USB 2.0 data interface, 1 MICRO SD (TF) card interface, 1 MINI PCIE interface, 1 SIM card interface, with better functional scalability. The MINI PCIE interface can load 5G modules according to customer needs, and can support a maximum 5G transmission rate of 867Mbps (depending on the module). It can also load 3G and 4G modules, and dial-up Internet access through the built-in SIM card. The USB2.0 interface can be connected to a USB storage device, and a USB network card can also be mounted to dial the Internet. The wireless signal covers more than 50 meters in an open environment, with 130 contacts. Simultaneously 40 users.
