Magnesium metal series including: Magnesium ingot, Magnesium granular, Magnesium powder, passivation Magnesium granular.
Chemical composition: Mg;99.90%min, Mg;99.95%min ,Mg;99.99%min
Magnesium Ingots : 15kg/pc 7.5kg/pc 1kg/pc
Magnesium granular, Magnesium powder: 2mm-0.015mm
Packing: 1000 kg per woven bag or up to customer's requirement.
Application: metallurgical casting, Military industry and metal instrument manufacture, in desulfuration and producing of magnesium alloy, also can be used in chemical industry.
Produce as customers requests.
We can supply various kinds of magnesium related products .Such as magnesium ingot, magnesium alloy, magnesium granular(powder), etc.
Magnesium ingot as below:(note:customers special request available!)
Magnesium ingot
Mg:99.9%min.
Al: 0.02%max.
Si 0.02%max.
Mn 0.02%max.
Magnesium ingot size: 7.5kg+/- 0.5kg
High purity magnesium:
Mg:99.95%min. Al: 0.0040%max. Fe 0.0045%max. Si 0.0070%max.
Ni 0.0010%max.
Mn 0.0070%max.
Cu 0.0030%max.
Magnesium ingot size: 7.5kg+/- 0.5kg
Mg:99.99%min.
Al: 0.0020%max. Fe 0.0045%max. Si 0.0020%max.
Ni 0.0010%max.
Mn 0.0020%max.
Cu 0.0020%max.
Magnesium ingot size: 7.5kg+/- 0.5kg
Magnesium alloys such as :
Az91d, az91hp , az63 , za10, am60, am50, am20, ze41a and so on with the standard of gb/t5153-2003, gb/t19073-2003 and astmb94-92.
Magnesium ingot size: 7.5kg+/- 0.5kg
Packed on pallets with plastic covering and steel tape to tighten
Usage: used in electro, metallurgy and chemical industry.
1. Widely applied to refractory material and power metallurgy industry to improve the heat resistance, wear resistance and oxidation resistance. Products made of it are applied in steel smelting furnace, kiln hood and kiln furniture etc.
2. In the chemical line of organic silicon, industrial silicon powder is basic raw material that high polymer of organic silicon formatting. Such as using for producing organic monomer, silicon oil, silicon rubber antiseptic to improve the characteristics of insulating, corrosion-resistance and waterproof performance etc.
3. Industrial silicon powder is sublimated into monocrystaline silicon, which is widely used in hi-tech field as an essential raw material for integrated circuit and electronic element.
4. In metallurgy and foundry line, industrial silicon powder is regarded as to be iron base alloy additive, the alloy pharmaceutical of silicon steel, thus improve the steel hardenability
(1)no mark or mark as client's requirement
(2)1mt/bag or as client's requirement
(3)plastics woven bag
1248 Metal Alloys Suppliers
Short on time? Let Metal Alloys sellers contact you.
High saturation flux density
High permeability
Low coercive force
Low core losses(1/3-1/5 of silicon steel)
Low excitation current
Good thermal stability and aging stability.
High saturation flux density
High magnetic permeability
Low coercive force
Low core losses
Good thermal stability
Wear and corrosion resistant
High cost efficiency.
The material replaces silicon steel and its operating frequency can be up to 50Hz to 10KHz in case of working as various high and medium frequency transformer cores of different power. Working as high power switched mode power supply reactor cores, the operating frequency can be up to 50KHz.It is applicable in fields of high and medium frequency heating power supply, transformers of inverter welders, UPS, power transformers, switched power supply transformers and high energy accelerators etc.
The advancement in technology of high frequency inverters has culminated in several advantages. Some of those incl ude the physical size of the inverter being smaller, a lighter weight of the individual unit and a higher efficiency of the working unit. The main transformer is heart of a power inverter, with a working frequency up to more than 20kHz. The transformer, in the past, was made from a core of silicon steel, but that can no longer meet the technical requirements of today's industrial and technological world. Though Ferrite has a lower loss at high frequencies, but it has a lower saturation flux density and not much reduction in volume and weight, further more, the ferrite metals have lower curie temperatures and less thermal stability. In contrast, Fe-based nano-crystalline structure material has much better magnetic properties. This material integrates the advantages of silicon steel, NiFeNb alloy and ferrite resulting in high flux density, high permeability, low currency loss, and good thermal stability, making it the best material for manufacturing power inverter cores.
Our mainly export 75# & 72# fesi or other spec by buyer's option.We has already carried out steady operation in over 20 countries and regions, and have got many good opinions from new and old customers.
Fesi75:si:75% al:2.0% max mn:0.4% max. P;0.04% max
The product is used as compound deoxidizer, desulfurating agent and alloying agent in the steel-refining industry and as a reducer in the producing low-carbon ferromanganese.
CuCr1Zr UNS.C18150 Chromium Zirconium Copper C18150 is an excellent and unique copper alloy with high electrical conductivity, hardness, and ductility, moderate strength, and excellent resistance to softening at elevated temperatures. The addition of 0.1% zirconium (Zr) and 1.0% chromium (Cr) to copper results in a heat treatable alloy which may be solution treated and subsequently aged to produce these desirable properties. Rod is usually supplied from the mill in the fully aged and drawn condition so no further heat treatment is required by the fabricator. The softening temperature of properly heat treated C18150 rod exceeds 500ípC as compared to unalloyed pure copper which softens at 200ípC, and silver bearing coppers which soften at 350ípC.
This is a type of aluminum alloys wires containing approximate 12% silicom, which can be adopted in welding all kinds of forging and casting or extruded shape aluminum alloys. And it has advantages of low melting point and good fluidity which avoides the distortion after welding
This is a type of product is a widely used in general welding material with the magnesium of 5%, which can be use in jointing oe overlay forging and casting alloys processing.And this product is of high toughness, good forgeability, and well anti-corrosiveness. Furthermore, this is a good chioce for colour-match in welding after anodic process.
